Vehicle description: class 8 heavy duty trucks. The air suspension control valve supply line was not plumbed through an air pressure protection valve. In the event of a failure, there would be loss of air pressure in the 'b' system air reservoir that...
Manufacturer safety record
White GMC Problems, complaints & recalls
NHTSA holds 8 owner complaints and 28 recalls for White GMC vehicles from 1986 to 2001. The most complained-about model is the White GMC (4 complaints).
- Complaints
- 8
- Recalls
- 28
- Crashes
- 1
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
White GMC models
| Model | Years | Complaints | Recalls |
|---|---|---|---|
| Wca | 1986-1998 | 3 | 10 |
| Acl | 1986-1998 | 0 | 10 |
| WG | 1986-1998 | 0 | 10 |
| WX | 1986-1998 | 0 | 10 |
| Wia | 1986-1998 | 0 | 9 |
| WCM | 1986-1998 | 0 | 8 |
| Wim | 1986-1998 | 0 | 7 |
| Wxll | 1988-1998 | 0 | 7 |
| Wah | 1993-1998 | 0 | 6 |
| WHR | 1988-1996 | 0 | 5 |
| FE | 1992-1998 | 0 | 4 |
| WCS | 1986-1989 | 0 | 4 |
| WHL | 1986-1995 | 0 | 4 |
| White GMC | 1988-1997 | 4 | 3 |
| WCL | 1986-1990 | 0 | 3 |
| Wil | 1986-1989 | 0 | 3 |
| Acm | 1986-1991 | 0 | 2 |
| WGL | 1988-1993 | 0 | 2 |
| WH | 1991-1992 | 0 | 2 |
| WHM | 1986-1988 | 0 | 2 |
| WXR | 1993-1995 | 0 | 2 |
| Aclf | 1993-1995 | 0 | 1 |
| Aclff | 1993-1995 | 0 | 1 |
| Aclft | 1993-1995 | 0 | 1 |
| NE | 1994-1995 | 0 | 1 |
| WB | 1988 | 0 | 1 |
| Wcmg | 1988-1990 | 0 | 1 |
| WHC | 1993-1995 | 0 | 1 |
| Aero | 2001 | 1 | 0 |
All time
Most complained-about White GMC vehicles
| # | Vehicle | Complaints | Recalls | Grade |
|---|---|---|---|---|
| 1 | 1994 White GMC Wca | 2 | 4 | F |
| 2 | 1995 White GMC White GMC | 1 | 1 | D |
| 3 | 1997 White GMC White GMC | 1 | 0 | A |
| 4 | 2001 White GMC Aero | 1 | 0 | - |
| 5 | 1989 White GMC White GMC | 1 | 0 | A |
| 6 | 1993 White GMC Wca | 1 | 3 | D |
| 7 | 1993 White GMC White GMC | 1 | 0 | C |
Latest White GMC recalls
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. These shafts can fracture inside the beam at the toe of the weld.
The traction solenoid exhaust can be obstructed due to inadequate drainage and a build-up of road contamination between the mounting bracket and the solenoid housing. The obstructed exhaust prevents the relay valve control air pressure from venting after a...
The rear suspension axle retention plate can break under normal use, affecting axle alignment.
The tilt cab, when raised to its fullest up position, can cause the steering shaft to bind against the steering gear.
Undercoating applied to the inside of the cab shell squeezed out during assembly onto the brake pedal plunger.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data