Subaru of America, Inc. (Subaru) is recalling certain 2020 Outback and Legacy vehicles. The brake pedal mounting bracket may have a missing or insufficiently tightened bolt.
Brakes
Subaru Outback Brake problems by year
591 complaints filed with NHTSA about the Subaru Outback's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.
Brake complaints by model year
| Year | Brake complaints | Crashes | Injuries | Recalls |
|---|---|---|---|---|
| 2026 | 1 | 0 | 0 | 0 |
| 2025 | 7 | 1 | 0 | 0 |
| 2023 | 7 | 3 | 1 | 0 |
| 2022 | 11 | 2 | 0 | 0 |
| 2021 | 8 | 1 | 0 | 0 |
| 2020 | 15 | 4 | 0 | 1 |
| 2019 | 22 | 9 | 4 | 0 |
| 2018 | 18 | 7 | 3 | 0 |
| 2017 | 25 | 6 | 3 | 0 |
| 2016 | 18 | 7 | 3 | 0 |
| 2015 | 28 | 5 | 3 | 0 |
| 2014 | 22 | 1 | 0 | 1 |
| 2013 | 31 | 2 | 0 | 1 |
| 2012 | 40 | 3 | 1 | 2 |
| 2011 | 78 | 11 | 2 | 1 |
| 2010 | 40 | 2 | 0 | 1 |
| 2009 | 8 | 0 | 0 | 2 |
| 2008 | 31 | 2 | 0 | 2 |
| 2007 | 8 | 0 | 0 | 2 |
| 2006 | 19 | 1 | 1 | 2 |
| 2005 | 31 | 2 | 4 | 2 |
| 2004 | 3 | 2 | 0 | 0 |
| 2003 | 7 | 2 | 0 | 0 |
| 2002 | 30 | 5 | 4 | 1 |
| 2001 | 30 | 2 | 0 | 0 |
| 2000 | 12 | 5 | 2 | 0 |
| 1999 | 9 | 1 | 0 | 0 |
| 1998 | 14 | 2 | 1 | 0 |
| 1997 | 9 | 3 | 0 | 0 |
| 1996 | 7 | 3 | 2 | 0 |
| 1995 | 2 | 1 | 0 | 0 |
Brake recalls
Subaru of America, Inc. (Subaru) is recalling certain 2010-2014 Subaru Legacy and Outback vehicles equipped with a manual transmission. The electronic parking brake (EPB) may not engage as intended, allowing the vehicle to rollaway if the transmission is not...
Subaru of America, Inc. (Subaru) is recalling certain model year 2005-2009 Outback and Legacy, 2008-2011 Impreza and 2008-2014 Impreza WRX/STI, and 2009-2013 Forester vehicles, currently, or formerly, registered in Connecticut, Delaware, Illinois, Indiana...
Subaru is recalling certain model year 2005-2009 Outback and Legacy vehicles manufactured from December 2003, through April 2009 and currently, or formerly, registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts...
Subaru is recalling certain model year 2012 impreza sedans and wagons (except wrx/sti models), manufactured from april 21, 2011, through november 15, 2011, and legacy and outback vehicles manufactured from october 17, 2011, through november 23, 2011. These...
On certain passenger vehicles, the brake master cylinders may not function properly in ambient temperatures below freezing 32 degrees fahrenheit and lower).
Latest Outback brake complaints
Rear Automatic Braking (RAB) system conducted an emergency , neck snapping stop while backing out of a sloped driveway at 9PM local time, zip 94596, walnut creek, California. There was no vehicle traffic, pedestrian traffic or other movements nearby to trigger the RAB system. There was a local rescue ambulance parked on another intersecting street, well over 300 feet away, with emergency flashing lights. As the driver, I immediately checked for traffic, pedestrians, etc, found nothing; rolled down windows to...
Read the full complaint
check again, found nothing. The vehicle was still held by the RAB system, I applied pressure to the throttle and the car slowly started to backup and the brakes then released. I believe the RAB system responded to the flashing lights, categorizing it as a moving vehicle rather than as a stationary rotating beacon over 300 feet away. Subaru needs to adjust/modify/include in the software a better way to handle this type of warning lights into the RAB system.
The brake line junction box rusted through. This is a known issue with Subarus of this general era but the 2012 Outback is not on the recall list. Owner noticed brake fluid was getting low, after recently refilling the reservoir. Took the car to a shop and the brake light came on day of. The shop confirmed the brake line junction box was rusted through and leaking. Owner was advised that they were days away from a complete brake failure from a larger leak developing and brake pressure dropping catastrophically. As stated before this is a known issue Subaru recall campaign WQK-47. Looking online has revealed numerous Subaru owners experiencing the same problem.
Brand new 2026 Outback experienced a "Sudden Unintended Acceleration / Brake Ineffectiveness. This occurred 3 times this week after the car had been driven over 90 miles or over 90 minutes. Engine and components were warmed up. Car was initially reported to dealer 10/6, car was examined by dealer and returned to me later that day.could not be replicated. Car sat at my home until today when it was driven over 90 minutes or 90 miles. Replicated failure by me same as earlier in the week . Car drivetrain felt surged....
Read the full complaint
CVT fighting brake system when trying to turn car at street corner. Would not stop until on straight away ( seems to be triggered when turning and car was hot and when no power applied to engine. Only stops on straight away.. Could be related to cvt torque converter? Software glitch? Force of turning wheel?
The brakes failed and could be inspected upon request. My safety and the safety of two other passengers was put at risk because my vehicle rear ended an another vehicle at a red light. The problem has not yet been confirmed or reproduced by the dealership or inspected by the manufacturer, police, insurance representative of others. There were no warning messages, or symptoms of the problem prior to the failure.
Driving at speeds around 40 and when braking to turn, the brakes jerk and feel like they are not engaging properly. It has happened to a different driver, twice both times on a 90 degree day, a few minutes after the vehicle had been started and the air conditioner was running on high. After this happened we Googled the issue to see what the problem could be. The Google search shows a Subaru Service Bulletin #16-150-24R, 09/13/24, revised 12/03/24, showing our year and model of vehicle and a VIN # for all those...
Read the full complaint
models as TBD. The service bulletin list the exact problem that we had, and listed the AC running. The service bulletin list a fix of replacing the Transmission Control Module. This would be covered under 5 year 60K miles warranty for the Powertrain. Local Subaru dealer doesn't want to fix it because they can't replicate it by driving it. Subaru Customer Advocacy doesn't want to do anything because my VIN is not listed and they say the TSB are not for the customers to see. They refuse to let me talk with anyone further who would determine which VINs are going to be covered in this TSB.
The car accelerates on its own at times. I am not pressing the gas or going down a hill. It is flat road, sometimes even pulling into my driveway. There is also feeling like I am being bumped from the back and moving when I am idle. I am strict about oil changes and have it fully inspected when I take it every 3 months as I am a single mom and cannot afford for my children and I to be hurt in an accident or be without a car.
Brakes failed completely due to excessive rust / corrosion on brake line junction area. Brake pedal suddenly went to floor and fluid leaked out near right rear quarter of vehicle in-front of right rear tire.
My complaint/safety issue is that while I was in my 2019 Subaru Outback, I experienced Unintentional acceleration. While waiting for the large chain-link fence at my storage unit to open, the Outback raced into the gate! I had one foot on the brake waiting for the gate, then I stomped the pedal with both feet, and I held that position while the car smashed through the gate. This happened in July of 2021. I don't recall if I shut the car off or if it just finally came to a stop. I was terrified to drive it for...
Read the full complaint
fear of it happening again, but this time hitting a person in a crosswalk! I did take the car to Subaru, and they said that they would go through it thoroughly. After one month, they said that there were no issues with the car and that my carpet must have caused the acceleration. I reminded them that my car had floor mats that clicked into place! It was a nightmare. Even big wigs from Headquarters called me to explain this was a one-time thing and mentioned the floor mats again! I hope no more people are injured by the corrupt managers.
When depressing brakes in driveway pedal went to the floor and brake fluid went all over driveway and car struggled to stop. Upon inspection the junction in picture was heavily corroded and when brake line failed. Supposedly this vehicle was repaired in a former recall that obviously was not a fix.
On 6/22/2026 we were driving on the highway that had no objects in the road and one oncoming car about 200 to 300 yards away when our brakes locked up and a crash indicator popped up on the drivers screen. My wife and I were thrown violently forward into our seat belts it felt like we had been in a crash. I feel that if someone had been following us we would have been hit from behind. We immediately took the car to the dealer to be checked out. The next day they said they found nothing wrong with the car and gave it back. The car did have an update load earlier in the day.
On Monday [[redacted]] were driving on [[redacted]] going north up [[redacted]]. I was doing about 60-65 mph in traffic which was flowing in both directions. While ascending the pass, the car suddenly started to misfire, rapidly lost power, power steering failed and all dash lights lit up. With no shoulder to pull out this was a very scary experience. Eventually managed to limp to a spot where I could pull out off the pavement. Car was dead. Popping the hood showed significant battery corrosion. I had a...
Read the full complaint
toolkit with me. The voltmeter measured the battery voltage at 9.3V. Thinking maybe cleaning the battery terminals would allow the car to be restarted, I managed to get the cables off and cleaned everything with a wire brush. But still no power. After a while a state trooper passed by and hung on while I contacted a towing service. After another 1.5 hours, the tow truck arrived and towed the car the 60 miles or so to the dealership in Denver with my wife and I in the cab of the tow truck. Dealer repair invoice indicated Data Control Module (DCM) "causing excessive draw on electrical system." More significantly, the battery had drained below the the operating threshold voltage required for vehicle drivability (understood to be 10-10.5V). There was no mention of this by the dealer service adviser. Although dealer diagnostic was carried out, no computer codes were provided. Vehicle mileage at time of incident 73,456. I have owned the car since new and have all service records. Car was repaired and picked up from dealership on 06/10/26 with a replacement DCM. Battery was charged up but not replaced and left in corroded state. Battery will probably have been weakened by such a total discharge with reduced life expectancy. I have uploaded the dealer repair invoice. I have reported this incident to Subaru of America. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
On June 15th 2026, I was at a red light and the Auto Start-Stop feature shut off the engine. When light turned green, my car lost power and started rolling downhill. During this rolling downhill, the brakes stopped working, I was unable to engage parking brake, and I wasn't able to do anything except find a place to safely use gravity to slow the vehicle down. If the hill was steeper, this scenario could have been deadly. It was so scary, I called 911 for assistance but got lucky I was able to stop the car before...
Read the full complaint
there was an accident. It turns out the battery didn't have enough power to allow the vehicle to restart and if this happens when the Auto Start-Stop feature is engage you lose the ability to use the brakes. I spoke to the local dealership and acknowledge that is a problem.
Report on Accident [[redacted]] 4TH DISTRICT wHEATON MARYLAND [[redacted]] [[redacted]] I was driving west on [[redacted]] at approximately [[redacted]]. As I approached the intersection at [[redacted]] the TRAFIC light cars were stopped . I was in the left hand lane because I was going to turn on to [[redacted]] . As approached the intersection I applied the brakes the pedal went close to the floor but the car did not slow down. I tried pumping the brake pedal with no effect. No collosion avoidance...
Read the full complaint
alert To try and slow the vehicle ran the wheel against the curb of the median which slowed the car down a little . I pressed the parking brake button with no effect. The collision avoidance system did not engage. I clipped the rear of the Toyota Corolla as I jumped the curb to avoid cars using the friction against the curb and move further left when oncoming cars were clear and was able to stop the car. (The car may have stopped because the front control arm bent which made the car drag. ) I am unsure whether the master cylinder failure or ABS overrode braking, but the car would not stop. I do not know if the black box captured the data as the there was no airbag deployment. The collision avoidance system did not engage to slow the car any time. I did not see any lights light on the dashboard did not check specifically as I was busy avoiding a collision other cars . Basically, pedal went down not all the way to the floor but car was not slowing down. I checked the master cylinder reservoir, and it still had fluid. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
On 05/08/2026 the brakes failed while in a queue at a drive-up restaurant. The car was steered away to a flat part of the parking lot. After a restart the brakes returned to operation and the car was taken to the dealership where the brake line were flushed and the brake fluid replaced. On 05/25/2026 the brakes failed after backing out of an inclined parking space in a parking garage. The car came to a stop when it backed into a concrete wall. The car was towed to the dealer. The dealer inspected inspected the car and reported that the brakes were working as they should.
The contact owns a 2025 Subaru Outback. The contact stated while driving at an undisclosed speed, the wheels skidded and the steering wheel seized. In addition, the contact stated that the engine seized. No warning lights were illuminated. The contact stated that while attempting to start the vehicle, the vehicle started. The contact stated that the vehicles behind the contact's vehicle had to drive around the contact's vehicle. The vehicle was driven to the contact's residence. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 16,000.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data