Vehicle description: motor home and commercial chassis. The rear axle u-bolts may not be tightened correctly due to random failure of production tooling in the specified time span.
Suspension
Workhorse W22 Suspension problems by year
5 complaints filed with NHTSA about the Workhorse W22's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Latest W22 suspension complaints
Multi-failures of the braking system on my 2002 workhorse w-22 chassis. All four calipers have been replaced as well as front wheel bearing and seals due to the extreme heat generated when the system failed. This occurred in july 1st 2007, july 23,2007 and feb. 4 2008, .When failures occurred the motor home was going slow enough so that a crash did not occur. A recall according to nhtsa 09v110000 has been set up but talking to workhorse technical and bosh it (the recall) has not finalized even though the fix...
Read the full complaint
is now known (may 2009 interm notice #2). Below is one of the notes that I wrote to workhorse: on 3/11/2010 11:57:42 am, none wrote: my mh vin --[redacted] received a interm notice on the above brake campaign but when I went to my internet page my motorhome in the workhorse.Com section I noticed that in the area for open campaigns it was not listed. Can you explain why? Email me or call me at [redacted]. [[redacted]] and the reply from workhorse technical which states: "on 3/11/2010 12:31:28 pm, workhorse support wrote: thank you very much for your question. The recall has not 'officially' been released. The letters that were sent were interim letters notifying owners of the potential problem. We are required to have 50% of the parts on the shelf before we can issue the official recall. We are working on adding a page to our website with notices and information. Please continue to watch our website for the page to go live." Along with this I called elie azzi director, product warranty bosch braking systems corporation 401 north bendix drive south bend, indiana 46628 phone: 574-237-3104 who informed me that bosch has not started to retool to make the needed parts because of some riff between workhorse and nhtsa. To all of this I am wondering if there is a recall and is there any reason to think that workhorse will live by it. If you need the written note from workhorse please send me a place to send it and I will comply. *Tr
Tl*the contact owns a 2004 fleetwood pace arrow recreational vehicle on a 2003 workhorse . The contact stated that the plastic front wheel bearings and the front disc brakes overheated. In addition, the dealer discovered that the rear brakes also failed. The vehicle has not yet been repaired. The failure mileage was 11,119 and current mileage is 12,536. Updated 04-23-09 *bf the consumer stated the front axle plastic oil cups, innre axle seals, rotors and brake pads were destroyed by heat. During an visual...
Read the full complaint
inspection, it was apparent that the rear brakes were not working due to lack of contact between the brake pads and rotors. The rv has not been reapired duee to an ongoing investigation by the consumer. Upated 05/01/09. *Jb
Tl*the contact owns a 2002 workhorse w22 trailer. When the contact exited the vehicle, he smelled the brakes and wheel bearings burning. The contact removed the wheel and noticed oil from the wheel bearing covering the tire. The vehicle was taken to the dealer and repaired. In october of 2007, the contact smelled an odor coming from the rear brakes. The vehicle was taken to the dealer, but they could not duplicate the failure. The current and failure mileages were 16,000. Updated 04/22/08. *Lj the consumer...
Read the full complaint
was told the rear brakes would not be replaced with upgraded brakes. The consumer stated the problem still exists with the brakes. The check engine light illuminated. The cruise control did not come. Updated
2004 Southwind motorhome (by fleetwood corp - on workhorse chassis model w22) vin [[redacted]]. Factory installed shock absorbers on front of vehicle are inadequate for weight of motorhome. When hitting a bump or dip in the road the bouncing or porpoising is almost uncontrollable. The workhorse representatives are replacing shocks on models like mine, but refused to correct the situation unless I add more weight to the front end, which in my opinion, doesn't make sense. *Nm updated 07/19/2012 *js information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6)
We have a 2001 dutchstar class a motorhome, built on workhorse chassis number 28321. I am writing for a number of reasons. The first being that I am requesting information on possible recalls that include this unit. I understand that there are two campaigns for the 2001 workhorse chassis, nhtsa # 04v084000, having to do with service brakes, hydraulic and # 01v317000, having to do with suspension:rear:springs:leaf spring assembly:u-bolt, leaf spring to axle. I would like to know whether our unit is included...
Read the full complaint
and if so, why we were not notified. The second reason I am writing has to do with the abs brake sensors on the front wheels. In october of 2003, we had to have the right brake sensor replaced after it had burned up with only 13,523 miles on the unit. On july 6, 2004, both front abs brake sensors burned up and required replacing with only 16,367 miles. Luckily, we were traveling at a low speed as the lack of the sensors apparently caused both front brakes to lock up, which could have been extremely dangerous had we been traveling on the highway instead of a city street. While I realize that the unit is out of the 3 year warranty, this appears to be a manufacturers defect when the same units burn up within 3000 miles. I have also spoken to a friend that has a 2002 w22 chassis and she has had the same problem, causing her to replace both front sensors. These sensors should be designed to last a lot more than 16,000 miles and certainly more than 3,000 miles. I feel that workhorse should take responsibility and reimburse us for the cost ($365.35) Of the replacement of both abs brake sensors. *La
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data