PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T680, T800, T880, W900 and W990 trucks. The rear axles may not contain oil.
Suspension
Kenworth W900 Suspension problems by year
5 complaints filed with NHTSA about the Kenworth W900's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Kenworth is recalling certain model year 2010 t2000, t660, t800 and w900 vehicles manufactured between july 30, 2009 and september 18, 2009. The rear axle outer end hub may have not been primed with oil properly during the rear axle installation process...
Paccar is recalling 130 my 2004-2009 t2000, t800, t600, w900 and t660 kenworth trucks built with an ag400 rear suspension, long stroke brake chambers, and wide base tires (super singles). These vehicles may develop an increase in lateral and vertical axle...
Kenworth is recalling 1,189 my 2009 t2000, t600, t660, t800 and w900 trucks. The axle u-bolts attaching the axle to the drive beam on certain ag380 rear suspensions may have received insufficient fastener torque during the installation process.
On certain trucks and tractors equipped with airglide high-articulation rear suspensions, the c65-1006 sway bar used in this rear suspension may experience a reduction in fatigue life due to either a manufacturing process or a high induced stress during an...
On certain heavy duty class 8 trucks, the suspension has transverse beam castings that may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and...
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
On certain heavy duty trucks equipped with replacement dana spicer tandem drive axle models ds463 and ds521, installed on vehicles from may 1, 2001 through february 1, 2002, an undersized attachment weld may fracture without warning.
Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.
Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation...
Vehicle description: heavy duty trucks equipped with design level 1, rockwell ff980 series front axle. The front axle hub flange can develop cracks due to high stress levels.
Vehicle description: heavy duty trucks equipped with kenworth airglide 200 rear suspension. Due to materials used in the sway bar arms and studs as well as the stud plating material, stress corrosion cracking and bending fatigue can occur in the rear...
Latest W900 suspension complaints
Tl*the contact owns a 2000 kenworth w900. The contact stated that the frame rail failed on three occasions. The dealer replaced them each time. The frame rail cracked and cut the power steering hose. The vehicle was parked when the contact noticed an oil leak. The current mileage is 211,000 and failure mileage was 108,000.
Consumer noticed at home. The front chassis was broke he could kill many people. Dealer has been notified. Please provide further information. Ts
Kenworth has a reputation of putting a custumer off untill warranty is out. All of these problems where to be addressed. And there are more. Hard to explain in short words. I do have documentation in the form of maint. Files with descriptive accounts of all problems , none of which have been accuratly repaired. I'v been into various shops concerning rr suspension, ride height prb. Has always been the issue. This effects every asspect of driveability, at first was thougth to be allignment but then started to notice...
Read the full complaint
similarities between the two when control valves started leaking down, after 15 or so trips to shop , I began to learn all I could about it. And after 50 or so times adjusting myself have found no real sollution. This has been a problem ever since the truck was new and is on the top of my list because not only does this creat a mechanical falure nightmare but is directly linked to certain saftey issues because trk is not very controlable. And have had several accidents due to vehicle handling and , I could talk in great lenths aboutit . Also the other items are very similar when it comes to safe opporation. Please contact me for further explanations and documentation. *Ak
Consumer received recall 01v051000. She made an appointment with dealership regarding this recall, and dealership informed her they had no information regarding recall. Please provide any additional information/attachments.*Ak
The truck has a vibration, which shakes bolts loose and the sleeper doors leaks. *Et
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data