Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Brakes

Can-AM Ryker Brake problems by year

31 complaints filed with NHTSA about the Can-AM Ryker's brakes. Spongy or hard pedal, ABS faults, brake failure, noises, parking brake and brake fluid leaks.

Brake complaints by model year

YearBrake complaintsCrashesInjuriesRecalls
20231000
20226200
202110000
20204000
201910000

Latest Ryker brake complaints

2023 Can-AM RykerBrakes

Brake light stays illuminated even when brakes are not engaged. Upon research internet shows this is a recall issue affecting 35,000+ can-am rykers but when I contact my dealer they say that it is not a recall. Can someone please look into this? I believe it should absolutely be a recall and fixed at no cost.

Filed Incident Service brakesNHTSA 11760603
2021 Can-AM RykerElectrical systemLightsBrakes

While driving the brake pedal stays stuck causing the brake lights to be illuminated while driving, and causing the motorcycle to activate the ABS

Filed Incident Electrical system · Exterior lighting · Service brakesNHTSA 11562470
2021 Can-AM RykerElectrical systemLightsBrakes

Brake light stays due to brake pedal stays stuck.. on while driving causing the motorcycle to be activate the ABS Also handlebar tends to become loose

Filed Incident Electrical system · Exterior lighting · Service brakesNHTSA 11562469
2019 Can-AM RykerElectrical systemAcceleration & cruise controlBrakes

The Stability Control System engages on low speed left turns when it is not required. It does not engage on right turns at similar speed and sharpness of corner. Power is cut to the rear wheel and the right brake engages, causing a "wobble", unsteady, and jumping sensation. This creates unease and the sense of losing control. I've been told this is a common problem that the YAW sensor and sas system is faulting. please get this fixed as it is dangerous.

Filed Incident Electrical system · Vehicle speed control · Service brakesNHTSA 11546444
2021 Can-AM RykerBrakes

The contact owns a 2021 Can-Am Ryker. The contact stated that while driving at an undisclosed speed with the brake pedal depressed all the way to the floorboard, the vehicle failed to come to a complete stop. After adding extreme force on the brake pedal the vehicle stopped as intended. After restarting the vehicle, the vehicle seemed to return to normal functionality; however, the failure recurred. As a result of the failure, the vehicle collided with a parking barrier, causing damage to the undercarriage. No...

Read the full complaint

warning lights were illuminated. The vehicle was towed to the dealer, who was unable to determine the cause of the failure. The vehicle was not repaired. The manufacturer was notified of the failure but was unable to assist. The failure mileage was 200.

Filed Incident Service brakesNHTSA 11542697
2020 Can-AM RykerSteeringBrakes

While riding the 2020 Can Am Ryker Rally, going into left turns the Ryker will stutter and shake the right front and rear wheel. Feels as tho it is applying the ABS. This only happens on left turns. No issue (yet) doing right turns. Noticed it not long after i purchased the bike back in 2021.

Filed Incident Steering · Service brakesNHTSA 11540618
2022 Can-AM RykerSteeringBrakes

When making left turns, vehicle's rear tire wobbles severely. When doing this, it also causes the handle bars to try and straighten out during the turn almost causing the vehicle to hit a curb or guardrail. This only happens on left turns, never on right turns. After incident, the rear tire suspension feels spongy. I have taken the vehicle back to the dealer for this issue. The had it for 5 weeks and could never reproduce the issue. I have also contacted Can Am BRP about this issue who only recommended that I take the vehicle back to the dealership.

Filed Incident Steering · Service brakes, hydraulicNHTSA 11538304
2022 Can-AM RykerSteeringSuspensionBrakesCrash

I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn't my handlebars. It was my suspension starting to...

Read the full complaint

malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.

Filed Incident Steering · Suspension · Service brakesNHTSA 11536753
2019 Can-AM RykerSteeringTransmission & drivetrainBrakes

The vehicle Stability Control System engages on low speed left turns when it is not required. It does not engage on right turns at similar speed and sharpness of corner. Power is cut to the rear wheel and the right brake engages, causing a "wobble", unsteady, and disconcerting sensation. This creates unease and the sense of losing control. Can Am has a service bulletin that may be related to this problem: https://static.nhtsa.gov/odi/tsbs/2020/MC-10181946-0001.pdf They will apply this fix if under warranty, but my warranty has expired. Many people have experienced this or similar problems.

Filed Incident Steering · Power train · Service brakesNHTSA 11528711
2020 Can-AM RykerSteeringBrakes

The bike seems to get shaky or even start to skid while taking turns which causes the bike to pull either towards on coming traffic or guardrails. Somebody is either going to get seriously hurt or possibly die as result of poor design. My bike currently does this when it wants to I have no warning lights on. Please get involved and get this fixed, you'd possibly be saving a life.

Filed Incident Steering · Service brakes · Service brakes, hydraulicNHTSA 11528375
2021 Can-AM RykerBrakes

ABS intermittingly engaging when taking left corners. I have almost crashed twice now as the brakes are unexpectedly locking up while taking a mild curve at 35 mph. I have had the SAS reset once already and I am still having this problem.

Filed Incident Service brakes, hydraulic · Service brakes, electricNHTSA 11525440
2021 Can-AM RykerSteeringBrakes

When making left hand turns over 25MPH, the right tire and rear brake lock in causing the front to wobble and the rear to skid and jerk. There is no issue with right hand turns

Filed Incident Steering · Service brakes, hydraulic · Service brakesNHTSA 11524481
2019 Can-AM RykerSteeringBrakes

When making left hand turns the rear brake and front right surges on its own making it hard to control the vehicle. BRP knows the issue and has a TSB on it but the fix is a bandaid. The problem is the bearing failures that keep occurring in the pitman arm due to poor design, but BRP is saying this isn't happening, even though it is a major complaint on the BRP Ryker forms. BRP TSB number # 137209

Filed Incident Steering · Service brakesNHTSA 11520841
2022 Can-AM RykerElectrical systemBrakes

On left hand turns only, even at lower speeds, the VSS system is kicking in, preventing safe control of the vehicle, was almost rear ended today when my vehicle refused to accelerate out of a left hand curve, speeding rating curve was 20mph, I was doing 10mph. This occurs frequently to varying degrees on a regular basis, always on left hand turns only. It's never happened on a right hand trun or curve.

Filed Incident Electrical system · Unknown or other · Service brakesNHTSA 11513037
2022 Can-AM RykerSuspensionBrakesEngine & cooling

I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode

Filed Incident Suspension · Service brakes · EngineNHTSA 11507140

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience