- The problem
- Dope, inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.
- The risk
- Decreased lighting visibility may result in a vehicle crash.
- The fix
- Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on july 28, 2009. Owners may contact dope, inc. At 1-626-272-1798.
Lights
2006 Mazda MAZDA6 Lighting problems
Owners have filed 8 complaints about the 2006 Mazda MAZDA6's lights with NHTSA - 4% of all its complaints, most recently on December 18, 2022. Headlights, tail lights, brake lights, turn signals and interior lighting failures.
- Complaints
- 8
- Recalls
- 2
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Lighting recalls for the 2006 Mazda MAZDA6
- The problem
- Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.
- The risk
- Decreased lighting visibility may result in a vehicle crash.
- The fix
- Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.
Lighting complaints
Car is mint for age. Stock oem hid style headlights failed, headlights are still clear. The turn signals failed and activated safetys. Ground plug under air filter assembly that is a piece of metal bolted to car with 5 wires that plug into it corroded so bad no ground connection and each of the wires made no connection to the plug. No info on how to diagnose and/or repair. Common problem. Took everything apart and soaked all corroded parts in a solution of CLR, everything put back together clean with dielectric...
Read the full complaint
grease. Numerous shops could not diagnose including 1 dealer. Said headlights needed to be replaced at $500+/ side parts only. Very common on the rare factory installed HID systems. Wiring is different.
Tl* the contact owns a 2006 mazda 6. The contact stated that the headlights were very dim, which made it difficult to see the road at night while driving. Ourisman mazda of rockville (located at 801 rockville pike, rockville, md 20852, 301-424-7800) replaced the headlight bulbs twice; however, the failure remained. The manufacturer was made aware of the failure and informed the contact that they were unable to assist with the repair. The approximate failure mileage was 90,000. The vin was invalid.
Low beam head lights aren't bright enough to see the road clearly
The low beam headlights stopped working. The bulb is functional but there is a problem with the connection . If I bang on the headlight assembly the bulb starts working
An extremely common problem with many vehicles is clouding of the plastic lenses over headlights. This problem is exceedingly severely bad on the mazdaspeed 6. The clouding cannot be repaired via headlight restoration kits as once it's removed, it comes back even worse after. The only solution is to replace the prohibitively expensive headlight assemblies. Since these assemblies include the hid headlights electronics (ballast) they are incredibly expensive. These headlights have been known to cloud and become...
Read the full complaint
completely worthless within a year or two. On my 8 year old vehicle the headlights are completely useless at night, the high beams produce less light than low beams on most other vehicles. The easy solution for mazda would be to recall the headlights and retrofit a lens (glass or otherwise) that will not cloud. My car is unsafe to drive at night due to the ineffectiveness of the low beams. *Tr
Tl* the contact owns 2006 mazda, mazda6. The contact stated that both plastic headlight lenses became oxidized. The vehicle was taken to an independent mechanic, who stated that the headlight assembly would not to be replaced or they would have to resurface the headlight lenses to correct the problem. The vehicle had not been repaired. The manufacturer had not been notified of the defect. The approximate failure mileage was 60,000.
The low beam headlights continue to go out. I have replaced them number of times. This is not just a problem with my car numerous mazda3 owners and mazda6 owners are having this same problem. This is especially dangerous when the lights go out at night. *Tr
The low beam headlamps on my 2006 mazda 6 have repeatedly gone out on my in the past year. Many times while driving. This last time I tried to replace the low beam headlamp and the bulb was not blown. I inserted the new bulb and it still doesn't work. This is a problem for mazda 6's and 3's my parents are going on their 9 bulb in the mazda 3. According to many mazda forums this is a recurring problem for a number of other owners as well. This must be addressed driving at night is difficult enough but when your lights go out it makes it down right dangerous. *Tr
Mazda MAZDA6 lighting complaints by year
MAZDA6 lighting problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data