- The problem
- Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The ball joint housing may have inadequate hardness, causing premature failure.
- The risk
- A ball joint failure may cause a loss of control, increasing the risk of a crash.
- The fix
- DRiV will work with distributors to return unsold parts. Dealers will inspect and replace the ball joint as necessary, free of charge. Owner notification letters were mailed on March 17, 2022. Owners may contact DRiV customer service at 1-877-489-6659 or at [email protected].
Vehicle safety record
2005 Toyota Sequoia Problems, complaints & recalls
Owners have filed 352 complaints about the 2005 Toyota Sequoia with NHTSA, most often about the driver assistance (94) and the brakes (91). Those complaints describe 7 crashes, 1 fire, 21 injuries and 2 deaths. It is covered by 11 recalls, the latest in January 2022 for the lower ball joint. For comparison, the 2004 has 380 and the 2006 has 0.
NHTSA data checked
FFar more problems than a typical Sequoia year, for its age
#43 most complained-about 2005 vehicle
- Complaints
- 352
- Recalls
- 11
- Crashes
- 7
- Fires
- 1
- Injuries
- 21
- Deaths
- 2
Most common 2005 Toyota Sequoia problems
Share of all 352 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2005 Toyota Sequoia recalls 11
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
- The risk
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
- The fix
- Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.
- The problem
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.
- The risk
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
- The fix
- Toyota will notify the Toyota and Lexus owners. General Motors will notify the Pontiac Vibe owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator with an alternate inflator, or replace the air bag assembly that includes an alternate inflator, free of charge. The recall began January 23, 2019. Owners may contact Toyota customer service at 1-888-270-9371, Lexus customer service at 1-800-255-3987 or Pontiac customer service at 1-800-762-2737. Toyota's numbers for these recalls are J0A (Zone A Toyota), J0B (Zone B Toyota), J0C (Zone C Toyota), JLI (Zone A Lexus), JLJ (Zone B Lexus), and JLK (Zone C Lexus). Note: This recall includes vehicles that have had their air bag previously replaced under an earlier air bag campaign.
- The problem
- Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
- The risk
- If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
- The fix
- SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
- The problem
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2003-2006 Toyota Land Cruiser and Lexus LX470, 2005-2006 Toyota Tundra and Sequoia, 2004-2006 Toyota 4Runner and Lexus GX470 vehicles equipped with side curtain-shield-air bags. The affected vehicles have an air bag control module that may be improperly programmed, causing the side curtain-shield-air bags to deploy inadvertently.
- The risk
- If the side curtain-shield-air bags deploy unexpectedly, it can increase the risk of occupant injury.
- The fix
- Toyota will notify owners, and dealers will replace the air bag control module with one that has improved programming, free of charge. The recall began on December 1, 2016. Owners may contact Toyota customer service at 1-888-271-9371. Toyota's number for this recall is G0C and GLB.
- The problem
- Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015, that they are recalling 2005-2007 Lexus SC, Toyota Corolla, Corolla Matrix, Sequoia, and Pontiac Vibe, and 2005-2006 Toyota Tundra vehicles that were originally sold, or ever registered, in Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. On June 16, 2015 Toyota expanded the recall to cover an additional 769,055 vehicles, including certain model year 2002-2004 Lexus SC, Toyota Sequoia, 2003-2004 Toyota Corolla Matrix, Toyota Corolla, Pontiac Vibe, and Toyota Tundra vehicles, as well the vehicles covered by the May 13, 2015 notification in the portions of Georgia, Alabama, Louisiana, Mississippi and Texas that were not previously included. The inflators in the front passenger air bags are susceptible to rupture in the event of a crash necessitating the deployment of the front passenger air bag.
- The risk
- In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
- The fix
- 2003-2004 Corolla and Corolla Matrix vehicles that are recalled under both 15V-043 and 15V-286 are under a Do Not Drive advisory. Owners of these vehicles are advised not to drive their vehicles until the recall remedy has been completed. Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the passenger side front air bag, free of charge. Owners may contact Toyota customer service at 1-800-331-4331. Toyota began the recall on July 13, 2015. Pontiac Vibe owners may contact GM at 1-800-762-2737. GM began the recall on June 29, 2015. NOTE: This recacll supersedes recall 14V-655 in its entirety. For vehicles located in the U.S. states not listed above, please see Toyota recall 15V-285 which covers all other U.S. states.
- The problem
- Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional 1,270,468 vehicles, including model year 2002-2003 and 2005-2007 Sequoia, 2005-2006 Tundra, 2003-2007 Corolla, 2003-2007 Corolla Matrix, 2003-2007 Pontiac Vibe and 2002-2007 Lexus SC vehicles. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
- The risk
- In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
- The fix
- 2003-2004 Corolla and Corolla Matrix vehicles that are recalled under both 15V-043 and 15V-285 are under a Do Not Drive advisory. Owners of these vehicles are advised not to drive their vehicles until the recall remedy has been completed. Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the front passenger air bag. The recall began on July 13, 2015. Toyota owners may contact Toyota customer service at 1-800-331-4331. Pontiac owners may call 1-800-762-2737. NOTE: This recall supersedes recall 14V-312 in its entirety.
- The problem
- Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
- The risk
- Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
- The fix
- SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
- The problem
- Southeast toyota is recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "Tire selection and rims." These vehicles were sold without the requisite load carrying capacity modification labels.
- The risk
- A driver may overload a vehicle which may increase the risk of a crash.
- The fix
- Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. The safety recall began on may 27, 2010. Owners may contact southeast toyota at 1-800-301-6859.
- The problem
- Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. The seal on master cylinder can fail and leak brake fluid.
- The risk
- Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.
- The fix
- Cardone will notify owners and offer to repurchase any defective master cylinders. The recall began during april 2007. Owners can contact cardone at 1-800-777-4780.
- The problem
- On certain trucks and mini vans, due to possible improper finishing of the front suspension lower ball joint, some ball joints may experience an incidental deterioration of the internal lubrication. This may cause the ball joint to wear and loosen prematurely, which could result in increased steering effort, reduced vehicle self-centering, and noise in the front suspension.
- The risk
- In extreme cases, if the vehicle is continuously operated in this condition, the lower ball joint may separate from the knuckle and could cause a loss of vehicle control.
- The fix
- Dealers will replace the front suspension lower ball joints. The recall began on february 28, 2007. Owners may contact toyota at 1-800-331-4331.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
352 complaints about the 2005 Toyota Sequoia
Newest first, as filed with NHTSA by owners. Page 1 of 15.
Starter replacement is exceptionally high, self repair impossible. There should be recall on manufacturing design of starter placement inside intake manifold amongst other impossible expectations
We have an issue with our Cosco Mightyfit LX Convertible Car Seat that we purchased in 2021 from Walmart. About 5 times now, when we have gone to get our child out of the seat, one of the straps has disconnected by itself from the rear buckle loop holder. The first time it happened we thought it may be a fluke, but given it has happened now about 5 times we are concerned about the continued use of this car seat and the safety it would provide in the case of a crash. We are concerned that if involved in a crash, one...
Read the full complaint
side (or both) of the chest straps would somehow come undone and our child would not be secured in his seat. Once we re-connect the strap to the buckle/loop on the back side of the car seat, it seems to be okay again for a little bit, but there is no notice or appearance of issues until some time later we go to unbuckle him and realize one strap just pulls out of the back of the seat. Additionally, the issue seems to occur regardless of installation method. It has occurred with both the latch system and the vehicle's seat belt. Issue seems to be regardless of seat installation location as we have had it happen in both the 2nd and 3rd rows. Vehicle seems to not play a factor as well. To answer the suggested questions very specifically: -What component or system failed or malfunctioned, and is it available for inspection upon request? The harness. Specifically, part of the 5-point harness that is the shoulder strap (left side usually) -How was the child's safety put at risk? Child would not be secure in instance of crash and liable to come out of their car seat or not remain as firmly planted as designed. -Has the car seat been inspected by the manufacturer, police, insurance representatives or others? No it has not. The date listed below of when incident occurred is the most recent date this occurred, but again it has been multiple times now.
After several years of fighting problems with, after braking to a brief stop, the loss of power/abs grinding when accelerating and turning right, now the ABS is completely dysfunctional. Both TRC lights will turn on and usually the parking brake, and when braking at speeds less than 10mph the abs will activate and prevent bring the truck to a stop without pumping them, on dry pavement. When the ABS light turns on, then braking is possible, but all pressure is gone from brake booster and brakes sound like they're...
Read the full complaint
grinding, not like the sound of abs engaging. Very dangerous to drive in snow as front brakes work but drive axle doesn't disengage when the brake pedal is depressed. Regular mechanic won't engage with diagnosing issues as he feels the problem is partly computer malfunction and Toyota won't allow for used part mismatching. ABS/ECU is failed.
The contact owned a 2005 Toyota Sequoia. The contact stated that the vehicle had been taken to the dealer on August 7th, 2023, where a protective chemical coating was sprayed on the sub frame. The contact stated that after driving, he noticed that power steering fluid was leaking from the vehicle. There were no warning lights illuminated. The contact's brother who is an independent mechanic, informed him about the source of the leak and noticed there was rust on the puncher frame. The vehicle was towed to the same...
Read the full complaint
local dealer, where it was placed on the lift, and it was diagnosed that the frame had rusted and was damaged beyond repair. The mechanic was able to peel and remove rust while using a screwdriver. The manufacturer was not contacted. The failure mileage was approximately 198,000.
Took the suv for an oil change and was brought to my attention that the frame of suv, chassis, is rusted and can break any moment. I took it to Toyota 2 years ago for the recall, and they said it was fine.
The contact owns a 2005 Toyota Sequoia. The contact stated while driving 60 MPH the rear of the vehicle lowered and the rear of the vehicle started to bounce, and the suspension warning light illuminated. The vehicle was taken to the dealer and the dealer stated that the suspension system needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 100,000. The VIN was not available.
The frame is damage by the weather.
2005 Sequoia class action, court ordered frame inspection & either repair or frame replacement. Never received notice of class action. Received letter stating vehicle needed to be inspected. Took to Victory Toyota, Canton, MI on Jan 5, 2018. Was told passed inspection & frame needed seal coating, did not have product. Vehicle was taken in multiple times, never completed the process. On May 6, 2019 the vehicle was taken to this dealership, a rental vehicle was provided and they did nothing and on May 21, 2019, noted...
Read the full complaint
the vehicle didn't pass inspection & the campaign had expired! Per service history report from another dealership, on May 21, (the 15th day they had they had vehicle in their possession), they noted the frame did not pass inspection, also noted the repair timeline expired and they did nothing; however, they were paid to do the job they never did. The frame should of been replaced. I have photos from 2016 showing holes in the frame. I took vehicle to two other dealerships, one inspected in fall 2019 & sent 3 photos to Toyota showing the frame rusted holes but stated once Toyota makes a decision, the never change their mind. Second local dealership printed detailed Toyota repair history report showing Victory stated the vehicle did not pass inspection and that the timeline expired on the 16th day they had the vehicle!! The vehicle interior & exterior is in excellent condition but Toyota knowing refused to replace many of the frames, even though they knew the manufacturer had not made the frames correctly. Toyota has tons of money, clearly they don't care about their product or customers safety.
Frame deterioration has rendered the rear torque arm incapable resulting in dynamic misalignment of the rear axle. Under acceleration the vehicle veers into oncoming traffic and under deceleration it veers towards the road ditch as the axle shifts about beneath the vehicle.
I tried to make apointments to local dealers they set up appointments and than don't do nothing about it they said the don't have any certified tech to do the job so I left with this mess not knowing when my ride is going to give. Out on me I got about 319000 miles Toyota should be proud and thank me for keeping my ride up to date I do my part to have it running good but they not doing there part to help me with these recalls please help me out.
Malfunction indicator lights - Check engine, VSC off and TRAC off. The vehicle goes into limp mode. The issue is both a mechanical and engineering defect causing the override of the entire AIP system. Parts affected are Air injection pumps, Air switching valves, Air pump inlets/covers, Gaskets/connectors/clamps and Speed sensors.
Frame Rust
In october of 2020, I scheduled an appointment for my airbag recalls at my local toyota dealer (lia toyota of colonie). My appointment was on october 22, 2020. After devoting a day to this, I was dismayed to learn that my vehicle could not be repaired because the parts were backordered. They said they would let me know when the parts were in. Several weeks went by, and I heard nothing. Then, I get a cryptic message from someone in their parts department, and gave me a number to call back. When I called the number,...
Read the full complaint
a man answered who said it was not lia toyota, and that he'd been getting a lot of calls from people thinking they were calling lia toyota. (The dealership did pick up when I called the number, and it was when I entered the choice to speak with the service department that the phone system then transferred me to some individual's mobile phone!) So, I then had to try a different route to contact the dealership and find out what was happening. This led to several calls where no one really knew what was happening. I finally got my original service manager to research the situation, and he said the parts were still on back order. Fast forward to december 15, 2020, and I texted their service department who informed me that 1 part was in, but another was still backordered. I then texted them today (jan 29) and they said the parts were now in. So I am fairly certain that no one was ever going to follow up with me to notify me of this. It's been 3.5 Months, and customers' safety does not seem important to either toyota or lia toyota of colonie. I own several businesses, and customers' valuable time does not seem important to them either. I shouldn't have to work this hard to get a recall repair done.
These vehicles have a well known frame rust issue. In march of 2018, toyota deemed this frame safe after an inspection and applied an undercoating to cover up the rust. A year later the undercoating began to flake off, revealing the severe rust underneath. Last week, not even three years later, we were making a right turn and felt a pop underneath. The passenger side sway bar mount broke loose from the frame, and the toyota dealership told us the frame is so rotted there's nothing left to weld it back to. Other...
Read the full complaint
than the frame rot, the vehicle runs, looks, and drives like new. This frame, as well as many others, should have been replaced instead of undercoated. The class action lawsuit and service campaign are over, but I think this should be revisited, as there are still many instances of this happening.
Tl* the contact owns a 2005 toyota sequoia. The contact stated that the rear driver's side frame corroded and the suspension arms that holds the frame springs were also corroded. The contact became aware of the failure while driving approximately 30 mph, when the contact heard an abnormally loud sound. The contact drove the vehicle home. The vehicle was not taken to a dealer for inspection. The manufacturer informed the contact that the warranty had expired for the corrosion repair. The vehicle was not repaired. The failure mileage was 240,000.
Label for dot compliant vehicle is not on the driver side door of the vehicle. Trying to import vehicle into the us from mx
On 1/31/20 I took possession of 2005 toyota sequoia, vin [[redacted]] and on 2/3/20 I registered the vehicle in the state of massachusetts. The previous owner [[redacted]] had originally purchased the vehicle on november 27, 2007 with 48,836 miles. [[redacted]]. Told me that toyota had inspected the frame and coated it. On 2/4/20 I visited toyota of dartmouth in north dartmouth, ma 02747 for set up an appointment to have two air bag recalls addressed. Upon their review of the vehicle's toyota service record...
Read the full complaint
they informed me that no record regarding the frame or frame coating exists. On 2/11/20 toyota dartmouth took the vehicle in for the two air bag recalls and during that time I had asked for an opinion of the frame. They completed the air bag recalls and told me that they were unable to lift the vehicle. Severe rot holes on the driver side rear of frame where drag link connects to frame. Vehicle is unsafe.? They recommended I call toyota because the frame program had expired but said that toyota might be able to help. I called toyota that afternoon and was told a customer experience agent would call me back the following day. On 2/12/20 a toyota agent called me and explained that because the frame program had expired in january 2019 that there was nothing that toyota could do. I asked to speak with someone higher up who could review the case. I was connected with [[redacted]], operations supervisor of customer experience at the toyota headquarters in plano, tx. [[redacted]] also explained that because the frame inspection/replacement program for my vehicle had expired that there was nothing toyota could do. I requested that he elevate the case higher to someone who could review the case on a stand alone basis. [[redacted]] told me that he was the highest this could go and that there would be no further action by toyota for this case # [[redacted]]. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
AIRBAG RECALL
Brake, vsc trac, trac off, and abs lights all come on intermittently while driving and stay on until the car is turned off and restarted. Seems to be a very common problem according to the forums.
Tl* the contact owns a 2005 toyota sequoia. While driving approximately 60-65 mph, the brake pedal was depressed and traveled to the floorboard. The brakes failed to slow down the vehicle. The contact was able to use the parking brake to stop the vehicle. The vehicle was towed to an independent mechanic who diagnosed that the brake booster failed and needed to be replaced. The vehicle was not repaired because the part was no longer being manufactured. Hutchinson toyota of albany (located at 2865 ledo rd, albany, ga 31707, (229) 436-7751) was contacted by phone and informed of the failure. The manufacturer was notified of the failure. The approximate failure mileage was 242,000.
When backing up or sometimes slowing down moving forward the vcs lights all come on and the brakes automatically engage (quickly and with a grinding sound) and the car moves to the right and stops abruptly.
The recall warranty expired on this vehicle on january 31, 2017. I first received notice of this defect when I took my vehicle to the dealership for another issue I was experiencing. The dealership notified me that the recall was for rusting of the vehicle's chassis and is dangerous for me to continue driving my vehicle. I usually receive notices, as I did for the airbag recall, however, I never received any notice with regard to the recall for the vehicle chassis. I have kept the same address for the past 20...
Read the full complaint
years. I attempted to call toyota and toyota told me I should have visually noticed the defect. The defect is the rust underneath my car, which is not open and obvious. This was also admitted by the agent/supervisor. Toyota failed to even offer 50% coverage on this recall. How can a car company allow its customers to continue driving a vehicle with such a dangerous defect that I never received notice of.
One morning around 11/20/2018, I noticed my window shield was cracked in the upper right hand side. Passengers side. It also developed strange noises, rattling, in the dashboard. I had had the evaporator replaced, so I took it back to the mechanic to check the noise out. He advised that after inspection he noticed the windshield was cracked and loose. It had nothing to do with the evaporator installation. So I now have a cracked and loose windshield, with no accident or crash, no rock hit my winshield. So I suspect it was a badly installed windshiel. I noticed this winshield one morning while still in the driveway.
Engine knocking sound or tickling noise.I went to the dealer to diagnosis what is wrong, but they cannot figure out. The dealership recommended to replace the whole engine quoting $9,800 for parts and labor. The vehicle has only 52,000 miles on it, it should not be having this problem. The car is not worth that much, as I would be spending on it. Looking online there are others with the same problem and some have said toyota has replaced their engine. I contacted the executive office and they denied any...
Read the full complaint
assistance, seems like they do not want to stand behind their customers when problems arise until it becomes a bigger issue. I am just letting you guys know of this problem, I am not sure if you can do anything, but I want to involve media and others with this problem. It is not fair to spend so much money on a car just for the engine to go out at 52,000 miles. There has to be some kind of manufacure defect.
Tl* the contact owns a 2005 toyota sequoia. While driving 65 mph with the brake pedal depressed, the vehicle failed to slow down and an unknown warning indicator illuminated. The contact stated that the failure occurred multiple times. The brake pedal was depressed as if the skid control was activated. The manufacturer was made aware of the failure. The dealer was not contacted. The failure mileage was 128,735. *Tt *tr
Toyota Sequoia: every year compared
| Year | Complaints | Recalls | Grade |
|---|---|---|---|
| 2009 | 6 | 9 | D |
| 2008 | 67 | 9 | F |
| 2007 | 136 | 9 | F |
| 2006 | 0 | 10 | D |
| 2005 | 352 | 11 | F |
| 2004 | 380 | 9 | F |
| 2003 | 684 | 7 | F |
| 2002 | 692 | 8 | F |
| 2001 | 530 | 3 | F |
2005 Toyota Sequoia vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2005 Toyota Sequoia | 352 | 11 | F | |
| 2005 Nissan Armada | 373 | 5 | F | Compare |
| 2005 Cadillac Escalade | 62 | 4 | C | Compare |
| 2005 Lincoln Navigator | 48 | 0 | C | Compare |
| 2005 Toyota Land Cruiser | 0 | 3 | C | Compare |
| 2005 Chevrolet Tahoe | 0 | 7 | D | Compare |
| 2005 Chevrolet Suburban | 0 | 7 | D | Compare |
| 2005 GMC Yukon | 0 | 5 | C | Compare |
| 2005 GMC Yukon XL | 0 | 6 | D | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2005 Toyota Sequoia
Does the 2005 Toyota Sequoia have any recalls?
Yes - NHTSA lists 11 recalls for the 2005 Toyota Sequoia: lower ball joint (January 2022); inflator module (October 2019); inflator module (December 2018); seat heater / cooler (June 2016) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2005 Toyota Sequoia?
By the complaints owners filed with NHTSA, the most common problem areas are the driver assistance (94), brakes (91), acceleration & cruise control (85).
How many complaints has the 2005 Toyota Sequoia had?
352 complaints have been filed with NHTSA, the first on January 11, 2005 and the latest on August 21, 2024. Of these, 7 describe a crash and 1 a fire, and together they report 21 injuries and 2 deaths.
Is the 2005 Toyota Sequoia a reliable vehicle?
Its Safety Index is 1 out of 100 (grade F: far more problems than a typical Toyota Sequoia year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Toyota Sequoia years have the most complaints?
2002 (692), 2003 (684), 2001 (530). See every Toyota Sequoia year compared.
What should I do if my 2005 Toyota Sequoia has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data