Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2007 Mack CT Problems, complaints & recalls

No owner complaints about the 2007 Mack CT have been filed with NHTSA. It is covered by 7 recalls, the latest in April 2014 for the flasher unit.

NHTSA data checked

FFar more problems than a typical CT year, for its age

Complaints
0
Recalls
7
Crashes
0
Fires
0
Injuries
0
Deaths
0

2007 Mack CT recalls 7

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Exterior lighting: flasher unit

14V20800044,047 vehicles affected

The problem
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
The risk
A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
The fix
Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.

Trailer hitches: fifth wheel assembly

07V497000950 vehicles affected

The problem
On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
The risk
There is a possibility that the pivot bolt can become loose without the driver's knowledge. When this occurs, the driver Could drive away and the trailer could become disengaged, increasing the risk of a crash.
The fix
Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on january 28, 2008. Owners may contact mack trucks at 1-800-528-6586.

Suspension

07V05300086 vehicles affected

The problem
On certain trucks equipped with a 46k pound chalmers rear suspension, the adjustable torque rods used on the suspension may be brittle.
The risk
This may lead to a premature failure of the rod, which may result in a loss of control of the vehicle increasing the risk of a crash.
The fix
Dealers will inspect and repair the rods as required free of charge. The recall began on march 14, 2007. Owners may contact mack trucks at 1-800-528-6586.

Service brakes

07V05100037 vehicles affected

The problem
Certain trucks equipped with haulmax rear suspensions fail to comply with the requirements of federal motor vehicle safety standard no. 121, "Air brake systems." It does not meet the required stopping distance as specified in the regulation.
The risk
The vehicle could experience reduced braking performance as a result. If this warning is not heeded, a vehicle crash could occur.
The fix
Dealers will relocate the antilock braking system (abs) sensor from the rear drive axle to the front drive axle free of charge. The recall began on june 15, 2007. Owners may contact mack trucks at 1-800-528-6586.

Service brakes

06V3230003 vehicles affected

The problem
Certain trucks equipped with the tri-drive option fail to comply with the performance criteria requirements of federal motor vehicle safety standard no. 121, 'Air brake systems.'
The risk
The purpose of this standard is to insure safe braking performance under normal and emergency conditions.
The fix
The trucks will have the pneumatic system reconfigured. The recall is expected to begin on or before september 29, 2006. Owners may contact mack at 1-800-528-6586.

Service brakes

06V2710007,447 vehicles affected

The problem
On certain trucks equipped with a legris air manifold, the brass push-to-connect cartridge may unexpectedly separate from the plastic housing.
The risk
If the push-to-connect cartridge that supplies the air to the park brake chambers were to separate, then the brakes could unexpectedly apply increasing the risk of a crash.
The fix
Dealers will replace the air manifold free of charge. The recall began on september 27, 2006. Owners may contact mack trucks at 1-800-528-6586.

Parking brake: air

06V2320002,587 vehicles affected

The problem
On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. If the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button.
The risk
The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash.
The fix
Dealers will inspect the valves and replace it free of charge. The recall began on august 14, 2006. Owners may contact mack trucks at 1-800-528-6586.

What owners say

Be the first CT owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

No complaints about the 2007 Mack CT yet

No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.

Mack CT: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20080100-A
20070700-F
20060300-C
20050200-C
All CT years

2007 Mack CT vs rivals

VehicleComplaintsRecallsCrashesGrade
2007 Mack CT070F
2007 Mack CHN1120DCompare

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2007 Mack CT? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2007 Mack CT

Does the 2007 Mack CT have any recalls?

Yes - NHTSA lists 7 recalls for the 2007 Mack CT: flasher unit (April 2014); fifth wheel assembly (October 2007); suspension (February 2007); service brakes, air (February 2007) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

How many complaints has the 2007 Mack CT had?

None have been filed with NHTSA so far.

Is the 2007 Mack CT a reliable vehicle?

Its Safety Index is 18 out of 100 (grade F: far more problems than a typical Mack CT year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

What should I do if my 2007 Mack CT has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience