Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2012 Kenworth T440 Problems, complaints & recalls

No owner complaints about the 2012 Kenworth T440 have been filed with NHTSA. It is covered by 9 recalls, the latest in February 2024 for the reservoir / tank.

NHTSA data checked

CAbout as many problems as a typical T440 year, for its age

Complaints
0
Recalls
9
Crashes
0
Fires
0
Injuries
0
Deaths
0

2012 Kenworth T440 recalls 9

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Service brakes: reservoir / tank

24V145000936 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
The risk
Insufficient air volume can reduce braking performance and increase the risk of a crash.
The fix
Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

Exterior lighting: brake lights

19V24300016,342 vehicles affected

The problem
Osco Tank & Truck Sales, Inc. (Osco Tank & Truck Sales) recalling certain emergency vehicles built on 2018 Peterbilt 348 and 2012 Kenwoth T440 chassis and equipped with Whelen brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
The risk
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
The fix
Osco Tank & Truck Sales will notify owners and dealers will replace the brake lights, free of charge. The recall began March 29, 2019. Owners may contact Osco Tank & Truck Sales customer service at 1-309-526-3636.

Exterior lighting: hazard flashing warning lights

15V45800012,551 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T440, T470, T660, T680, and T880 trucks manufactured January 14, 2010, to May 22, 2015, and equipped with HID Headlamps and the option for Daytime Running Lamps (DRL). The DRLs are required to deactivate when the hazard warning lights are activated, however, the DRLs on these vehicles override the hazard flashing functionality after the brake pedal is pushed for more than two seconds. Normal hazard flashing functionality returns once the service brake is released. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 108, "Lamps, Reflective Devices, and Associated Equipment."
The risk
If the hazard warning lamps are overridden by the DRL, oncoming vehicles may fail to be warned, increasing the risk of a crash.
The fix
Kenworth will notify owners, and dealers will update the cab controller software, free of charge. The recall began on September 167, 2015. Owners may contact Kenworth customer service at 1-425-828-5000. Kenworth's number for this recall is 15KWL.

Engine

15V3090004,823 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase pressures may cause the 90-degree elbow of the vent tube assembly to detach from the crankcase ventilation breather, possibly allowing engine oil to come into contact with hot surfaces.
The risk
If engine oil comes into contact with a hot surface, there is an increased risk of a fire.
The fix
Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Kenworth customer service at 1-425-828-5000, Peterbilt customer service at 1-940-591-4000 or Cummins Inc. at 1-800-343-7357. PACCAR's number for this recall is 15KWH and 515-G.

Visibility: motor

15V271000104,807 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.
The risk
As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.
The fix
PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.

Power train: park / neutral start interlock switch

14V00800085 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2011-2014 model year Kenworth T440 vehicles manufactured March 10, 2010, through September 23, 2013 and equipped with Allison transmissions, Cummins Westport ISL-G engines, and NAMUX2 software. In the affected vehicles, the engine harness may have been installed incorrectly rendering the neutral start interlock inoperable.
The risk
If the engine harness is installed incorrectly, the truck may be able to be started with the transmission in gear, increasing the risk of a crash.
The fix
PACCAR will notify owners, and dealers will inspect and correct the connection on the engine harness, as necessary, free of charge. The recall is expected to begin by early March 2014. Customers may contact PACCAR at 1-425-468-7400. Paccar's number for this recall is 14KWA.

Service brakes: check valve

12V02600015,932 vehicles affected

The problem
Paccar is recalling certain model year 2012-2013 kenworth t170, t270, t370, t440, t470, t660, t700, t800, w900, and peterbilt 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 vehicles, manufactured from january 31, 2011, through january 19, 2012, and equipped with bendix atr-6 antilock traction relay valves. In extremely cold conditions, these bendix relay valves may potentially develop internal leakage. Internal leakage can lead to air pressure being delivered to affected primary or secondary brake causing continuous brake application.
The risk
Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. Unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. Also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
The fix
Paccar will notify owners, and provide a temporary repair until bendix develops a permanent remedy. This service will be performed free of charge. The safety recall began on february 10, 2012. Owner may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Service brakes: quick release valve

11V2810003 vehicles affected

The problem
Paccar is recalling certain model year 2011-2012 kenworth t440 tractors manufactured between october 18, 2010, and february 9, 2011 for failing to comply with federal motor vehicle safety standard no. 121, "Air brake systems." The quick release air valve required in the full truck service brake air line gladhand connection may not have been installed. The omission of the quick release air valve may allow the full truck service brake air line gladhand release timing to exceed the threshold of 0.75 Seconds by 1/10th of a second, thereby failing to comply with the with the requirements of the safety standard.
The risk
The service brake of a towed vehicle or trailer may have a delayed release, increasing the risk of a crash.
The fix
Kenworth dealers will install the quick release air valve in the full truck service brake air line with gladhand connection. All of the vehicles have been repaired, therefore, an owner notification letter will not be issued for this campaign. The recall began on june 23, 2011. Owners may contact paccar at 1-425-468-7400.

Service brakes: slack adjusters

11V157000280 vehicles affected

The problem
Paccar is recalling certain model year 2011-2012 kenworth t270/370, t440/t470, t800, t660, w900 and c500 vehicles manufactured between october 18, 2010, and january 28, 2011. Certain cast iron slack adjuster housings, which transmit braking force from the brake chamber push rod to the brake cam tube, may include a flow notch in the handle portion of the housing due to an error during the casting process. A flow notch in the handle portion may reduce the effective cross section structure and cause the slack adjuster housing to fracture.
The risk
If the slack adjuster housing were to fracture, the wheel brake to which the slack adjuster housing is attached would no longer function, which could increase vehicle stopping distances, and if mounted on the steer axle, could cause the vehicle to pull to one side during braking, increasing the risk of a crash.
The fix
Dealers will inspect and replace the slack adjuster housing as necessary. This service will be performed free of charge. The safety recall began on march 30, 2011. Owners may contact kenworth at 425-828-5440.

What owners say

Be the first T440 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

No complaints about the 2012 Kenworth T440 yet

No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.

Kenworth T440: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20160600-C
20150700-C
20140900-C
20130700-C
20120900-C
20110700-C
20100100-A
All T440 years

2012 Kenworth T440 vs rivals

VehicleComplaintsRecallsCrashesGrade
2012 Kenworth T440090C
2012 Kenworth T660190CCompare
2012 Kenworth T8001100CCompare
2012 Kenworth C500130CCompare

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2012 Kenworth T440? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2012 Kenworth T440

Does the 2012 Kenworth T440 have any recalls?

Yes - NHTSA lists 9 recalls for the 2012 Kenworth T440: reservoir / tank (February 2024); brake lights (March 2019); hazard flashing warning lights (July 2015); engine (May 2015) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

How many complaints has the 2012 Kenworth T440 had?

None have been filed with NHTSA so far.

Is the 2012 Kenworth T440 a reliable vehicle?

Its Safety Index is 41 out of 100 (grade C: about as many problems as a typical Kenworth T440 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

What should I do if my 2012 Kenworth T440 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience