Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Transmission & drivetrain

2004 Mazda MAZDA3 Transmission problems

Owners have filed 27 complaints about the 2004 Mazda MAZDA3's transmission & drivetrain with NHTSA - 16% of all its complaints, most recently on June 1, 2015. They describe 1 crash, 1 fire and 1 injury. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.

Complaints
27
Recalls
0
Crashes
1
Fires
1
Injuries
1
Deaths
0

Transmission complaints

Transmission & drivetrainElectrical systemEngine & coolingFire

Clutch slipping, high rpms, not red lining. Transmission exploded causing engine fire and burning motor and electrical components.

Filed Incident Power train · Electrical system · EngineNHTSA 10722690
Transmission & drivetrain

I have car jm1bk12f64[[redacted]], mazda 3, 2004, 2.0L. I have a problem with the axle shaft of my car. I need to know if this car has recalls or warranty. I bought the car used in dealer of puerto rico but it was an import from the usa. *Js information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6)

Filed Incident Power trainNHTSA 10545589
Transmission & drivetrain

1) Driving at 60 mph on highway, at 4th gear. 2) Transmission failed to put power into the wheels, causing the car to decelerate rapidly even though rpm rises when throttle is pressed. Only 1st and 2nd gears are able to transfer power from engine to wheels. 3) Dealer refuse to replace transmission, even though malfunctioning of this particular part are apparent to many of the owners of this vehicle. *Tr

Filed Incident Power trainNHTSA 10408736
Transmission & drivetrain

After less than 40,000 miles the clutch in my 2004 mazda 3 failed completely and required replacement. The repair bill cost me $1,100. *Tr

Filed Incident Power trainNHTSA 10390510
Transmission & drivetrain

2004 Mazda 3 automatic transmission failures. 1St offense, it required a pcm valve/solenoid replaced., 2Nd offense: transmission lost 4th gear and wont shift into 4th gear. Car is in a shop for diagnosis. Only goes up to 35 mph if shift manually and in 3rd gear, otherwise it revs, jerks, stalls, etc . *Tr

Filed Incident Power trainNHTSA 10378690
Transmission & drivetrain

When driving on the highway, the transmission of my 2004 mazda 3 with only 84,000km died as it lost the ability to reach 3rd and 4th gear. This incident nearly cost me my life yet mazda canada would do nothing about it. What kind of company can not stand behind their product after such a near-fatal incident. Suffice to say that mazda will never get my business again. $3,200 Later, I'm still alive no thanks to mazda. *Tr

Filed Incident Power trainNHTSA 10350851
Engine & coolingTransmission & drivetrainElectrical system

Letter from congressman van hollen on behalf of constituent re safety problems (random stalling) with his 2004 mazda3 *tgw the consumer went to sears to purchase a battery thinking that was the cause of the random stalling, but was told the battery was fine and it appeared there was an electrical problem, but they were unable to figure out what it was. The consumer then went to the dealer and was told different things were wrong with the vehicle, which was causing it to stall. The consumer paid for the repairs, but weeks later the vehicle stalled again. The consumer also stated the clutch and transmission was replaced. *Jb

Filed Engine and engine cooling · Power train · Electrical systemNHTSA 10344349
Transmission & drivetrainSeats & seat belts

TRANSMISIN DAADA. *TR

Filed Incident Power train · Seat beltsNHTSA 10334759
Transmission & drivetrainBody, doors & structure

I have a 04 mazda 3 w/ automatic trans / driving into parking lot heard a loud noise , car quit moving , driver side axle was hanging / the engine had almost drop to the floor , vehicle was towed to a shop , they found out that the bracket which holds transaxle / engine , on driver side had broken !! It is a aluminum bracket with 3 bolts that carry all the weight of engine / transaxle it damaged both axle shafts , caused about $ 950.00 On repairs my concern is that it a very bad / poor / weak / design / the good thing it happened at low speed , if it would have broken at freeway speed it would have caused a major damage / accident !! *Tr

Filed Incident Power train · StructureNHTSA 10332666
Engine & coolingTransmission & drivetrain

Tl*the contact owns a 2004 mazda3. She stated that the vehicle could be driven as an automatic or a manual. While driving 20 mph in manual mode she attempted to shift gears, to no avail. She had to take her foot off of the gas pedal in order for the gears to release and afterwards the gears started to shift on their own. She was able to exit the freeway when the vehicle lost all power, but continued to accelerate. She was unable to stop the vehicle or make a turn. The vehicle began moving from one lane to another...

Read the full complaint

and accelerated through a red light to avoid a collision. The vehicle stopped accelerating within in a few minutes. The vehicle was towed to a local mechanic who diagnosed the failure as the intake manifold. The intake manifold melted, damaged the sensor and the catalytic converter. The mechanic replaced the catalytic converter, sensors, and the gaskets; however, she had to add oil to the engine because the engine light illuminated constantly. She took the vehicle back to the mechanic who stated that the engine also needed to be replaced. She contacted the manufacturer and filed a report; however , the manufacturer stated that they would not assist with the repairs. The engine was not replaced. The failure mileage was 25,000 and the current mileage was 75,000.

Filed Incident Engine and engine cooling · Power trainNHTSA 10316321
Transmission & drivetrainEquipment & accessories

Mazda 3 engine mounts continue to fail, and have been replaced twice in 4 years. *Tr

Filed Incident Power train · EquipmentNHTSA 10280428
Transmission & drivetrain

The car continues to move when placed in park even on a flat surface. *Tr

Filed Incident Power trainNHTSA 10269868
Transmission & drivetrain

I have a 2004 madza3 with 73,560 miles on it. The a/t light came on when I started the car. So I turn off the car and restarted. The a/t light didn't come on. I took it to the dealer and the tech found internal failure due to pressure control solenoid and needs rebuilt transmission. ( $3,700 Dollars !) The tech told me that 2003-2004 had problems with the transmission. He also said, that he had 3 to 4 per week, with customers coming in for...

Read the full complaint

the same problem. So my warranty ran out. But that's not the problem! The manufacturer knew about the problem, (back then) but didn't want to have a recall on the 2003 and 2004 madza3 transmission!! They knew it will cost them alot money!! The manufacturer figures that half of the customers usually only keep their car only 2 to 3 years and trade it in. The other half of the customers usually have extended warranty, so the manufacturer won't have to worry about the recall!! That's bad business!! I also look in the internet and found alot of customers with the same problem!! If this is not the right dept. Then please forward it to the right dept. Thank you *tr

Filed Incident Power trainNHTSA 10265345
Transmission & drivetrain

There were no major events that lead up to the failure, just normal commuting back and forth to work. The failure was my passenger side engine mount, which failed completely, 1 occurrence which happened just outside of the warranty window. No immediate side effect but long term ramifications due to stresses placed on other motor/transmission components still unknown. Motor mount purchased and replaced by myself. Old part not available. *Tr

Filed Incident Power trainNHTSA 10253127
Transmission & drivetrain

Automatic transmission/manual jerks when going from 1st to 2nd gear and after a period of hard driving the jerking stops. This should not occur in a quality vehicle like this one, however it shouldn't occur at all. Please provide me a solution to this annoying problem. Fyi: I have had the transmission flushed and new fluid added however the problem still remains..Help!!! *Tr

Filed Incident Power trainNHTSA 10226383
BrakesTransmission & drivetrain

2004 Mazda 3, brought brand new from dealer. Had rear brake problems, was fixed due to bad equipment/metal used for rotors or that was what I was told. Warranty covered. Now I am at just under 50,000 miles and my clutch needs replaced, cause they said I burned it up. Not covered by warranty. I told them over a year ago, that it whined/screeched when shifting from 1st to 2nd gear, but only when it was cold. Told they couldn't find anything wrong, just warm the vehicle up first. Now a smell something burning and they...

Read the full complaint

keep saying it was my fault. I'm the only one that drives it, going back and forth to work and dropping my kids off at school. Very frustrated, because I was told its going to cost over $1,000 to fix...... *Tr

Filed Incident Service brakes, hydraulic · Power trainNHTSA 10221569
Engine & coolingTransmission & drivetrainCrash1 injury

Car stalls at lights does not respond when accelerating have gone to back up and no response then car will just take off have had 2 accidents due to no acceleration fog and bugs in taillights airbag light on/off for no reason car has been to dealership for all recalls I am told I am not driving the car fast enough and am told I need to check my oil when I get gas. Too many problems to list dealer will fix but cannot duplicate some of the problems I experience have tried to contact manufacturer only to be put on hold to listen to zoom zoom music over and over. *Jb

Filed Incident Engine and engine cooling · Power train · Unknown or otherNHTSA 10170125
Transmission & drivetrain

The car is a mazda 3 2004 with 18000 miles. I bought my wife this mazda 3 in may of 2005. With 16000 miles. The car was running great and it is a pleasure to drive. 3 Days ago I started to hear a noise when you take your foot off the accelerator pedal. Sound is like a clicking sound that you made when you put your baseball cards on your bicycle tire. To make a long story short, the transmission is being replaced under warranty. *Nm

Filed Incident Power trainNHTSA 10137863
Transmission & drivetrain

Clutch shudders violently when attempting to engage. Is very pronounced on hills, inclines, and when attempting to engage clutch in an emergency situation, ie, need acceleration to pass, merged into traffic etc. As a result, the clutch will fail to engage properly and leave the driver and passengers in vulnerable position of not being able to move when expecting to. In addition, the car will roll back while on hills and get dangerously close to vehicles behind it since the clutch either engages resistantly or not at all. *Ak

Filed Incident Power trainNHTSA 10118867
Transmission & drivetrainSeats & seat belts

1.When adjusted driver's power seat continues to move forward even after adjustment switch is released, resulting in a potentially dangerous unintended and uncontrollable driving position for the driver.*Ak 2.While in the 'neutral' position, the automatic transmission shift lever is too easily moved uintentionally into the reverse position resulting in the vehicle abruptly and dangerously reversing its position and moving rearward unintentionally and without warning. The gear selector 'gate design' is faulty.

Filed Incident Power train · SeatsNHTSA 10113911
Transmission & drivetrain

1. Clutch really hard when pushed. (Sat in other mazda 3's and clutch was extremly soft) *dealer insisted that I burned it and wants to charge me $800 for labor. Went to a couple of people and they didn't think it was burned. Going to the dealer again.*Ak 2. Noise in the rear when I have people in the back. Makes scraping noise! Going to the dealer to complain. 3.When accelerating on a turn, the front of the car makes a boom booom boom boom noise, really loud. Went to a couple of friends working in shops and said...

Read the full complaint

it's my struts. Going to the dealer to complain! 4. Had to change two front window regulators. 5. 3Rd gear making noise when trying to engage into it. Going to the dealer to complain. 6.Back brake rotors giving a lot of dust then the front rotors. Not suppose to be like that!Going to the dealer to complain! 7.Exhaust loose, when stepping on gas it jags back and forth. Goin to complain in other words not satisfied with car, espeasially since it's brand new.. My car just reached 17000 miles, but all the problems happened earlier

Filed Incident Power trainNHTSA 10096403
SteeringTransmission & drivetrain

My car has had multiple problems. I have a mazda 3 which I purchased in december. About a month ago my car began hesitating on occassion when I was stopped at a stop light and then pushing the gas to go. I did notice after the third time the vehicle did this that the d light on the dashboard blinked. I do not know if they are linked but it would be odd if they were not. I brought my car in for the problem and they could not figure it out and had kept it for 4 days.At which this time they found a berring had...

Read the full complaint

gone bad my car has 12,600 miles at this point. I recieved my vehicle back and had to bring it back two days later for the berring. The berring was replaced and I was sent home again. Then two weeks ago we were driving the car my husband had it in nettural at a light and placed in manuamatic then directly in drive and the car made a loud sound that made us wonder if the transmission had fell out of the vehicle. Again we brought in to the dealership and again they could not replicate it and decided to replace a drive mechanism that deals with the electronic shifting of the vehicle. At the same time they replaced a recall part the o2 sensor on the car. Then today sept 1st I recieve a call stating a noise the dealer heard while running my car through the car wash is the front axles going bad. I am at a loss and frustrated and the mazda headquarters tells me they can't not diagonose the dealership is capable and the dealership tells me mazda headquarters for repair need to assist them. I have paid a lot of money in insurance for rental cars and I do not feel safe in the vehicle.*Ak

Filed Incident Steering · Power trainNHTSA 10088979
Transmission & drivetrainAcceleration & cruise control

Request for reimbursement for replacement of vehicle. *Mr the engine and power transmission shifted hard from 3rd to 4th gear and while doing so there was subsequent over -rev of the engine at any speed while in 4th gear when the accelerator was depressed in 4th gear. This would become a no-control situation. *Sc

Filed Incident Power train · Vehicle speed controlNHTSA 10091775
Transmission & drivetrain

Automatic transmission failed after 1,500 miles. Transmission began to shift very harshly and abruptly from 3rd gear to 4th gear. Eventually, I could not drive above 30 mph for fear of shifting into 4th gear. Dealer was initially unable to fix the problem, but eventually replaced the entire transmission. Car was out of service for a week. *La

Filed Incident Power trainNHTSA 10074489
Transmission & drivetrain

Vehicle overview: my 2004 mazda3 s sedan is not equipped with abs and has 16" inch factory wheels. The car has an automatic transmission. *Ak problem description: after aproximately 1800 miles of driving (city/highway), I began to notice slight discolored bands on each of the brake rotor discs at all four wheels. After another 600 miles of driving, I began to notice grooving in the places with the discolored bands. At this point, the groove could be felt by a fingertip. The grooves are visible on the...

Read the full complaint

outward side of each rotor. I have not inspected the opposite side of each rotor (the side that would be closest to the vechicle chassis) to verify grooving on either side. Efforts to correct: I have requested that my dealership inspect the brakes, and they have also noted the grooving. However, they claim that there is no fix for this other than re-surfacing each rotor. This will prematurely wear my braking components, so I declined this offer. Also, simply resurfacing the brake rotors does not address the issue of what is causing the grooving in the first place. Outcome: braking power and stability remain unaffected in spite of the grooves. However, the longevity of the brakes is diminished. I am uncertain what the outcome would be with continued grooving. This is a foreshadowing to premature brake component failure.

Filed Incident Power trainNHTSA 10072892

Mazda MAZDA3 transmission complaints by year

MAZDA3 transmission problems, every year

Had a transmission problem with your 2004 MAZDA3? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience