- The problem
- Chrysler (FCA US, LLC) is recalling certain 2019-2020 Ram 3500, 4500, and 5500 cab chassis vehicles equipped with a Cummins 6.7L High Output engine. The engine calibration software may not warn about low oil volume.
- The risk
- Low oil can damage the engine, causing an oil leak or a punctured engine block, increasing the risk of a fire.
- The fix
- Dealers will update the engine calibration software, free of charge. Owner notification letters were mailed June 25, 2021. Owners may contact FCA US LLC customer service at 1-800-853-1403. FCA US LLC's number for this recall is Y21.
Engine & cooling
2020 Ram 3500 Engine problems
Owners have filed 30 complaints about the 2020 Ram 3500's engine & cooling with NHTSA - 26% of all its complaints, most recently on September 8, 2026. They describe 1 crash, 5 fires and 2 injuries. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 30
- Recalls
- 2
- Crashes
- 1
- Fires
- 5
- Injuries
- 2
- Deaths
- 0
Engine recalls for the 2020 Ram 3500
- The problem
- Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 3500, 4500 and 5500 cab chassis built with a Cummins 6.7L High Output engine. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while the engine is reaching operating temperature. This can result in engine damage and connecting rod failure, which could potentially puncture the engine block.
- The risk
- A damaged engine block may leak oil, which can contact hot engine or exhaust components, increasing the risk of a fire.
- The fix
- Chrysler will notify owners, and dealers will flash the engine calibration software to enhance the engine warm up protection, free of charge. The recall began September 10, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W57.
Engine complaints
While driving at highway speed a rod came through the engine block. I was fortunate I was able to coast to the shoulder of the highway before coming to a complete stop. I was towing a trailer. The engine gave no indication anything was wrong. The only notable thing was the lost of fuel mileage that begin to decrease earlier in the day. The ram engineering department is holding up the dealer from repairing the engine. They also have another there with a similar issue. They can't provide a timeframe on when the repair will be done. No rental or loaner vehicle is given. This is my work truck and no income while the truck is down.
The 2019 to 2020 model year ram 2500 heavy duty equipped with a 6.7L cummins diesel engine has a major safety issue that could cause a stall and increase the risk of a crash. The bosch cp4.2 Fuel injection pump has a very high rate of sudden failure leading to immediate stoppage on the engine and engine braking system. The pump destroys itself and takes out the rest of the entire fuel system leading to repairs in the $20,000 usd range. Fca & ram have attempted to revise the pump in late (july) 2020 to solve the...
Read the full complaint
issue but the failures keep occurring. For the 2021 model year, fca & ram have changed the pump entirely and reverted back to using an older, safer, more reliable design. No public announcements of neither the pump revision in 2020, nor the pump change in 2021 have been made. The issue is so prevalent that the replacement pumps and repairs generally have a 30-90 day wait period where the customer is without the primary vehicle. This problem is a substantiated safety risk. According to a texas judge in a bosch cp4.2 Lawsuit, when another automaker, gm tried to dismiss the case saying the pump failure is not a safety issue, the court responded: "the worst case scenario of a truck spontaneously stalling at high speeds is not a mere inconvenience. Nor is it a mere inconvenience to spend between $8,000 to $20,000 on repairs to make the trucks fit for their ordinary purpose. The court rejects gm's suggestion that the risk of spontaneous engine failure while driving is not, as a matter of law, unreasonably dangerous, depriving the vehicles of fitness for their purpose of transportation.". Toyota agrees: "if a vehicle stall occurs while driving at higher speeds, this could increase the risk of a crash". Fca & ram have remedied the situation for the 2021 model year however, the 2019 and 2020 owners are still at risk. The nhtsa needs to force fca to recall these trucks.
The 2019 to 2020 model year ram 2500 heavy duty equipped with a 6.7L cummins diesel engine has a safety issue that could cause a stall and increase the risk of a crash. The bosch cp4.2 Fuel injection pump has a very high rate of sudden failure leading to immediate stoppage on the engine and engine braking system.The pump destroys itself and takes out the rest of the entire fuel system leading to repairs in the $15,000-20,000 usd range. Fca & ram have attempted to revise the pump in late (july) 2020 to solve the...
Read the full complaint
issue but the failures keep occurring. For the 2021 model year, fca & ram have switched back the pump entirely and reverted back to using an older, safer, more reliable design cp3. No public announcements of neither the pump revision in 2020, nor the pump change in 2021 have been made. The issue is so prevalent that the replacement pumps and repairs generally have a 30-90 day wait period where the customer is without the primary vehicle. This problem is a substantiated safety risk. According to a texas judge in a bosch cp4.2 Lawsuit, when another automaker, gm tried to dismiss the case saying the pump failure is not a safety issue, the court responded: "the worst case scenario of a truck spontaneously stalling at high speeds is not a mere inconvenience. Nor is it a mere inconvenience to spend between $8,000 to $20,000 on repairs to make the trucks fit for their ordinary purpose. The court rejects gm's suggestion that the risk of spontaneous engine failure while driving is not, as a matter of law, unreasonably dangerous, depriving the vehicles of fitness for their purpose of transportation.". Toyota agrees: "if a vehicle stall occurs while driving at higher speeds, this could increase the risk of a crash". Fca & ram have remedied the situation for the 2021 model year however, the 2019 and 2020 owners are still at risk.
I bought my truck in tampa, fl in august with 23k miles truck has 30k now I was driving thanksgiving morning after filling tank off in a trusted gas station that I fill all my 3 trucks 2016, 2018, 2020 ram 3500. I drove about 35 miles and truck started to decelerate lost power within 2 miles and engine shut down and never started again I took to the arrigo dodge tamarac dealer and after 6 days the mechanic diagnosed that fuel has regular gas in it because they never has seen this to happened before. They said the...
Read the full complaint
only was fuel pump explode is that lacks of lubrication. They don't have a clue what are they saying I had my father in law ask the mechanic to give a sample of the diesel and after mechanic giving all bunch of excuses finally we got a sample. I have been resourcing and there are other truck with same problem in different states. Truck is under warranty and it seems to be that they are calling the wrong diagnose with no support documents.
Tl* the contact owns a 2020 ram 3500. The contact stated while driving 65 mph and towing a generator up a hill, the vehicle stalled with the diesel exhaust and engine stability control warning lights illuminated. The vehicle was not drivable. The vehicle towed to platinum chrysler dodge ram jeep located at 65 tx-557 spur, terrell, tx 75160, (469) 249-9407, where it was diagnosed with needing the fuel pump to be replaced. The vehicle was not yet repaired. The manufacturer had been informed of failure. The failure mileage was approximately 16,684.
Ram 3500 engine complaints by year
3500 engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data