- The problem
- Vehicle description: passenger vehicles. The bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle.
- The risk
- The condition can result in a loss of power steering assist, increasing the risk of a crash.
- The fix
- Dealers will inspect the vehicles to insure that the bolt is tightened. For those bolts not properly tightened, the bolt and pulley will be removed and inspected for any indication of damage. Components showing any signs of damage will be replaced and the bolt tightened to the proper torque. Owner notification began november 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mitsubishi america at 1-888-648-7820.
Engine & cooling
1999 Mitsubishi Mirage Engine problems
Owners have filed 13 complaints about the 1999 Mitsubishi Mirage's engine & cooling with NHTSA - 23% of all its complaints, most recently on October 8, 2003. They describe 1 crash, 0 fires and 0 injuries. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 13
- Recalls
- 2
- Crashes
- 1
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Engine recalls for the 1999 Mitsubishi Mirage
- The problem
- Vehicle description: passenger vehicles: mirage model vehicles equipped with 1.5L engines; montero sport models equipped with 3.0L engines; and montero models equipped with 3.0L engines. The bolt securing the crankshaft pulley can become loose and the pulley could fall off the vehicle.
- The risk
- The condition can result in a loss of power steering assist, increasing the risk of a crash.
- The fix
- On the mirage vehicles, the dealers will install a new, improved crankshaft pulley bolt on the older engines. On new engines which already have the improved bolt, the dealer will tighten the crankshaft pulley bolt to the correct torque specification. On the montero models, dealers will tighten the crankshaft pulley bolt to the correct torque specifications. If the bolt is damaged, it will be replaced.
Engine complaints
ENGINE PROBLEM. *AK
Purchased 1999 mirage from thompson ford and was not notified that the vehicle was on a recall. Automobile was purchased in november 2000. Subsequently , pulley bolt completely broke and the entire pulley and belt fell out. This was the first incident, exact days unknown, however month and year are accurate. In april 2003, vehicle stopped. Was informed by thompson ford that the vehicle wsa not under warranty only to find out approximately 10 days later that it was. Vehicle was taken to thompson ford after...
Read the full complaint
another mechanic had serviced the vehicle and could not find the problem. Thompson ford replaced the piston and this did not solve the problem. Vehicle was sent to a authorized dealer where they replaced a valve and sensor, however the vehicle still does not run. Failure of thompson ford to notify me of the recall upon purchase could have resulted in a serious accident or death as at the time I purchased the vehicle I was commuting. I became aware of the recall in 2002 following the pulley bolt breaking and costing considerable monies for repairs.*Ak
While driving driver suddenly lost all steering. Took vehicle to dealer, and dealer stated problem was related to the crankshaft pulley. *Ak
Consumer purchased vehicle one month after the recall regarding the crankshaft pulley bolts was distributed, 00v311001. Consumer received the recall notice almost a year later in august of 2002. In july the bolt broke in half and came out. As a result of the bolt breaking, damage was done to the head gasket. Consumer returned the vehicle to the dealer for repairs. The extended warranty would not cover the repairs. The bolt was not covered. The vehicle had a coolant leak. There was no power. The belt and the pulley were missing. *Jg
Engine was making a clicking noise. It sounded like timing belt was moving too fast for wheel. Dealer rebuilt engine first time, and it was back to making the same noise. Consumer was asking dealer for an appointment. *Ak
While holding brake pedal enigine suddenly accelerated into a pole. This has happened twice. Second time a garage door was hit. Air bags did not deploy in either incident. *Ak there was a recall ( 00v311001) for possible loose crank shaft pulley bolt and the dealer reinstalled it. *Yh
Recall 00v311000/crankshaft pulley bolt: recall notice received and contacted marietta mitsubishi in marietta, georgia; phone # 770/953-4660 for appointment. Dealer informed that consumer was responsible to pay for repairs, and be reimbursed through manufacturer. Asking nhtsa to look into this matter. Please feel free to provide any further details on this matter. *Ak
The car has major loss of power when accelerating, the transmission skips gears when you start going ,the brakes are bad after only 7,000 miles
Vehicle experiencing problem with hesitation during a stop postion. Vehicle been in dealer shop on several occasions, and informed that nothing can be done. Please provide further details.*Ak
Consumer have a constant problem with engine lag at take off.The manufacturer and dealership will not solve the problem. *Et
When aproaching a stop sign / stop light, the vehicle will shut off when trying to accelerate. Dealer cannot find the problem.
When accelrating, the engine misses, lacks power, and the car is jerky
While driving at highway speeds in the middle of traffic, vehicle suddenly stalls, and sometimes will just die. Dealer has been contacted, and told consumer the problem cannot be reproduced. *Ak
Mitsubishi Mirage engine complaints by year
Mirage engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data