- The problem
- Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag or pusher axle the gross axle weight rating, suitable tire and rim information, and recommended tire pressure information. Without this information, the vehicles do not comply with the requirements of 49 C.F.R. Part 567, "Certification."
- The risk
- As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.
- The fix
- Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1-940-591-4000. Peterbilt's number for this campaign is 1113-F.
Vehicle safety record
2005 Peterbilt 378 Problems, complaints & recalls
No owner complaints about the 2005 Peterbilt 378 have been filed with NHTSA. It is covered by 5 recalls, the latest in November 2013 for the labels.
NHTSA data checked
DMore problems than a typical 378 year, for its age
- Complaints
- 0
- Recalls
- 5
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
2005 Peterbilt 378 recalls 5
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- On certain non-abs equipped trucks, an air hose between the tractor protection valve and the back of the cab bulkhead was omitted.
- The risk
- The absence of this air hose could adversely affect the drive axle brake performance while a trailer is being pulled, resulting in longer stopping distances, increasing the risk of a crash.
- The fix
- Peterbilt will inspect the air hose plumbing of the drive axle brake system and make the necessary repairs. The recall began on february 22, 2007. Owners may contact peterbilt at 1-940-591-4196.
- The problem
- On certain tractors equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.
- The risk
- The oil line may be cut on the cylinder head causing an oil leak and a possible fire.
- The fix
- Caterpillar, in conjunction with paccar, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309-675-6496, kenworth at 425-828-5440, or peterbilt at 940-591-4201.
- The problem
- On certain trucks equipped with the bendix electronic stability control (esp) system, the system uses multiple sensors and an electronic control unit (ecu) to control vehicle under steer, over-steer, and rollover situations. The system relies on vehicle sensors to be functioning and aligned properly. The steering angle sensor has the potential to be misaligned with the steering column shaft, thereby providing incorrect information to the bendix ecu.
- The risk
- This condition could affect vehicle throttle control and braking, thereby leading to loss of vehicle steering control which could cause a crash without warning.
- The fix
- Because of the immediate and substantial risk, kenworth and peterbilt dealers will first deactivate the yaw control feature of the bendix esp system preventing inadvertent esp activation. When parts are available, the steering column will be replaced to insure proper alignment of the steering shaft sensor and the full esp system will be reactivated. The recall began on december 7, 2005. Parts to complete the remedy are estimated to be available in early 2006. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4201.
- The problem
- On certain heavy duty class 8 trucks, the suspension has transverse beam castings that may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and the suspension's transverse beam may drop down low enough to contact the road surface.
- The risk
- This could cause sparks that could potentially ignite and cause a fire.
- The fix
- Dealers will inspect and replace the defective transverse beam assemblies free of charge. The recall began on june 10, 2005, with letters being mailed to peterbilt owners; and on june 17, 2005, for kenworth owners. Owners may contact peterbilt at 940-591-4201 or kenworth at 425-828-5440.
What owners say
Be the first 378 owner to share.
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 2005 Peterbilt 378 yet
No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.
Peterbilt 378: every year compared
All 378 years2005 Peterbilt 378 vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2005 Peterbilt 378 | 0 | 5 | D | |
| 2005 Peterbilt 379 | 7 | 6 | F | Compare |
| 2005 Peterbilt 387 | 2 | 4 | D | Compare |
| 2005 Peterbilt 335 | 1 | 1 | B | Compare |
| 2005 Peterbilt 386 | 1 | 4 | C | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2005 Peterbilt 378
Does the 2005 Peterbilt 378 have any recalls?
Yes - NHTSA lists 5 recalls for the 2005 Peterbilt 378: labels (November 2013); service brakes, air (February 2007); engine and engine cooling (December 2005); steering (November 2005) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 2005 Peterbilt 378 had?
None have been filed with NHTSA so far.
Is the 2005 Peterbilt 378 a reliable vehicle?
Its Safety Index is 32 out of 100 (grade D: more problems than a typical Peterbilt 378 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Peterbilt 378 years have the most complaints?
1996 (1), 2004 (1), 2006 (1). See every Peterbilt 378 year compared.
What should I do if my 2005 Peterbilt 378 has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data