Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Engine & cooling

BMW 128I/135I Engine problems by year

35 complaints filed with NHTSA about the BMW 128I/135I's engine & cooling. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.

Engine complaints by model year

YearEngine complaintsCrashesInjuriesRecalls
201011000
200914000
200810000

Latest 128I/135I engine complaints

2009 BMW 128I/135IEngine & cooling

VANOS chamshaft bolts broke, and had to pay $3,200 to replace assembly, and restore timing in engine. There is currently an open recall for 2010+ models but the problem still occurs on 2009 models as well. This is a huge risk for drivers as the car can randomly stall and cause fatal accidents and/or financial burden. This problem has been addressed for earlier models, and needs to be held to the same standard for later models with the same engine.

Filed Incident EngineNHTSA 11631292
2009 BMW 128I/135IEngine & cooling

The contact owns a 2009 BMW 128I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. Parts distribution disconnect.

Filed Incident Engine and engine coolingNHTSA 11622707
2009 BMW 128I/135IElectrical systemEngine & cooling

My electric water pump failed and my car overheated 3 times (once resulting in thick white smoke coming from the engine) tow trucks were called and fire department notified. Car is now unused on drive way as it just overheats constantly when turned on.

Filed Incident Electrical system · EngineNHTSA 11609838
2010 BMW 128I/135IEngine & cooling

First notified of recall in October, 2023. After 8 months, BMW tells me there is no remedy available. Eight months is more than a reasonable amount of time to remedy this defect. Please help! Thank you.

Filed Incident EngineNHTSA 11594093
2010 BMW 128I/135IEngine & cooling

The contact owns a 2010 BMW 128I. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Filed Incident Engine and engine coolingNHTSA 11589620
2010 BMW 128I/135IEngine & cooling

The contact owns a 2010 BMW 128I. The contact stated that while driving at a slow speed and pulling into the driveway, the vehicle stalled. While driving on two occasions, the vehicle lost motive power and stalled. The check engine and other unknown warning lights were illuminated. Additionally, door and trunk failed to open. The contact's husband checked the vehicle and noticed there was power being distributed to the battery. The vehicle was taken to the local dealer, who was unable to duplicate the failure....

Read the full complaint

While the vehicle was still at the local dealer, it was diagnosed that the CAS module needed to be replaced. The vehicle was repaired, but the failure recurred. The contact stated that the failure was related to NHTSA Campaign Number 23V707000 (Engine and Engine Cooling). The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 100,000.

Filed Incident Engine and engine coolingNHTSA 11570076
2010 BMW 128I/135IEngine & cooling

The contact owns a 2010 BMW 128i. The contact stated that while driving at undisclosed speeds, the vehicle started running rough. The check engine warning light was illuminated. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 52,000. VIN tool confirms parts not available.

Filed Incident Engine and engine coolingNHTSA 11567257
2008 BMW 128I/135IEngine & cooling

The owns a 2008 BMW 135I. The contact stated that while driving at various speeds, the vehicle failed to properly accelerate while depressing the accelerator pedal. On several occasions the check engine warning light illuminated, and the vehicle went into LIMP Mode and decelerated to approximately 35 MPH. The contact performed a diagnostic test on the vehicle and determined that the fuel injectors were faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure. The failure mileage was 100,000.

Filed Incident EngineNHTSA 11515609
2008 BMW 128I/135IEngine & coolingFire

The contact owned a 2008 BMW 128i. The contact stated that after driving at an undisclosed speed in inclement weather, she parked and turned off the vehicle. The vehicle later caught fire when she returned. A bystander witnessed smoke coming from the front of the vehicle. The contact noticed there were flames coming from the engine compartment. The fire department arrived on the scene and extinguished the fire. Police and fire department reports were filed. The vehicle was towed to a tow yard, where it was deemed...

Read the full complaint

totaled by the insurance company. The manufacturer was made aware of the failure and offered credit toward the purchase of another vehicle. The contact later received notification of NHTSA Campaign Number: 22V119000 (Engine And Engine Cooling) and related the failure to the recall. The failure mileage was approximately 120,000.

Filed Incident Engine and engine cooling · FirerelatedNHTSA 11510649
2010 BMW 128I/135IEngine & coolingFuel system

Summary POSITIVE CRANKCASE VENTILATION (PCV) VALVE HEATER: This recall involves an engine component known as the Positive Crankcase Ventilation (PCV) valve heater. The PCV valve heater may not have been produced to specifications which could lead to a short circuit. Safety Risk Should a short circuit occur, the PCV valve heater could overheat, lead to smoldering, and possibly start melting. In extremely rare cases, this could increase the risk of a fire. Remedy An electrical wiring harness with fuse protection for...

Read the full complaint

the PCV valve heater will be installed for free. If the PCV valve heater is damaged, it will be replaced for free. This may take up to several hours to perform.Per the instructions on the NHTSA.GOV If the manufacturer has failed or is unable to remedy this safety recall for your vehicle in a timely manner, please contact the NHTSA Vehicle Safety Hotline at: 1-888-327-4236 or TTY: 1-800-424-9153 or file an online complaint with NHTSA. Does a Bad PCV Valve Burn Oil? If you have a bad PCV valve, you are putting your vehicle at risk. The bad valve can create a leak which will cause your car or truck to have excessive oil consumption. The oil consumption will cause the oil to burn which will cause it to smell and will leave a puddle beneath your vehicle. If you notice either of these symptoms, give us a call here at Dennis Road Automotive to schedule service. Any oil leak is a bad leak that we want to check promptly to avoid high repair costs! PCV components are typically inexpensive, and esse https://www.thedrive.com/news/44680/bmw-recalls-almost-a-million-cars-over-valve-heater-fire-risk The PCV valve is easily one of the most important parts of your car, and although it is possible to continue to operate your car with a bad valve, it is not recommended as it can corrode your car's engine over time Common signs of a faulty PCV valve include excessive oil consumption, oil leaking, a blocked breather filter, and reduction in overall performance

Filed Incident Engine · Fuel / propulsion systemNHTSA 11507749
2009 BMW 128I/135IEngine & cooling

The contact owns a 2009 BMW 128I. The contact stated the vehicle overheated. There was a hole in the radiator. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who informed him that the radiator needed to be replaced. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated the failure was related to NHTSA Campaign Number: 17V683000 (Engine and Engine Cooling). The manufacturer was not contacted. The approximate failure mileage was 84,000.

Filed Incident Engine and engine coolingNHTSA 11496457
2010 BMW 128I/135IEngine & cooling

The contact owns a 2010 BMW 128I. The contact stated while driving 60 MPH, there were unknown warning lights illuminated. The contact was able to continue driving; however, the failure reoccurred while driving. Additionally, the contact stated that the vehicle was experiencing excessive oil consumption. The vehicle was taken to an independent mechanic where it was diagnosed that the PCV valve had failed. The independent mechanic associated the failure with NHTSA Campaign Number: 22V119000 (Engine and Engine...

Read the full complaint

Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 110,000. VIN tool confirms parts not available.

Filed Incident Engine and engine coolingNHTSA 11486477
2008 BMW 128I/135IEngine & cooling

The contact owns a 2008 BMW 128I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available. The consumer stated no contact from dealer in regards to the part being available.

Filed Incident Engine and engine coolingNHTSA 11476470

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience