- The problem
- Tesla Motors, Inc. (Tesla) is recalling certain model year 2013 Model S vehicles equipped for, and delivered with, certain NEMA 14-50 (240 volt) Universal Mobile Connector (UMC) adapters. During charging, the adapter, cord, or wall outlet could overheat.
- The risk
- An overheated adapter, cord, or wall outlet increases the risk of burn injury and/or fire.
- The fix
- Tesla will notify owners and provide an over-the-air (OTA) software update. Some owners have already received this update. This update allows the Model S on board charging system to detect any unexpected fluctuations in the input power or higher resistance connections to the vehicle. If detected, the onboard charging system will automatically reduce the charging current by 25%. Tesla owners can verify that they have received the updated software (version 5.8.4 or later) by viewing the vehicle's center information screen. Additionally, Tesla will mail owners a replacement NEMA 14-50 adapter that is equipped with an internal thermal fuse. The recall began on March 14, 2014. Owners may contact Tesla Service Center at 1-877-79-TESLA (1-877-798-3752).
Equipment & accessories
2013 Tesla Model S Equipment problems
Owners have filed 4 complaints about the 2013 Tesla Model S's equipment & accessories with NHTSA - 1% of all its complaints, most recently on June 22, 2022. They describe 0 crashes, 1 fire and 0 injuries. Trailer hitches, mobility equipment, accessories and aftermarket parts.
- Complaints
- 4
- Recalls
- 1
- Crashes
- 0
- Fires
- 1
- Injuries
- 0
- Deaths
- 0
Equipment recalls for the 2013 Tesla Model S
Equipment complaints
The contact owns a 2013 Tesla Model S. The contact stated upon attempting to remove the charger from the vehicle charging port, the charger remained plugged in. The manufacturer was notified of the failure and sent a certified technician who assisted in releasing the charger. The certified technician diagnosed that the charging port and the charger cord had melted and needed to be replaced. The manufacturer informed the contact that he would be responsible for the cost of repair. The contact became aware of NHTSA Campaign Number: 14V006000 (Equipment). The vehicle was not repaired. The failure mileage was approximately 120,350.
Tl* the contact owns a 2013 tesla model s. The contact stated while driving 20 mph, the media control unit and the dashboard lights flickered on and off before becoming inoperable. There was no warning light illuminated. The contact drove to the residence. The next day the contact drove the vehicle to tesla (811 s san fernando blvd, burbank, ca 91502) who diagnosed the failure to the media control unit. The failure mileage was 41,000.*Dt the failure of the media control unit has occurred many times before the...
Read the full complaint
contact made this report. The above represents the latest occasion of incident. Some of the media control unit failures occurred while driving on a highway at speeds of 65 miles per hour. When contact took his vehicle to tesla, the service center stated that the media control unit needed replacement, but wanted estimated $1,400.00 For the replacement. The media control unit was not replaced due to high cost. The media control unit failure occurred again in early january 2021, after this report was originally submitted.*Dt*jb
Despite the 14v006000 recall being issued about a month ago, customers are complaining that they have not received a recall notification, so they have been unaware of the fire hazards and only found out about it online after their charge connectors failed after the recall. Allegedly on january 9, 2014 tesla ceo elon musk claimed that related recalled tesla model s. Adapters would be mailed out within two weeks. Yet a month later customers and allegedly even tesla service centers have not received the replacement...
Read the full complaint
adapters. The proposed recall as it stands seems to be insufficient because the only hardware that is replaced is the adapter. The connections between the adapter and the umc module are well documented to be the source of many overheating, melting and burning events. These connections should probably be replaced with connectors that are better capable of carrying the high current for long durations. Despite tesla trying to portray a software update as a "fix", tesla charge connectors continue to overheat, melt and burn. Despite tesla trying to scapegoat house wiring and wall outlets as the problem. There has been and continues to be occurrences of tesla charge connections overheating, melting and burning that house wiring and wall outlets are not the source. There is no doubt that house wiring and wall outlets have been and will be a cause and or factor in some cases, however that should not divert attention away from the faulty tesla charge connections that are a fire hazard. *Tr
An individual claims that when he charges at a lower rate, that if the new software detects a problem it increases the charge rate rather than reducing it. If it is true, under some circumstances the update can increase the chance of an overload and fire. It seems in some cases that the tesla safety software update safety "fix" may be creating fire hazards. There may be a glitch, bad programming in the tesla software update. Part of the nhtsa campaign number: 14v006000 recall, has a software update that by an...
Read the full complaint
allegation might increase current when the software detects a problem when it is charging at a lower charge rate. Allegedly in some cases the tesla charger will charge faster than it is set. *Tr
Tesla Model S equipment complaints by year
Model S equipment problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data