- The problem
- Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
- The risk
- Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.
- The fix
- Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.
Vehicle safety record
2011 Winnebago Journey Problems, complaints & recalls
Owners have filed 2 complaints about the 2011 Winnebago Journey with NHTSA, most often about the electrical system (2) and the body, doors & structure (1). It is covered by 3 recalls, the latest in December 2012 for the electrical system. For comparison, the 2010 has 2 and the 2012 has 1.
NHTSA data checked
CAbout as many problems as a typical Journey year, for its age
#281 most complained-about 2011 vehicle
- Complaints
- 2
- Recalls
- 3
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Most common 2011 Winnebago Journey problems
Share of all 2 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2011 Winnebago Journey recalls 3
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Winnebago is recalling certain model year 2011 journey, meridian, tour, ellipse motor homes and winnebago commercial vehicles built on mc, xcl, and xcs chassis from september 1, 2010, through december 31, 2010, and equipped with a cummins isx or isl diesel engine. The v-band clamp assembly, part numbers q187684, q187685, and q187686, used to connect the inlet and outlet cone sections to the diesel oxidation catalyst (doc)/diesel particulate filter (dpf) include a t-bolt which can fracture and fail when subjected to stress or load. A fracture or failure of the t-bolt may cause the clamp to loosen and the inlet or outlet sections attached to the doc/dpf housing to disconnect.
- The risk
- If the inlet or outlet sections disconnect, hot exhaust gases can vent prior to exiting the tailpipe, creating the risk of combustion and a fire. If both clamps fail, there is a risk in some applications that the doc/dpf housing may detach completely, creating a road hazard.
- The fix
- Winnebago is working with daimler trucks north america (the supplier of the chassis) and cummins to identify and notify owners of the recall campaign. The manufacturer has not yet provided the agency with a remedy plan for this campaign. The safety recall began october 10, 2011. Owners may contact cummins at 1-812-377-5000.
- The problem
- Winnebago is recalling certain recreational vehicles equipped with 1200-series norcold refrigerators. The population of refrigerators being addressed contains either a sensing algorithm or thermal switch to shut off power to the refrigerator when high temperatures are detected in order to prevent a potential fire. The response times of the sensor algorithm and thermal switch devices to stop power are not sufficient.
- The risk
- The sensing algorithm or thermal switch installed to shut off power to the refrigerator when high temperatures are detected due to a possible hydrogen gas leak may not shut off in sufficient time to prevent a fire.
- The fix
- Winnebago is working with norcold to identify and notify any affected owners. Owners will be instructed to contact norcold dealers to receive the remedy free of charge. Please see norcold's defect report 10e-049 for additional information. The recall began during december 2010. Owners may contact norcold at 1-800-767-9101 or winnebago at 1-641-585-3535.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
2 complaints about the 2011 Winnebago Journey
Newest first, as filed with NHTSA by owners.
Rv slideouts often have passenger seating. On certain models of power gear slide systems, there is a lock system to ensure that the slideout can't move while driving. These locking mechanisms circa 2010 - 2012? Were defective and often jam in the unlocked position. The operator has no way of knowing that the lock is inoperative and not holding the slideout closed. This presents a danger to the integrity of the coach as a vehicle in motion, and a danger to passengers who are seat-belted into the slideout. In 2012...
Read the full complaint
powergear and kwikee (both divisions of lippert ( lci industries) & winnebago offered an "upgrade" kit to fix this slideout locks problem. This should have been a safety recall! Attached is the powergear bulletin regarding the kit supplied to 'upgrade' the locks so they would not fail in the open position. I have tried to get lci to acknowledge this problem, and they refuse. This problem exists on many brands of rv's that use the powergear arm and pinion slideout mechanisms. A web search of the rv forums will yield stories of rv owners who have had various standings and major problems because of the failure of these locks. My personal experience is only that I discovered these locks on my coach were not working and am deeply concerned for my safety because of the risk posed by two of my slides not being locked. Lci has declined to do more than offer a 25% discount on the entire slide mechanism (much more than needed to repair this issue).
While operating the driver front slide, the harness that encases electrical wires in a plastic chain, did not flow back into the box designed for it. The plastic chain failed and the harness backed up and got wedged between the area it slides into and the exterior of the slide outside the motor home squashed the harness and electrical wires. And of course, because you are inside the rv closing the slide, you don't see the damages until its too late. That harness also is attached to a metal bracket which is in...
Read the full complaint
return attached to the moving slide. With 50 amp service plugged into the rv, I believe this could be a severe electrical hazard. The plastic chain harness also became detached from the rear of the "box" it slides into which is supposed to be permanently attached to the rv. I have pictures of the damages when this happened to my coach. I have also reviewed internet forums. There seems to be a consistent problem with this design. It's my opinion that electrical hazards like this could cause bodily injury or start fires. I am surprised that I have not seen, nor gotten, any recalls for this issue. I have heard others say that this was a bad design, and yet winnebago industries knows this, will not elaborate on their technical fix, or a put out a recall on this problem so that it doesn't happen again to us or others. Without recall, and this happening to someone else, they might not be so luck to rectify this on the road because the damages could be more severe updated 11/14/13*cn
Winnebago Journey: every year compared
All Journey years2011 Winnebago Journey vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2011 Winnebago Journey | 2 | 3 | C | |
| 2011 Winnebago Adventurer | 3 | 3 | B | Compare |
| 2011 Winnebago Aspect | 1 | 0 | A | Compare |
| 2011 Winnebago Journey Express | 1 | 0 | - | Compare |
| 2011 Winnebago Tour | 1 | 4 | C | Compare |
| 2011 Winnebago Itasca | 1 | 0 | D | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2011 Winnebago Journey
Does the 2011 Winnebago Journey have any recalls?
Yes - NHTSA lists 3 recalls for the 2011 Winnebago Journey: electrical system (December 2012); engine and engine cooling (October 2011); equipment (October 2010). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2011 Winnebago Journey?
By the complaints owners filed with NHTSA, the most common problem areas are the electrical system (2), body, doors & structure (1), seats & seat belts (1).
How many complaints has the 2011 Winnebago Journey had?
2 complaints have been filed with NHTSA, the first on October 31, 2013 and the latest on January 27, 2021. Of these, 0 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.
Is the 2011 Winnebago Journey a reliable vehicle?
Its Safety Index is 59 out of 100 (grade C: about as many problems as a typical Winnebago Journey year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Winnebago Journey years have the most complaints?
2004 (11), 2005 (6), 2003 (5). See every Winnebago Journey year compared.
What should I do if my 2011 Winnebago Journey has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data