The issue with the 2017-2020 Jaguar F-Type daytime running light (DRL) is a widespread defect where the left-side LED strip gradually dims or fails completely, often affecting the integrated amber turn signal as well. Affected Models: The problem specifically affects first-facelift F-Types (2017-2020) equipped with full LED headlights (manufactured by Valeo), rather than earlier bi-xenon models or the second-facelift cars. High Repair Costs: Because the headlight is a sealed unit and internal components are not...
Read the full complaint
sold separately, dealerships require a full headlight assembly replacement. Out-of-warranty replacements routinely cost between $3,000 and $5,000 per side. The Cause - Thermal Melting: Inside the headlight assembly, a dark/black plastic light-blocking component (known as an oculator) sits directly against the clear acrylic DRL light rod to prevent light leakage. Under prolonged, intense heat generated by the high-powered LEDs, this dark plastic melts and fuses into the clear light rod. Once melted, the dark plastic scorches the clear rod, physically blocking light from traveling down the strip. Roughly 85% of failures occur on the left side of the vehicle. Teardowns show that the internal packaging on the left-hand assembly has slightly tighter clearances between the oculator and the light rod than the right-hand unit, causing it to absorb and trap more heat. How We Know Jaguar Was Aware of the Problem: Despite not issuing a public recall or extended warranty program, owner investigations and part teardowns have revealed clear evidence that Jaguar (JLR) and its supplier (Valeo) know about the flaw. Jaguar discontinued the original defective part (part code PU2) and replaced it with an updated revision (coded PUXA). When owners opened both assemblies to compare them, they discovered that the new PUXA headlight swapped the heat-absorbing black plastic oculator for a lighter-colored/white component specifically designed to reflect heat and prevent melting.