- The problem
- The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." If a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
- The risk
- The safety belts would not provide adequate protection to an occupant in a vehicle crash.
- The fix
- Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
Vehicle safety record
1988 Mazda 929 Problems, complaints & recalls
Owners have filed 36 complaints about the 1988 Mazda 929 with NHTSA, most often about the body, doors & structure (12) and the seats & seat belts (10). Those complaints describe 2 crashes, 1 fire and 2 injuries. It is covered by 2 recalls, the latest in May 1995 for the buckle assembly. For comparison, the 1989 has 37.
NHTSA data checked
DMore problems than a typical 929 year, for its age
#28 most complained-about 1988 vehicle
- Complaints
- 36
- Recalls
- 2
- Crashes
- 2
- Fires
- 1
- Injuries
- 2
- Deaths
- 0
Most common 1988 Mazda 929 problems
Share of all 36 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
1988 Mazda 929 recalls 2
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Resin molded front handles fail at the door latch actuating rod attachment, freeing the rod to fall inside the door frame. Subsequent lowering of the associated window may force the actuating rod downward and release the door latch.
- The risk
- Inadvertent actuation of the door latch causes the doorto open unexpectedly which could result in an occupant falling out of thevehicle.
- The fix
- Dealers will replace the door handle/latch assembly.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
36 complaints about the 1988 Mazda 929
Newest first, as filed with NHTSA by owners. Page 1 of 2.
When I start the car in the morning it idles about 2000 rpm then drops to 1000 rpm and revs back up to 1800 rpm and continues pulsate in neutral every second until you put it in drive. In drive it remains idling at 1500 rpm until you shut it off and restart. If the engine is not warm enough it starts over doing the same thing otherwise it begins to idle correctly. With the idle high it makes it very hard to stop the car. What can be done?*Ak
Very strong fuel vapor both internal/external third occurrence. First two, both resulted in replacing fuel rail and all injector seals. *Ak
Mazda seams to have a history of transmission failers what can the mazda owner do when mazda does not want to come clean check out http://www.Carcast.Com/cc/conference/ I also have a 626/turbo with a bad transmission. *Ak
While driving timing belt sheared off for the sixth time without a warning. This vehicle has been through a total of 8 belts. Dealer/manufacturer contacted. *Ak *ml
All 4 door handles on the outside broke. The doors cannot be open from the outside. The problem has been reported to the dealer. The problem has not been corrected. Recall# 93v174000, does not include rear door handles. *Ak
This failure only happens below 20deg f. Problem goes away when engine warm. On very cold startup, fuel drips rapidly and visibly from bottom of pressure regulator to valve cover. See odi id's 380248, 437128, 416832, 825336, 946072, 956814, 979475. Turkey dealers let car warm in garage before attempting to locate problem. Problem only occurs when part and/or fuel is uncomfortably cold. My dealer said "you have a gas leak" when I drove in. 2 Hours later they charged $25 and said there was no gas leak, even though I pointed to the part which drips.
The right rear outside door handle cannot open door. Dealer says that rear door handles are not part of recall 93v174000. *Ak
Consumer experienced fuel vapor smell coming into the vehicle while driving. Vehicle has been in and out of the dealer shop three times before correction was made, but all cost was to the consumer. *Ak the fuel injection system was replaced, consumer believes that the only repairs needed were the replacement of an old/cracked rubber tubing and to retighten the intake manifold bolts or the head bolts. When brakes are applied, consumer states it feels like driving over a bumpy road, dealer replaced front and rear brake pads, resurfaced rotors, and packed wheel bearings, at an earlier time the two front rotors had been replaced. *Slc
Consumer experiencing problem concerning reoccurring brake mulfunction due to rotor warpage every 3000 miles of wear; dealer notified and problem cannot be resolved. All cost still to the consumer. Dealer flush abs, replaced front and rear brake pads, calipers, rotors, and wheel bearings, however consumer states that symptoms of rotor warpage still exists. *Ak *tt
Outside rear door handles broke. Vehicle has been included under a recall on the front doors. The dealer has been notified. *Ak
When car is parked in forward, neutral and reverse the ignition key can be removed, an accident resuleted from this design.
Warped front brake rotors, causing vehicle to pulsate during braking. *Ak
While trying to get child out of vehicle the rear door handle broke, causing the door not to open.Owner is very concerned for safety. *Ak
DOOR FLEW OPEN WHILE TURNING A CORNER.
Recall 95v103005 for belt buckles. The parts have not been received. *Ak
The rear plastic door handle broke inside the frame, prventing the door to open from the inside and outside, recall # 93v174000. *Ak
While driving the door flew open and would not lock, it could have thrown someone out of the vehicle.*Ak
Vehicle was in an accident and when the vehicle was struck the seat belt did not operate like it should of had. The seat belt did not lock when the vehicle was hit.*Ak
Engine surged, brakes did not work, vehicle hit gas pump and caught on fire. Vehicle does not own vehicle, mr. Tomko is owner of garage involved in accident. *Ak
Ignition switch intermittently fails to start vehicle.
Brown mazda 95v103. Owner has been trying to have the vehicle serviced since the middle of december. Parts are not available or owners name is not on list. *Ak
FUEL INJECTORS ARE LEAKING OVER THE ENGINE. *AK
Idle air control valve broke, causing acceleration. Tt
While driving, automatic transmission failed needing complete replacement. Please describe details. Tt
Seat belt buckle is broken at press point. Please describe. Tt
Mazda 929: every year compared
All 929 years1988 Mazda 929 vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 1988 Mazda 929 | 36 | 2 | D | |
| 1988 Mazda 626 | 46 | 6 | C | Compare |
| 1988 Mazda 323 | 35 | 1 | F | Compare |
| 1988 Mazda RX7 | 24 | 0 | F | Compare |
| 1988 Mazda MX6 | 17 | 5 | D | Compare |
| 1988 Mazda B Series | 2 | 0 | D | Compare |
| 1988 Mazda Mazda | 1 | 0 | C | Compare |
| 1988 Mazda 323 Wagon | 1 | 0 | - | Compare |
| 1988 Mazda B2200 | 1 | 0 | C | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 1988 Mazda 929
Does the 1988 Mazda 929 have any recalls?
Yes - NHTSA lists 2 recalls for the 1988 Mazda 929: buckle assembly (May 1995); door (October 1993). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 1988 Mazda 929?
By the complaints owners filed with NHTSA, the most common problem areas are the body, doors & structure (12), seats & seat belts (10), fuel system (5).
How many complaints has the 1988 Mazda 929 had?
36 complaints have been filed with NHTSA, the first on September 28, 1994 and the latest on November 19, 2003. Of these, 2 describe a crash and 1 a fire, and together they report 2 injuries and 0 deaths.
Is the 1988 Mazda 929 a reliable vehicle?
Its Safety Index is 34 out of 100 (grade D: more problems than a typical Mazda 929 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Mazda 929 years have the most complaints?
1989 (37), 1988 (36), 1992 (36). See every Mazda 929 year compared.
What should I do if my 1988 Mazda 929 has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data