The contact owns a 2023 Can-Am Ryker. The contact stated while driving at an undisclosed speed, the vehicle shuddered. No warning lights were illuminated. The vehicle was taken to a dealer to be diagnosed, and the contact was informed that the vehicle was performing normally. The vehicle was not repaired. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the tires needed to be replaced and balanced. The vehicle was repaired; however, the failure persisted. The manufacturer was notified of the failure. The failure mileage was 0.8.
Suspension
Can-AM Ryker Suspension problems by year
22 complaints filed with NHTSA about the Can-AM Ryker's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Latest Ryker suspension complaints
When entering a left hand turn at moderate speed, the vehicle will go into a lurching, bucking, hesitation period, usually when under slight or moderate acceleration. This results in an uncontrolled wobble that will eventually smooth out but can also result in a sudden burst of power that tends to rapidly propel the vehicle further to the left unless the throttle is quickly relaxed. Hard to describe, but the sensation feels like you are being "squirted" out of the turn. I first noticed this barely a month after I...
Read the full complaint
took possession of the machine and thought it might be a normal handling trait. As I became more acquainted with the various user's groups, I find it was not normal and a much more serious problem that apparently hasn't been successfully addressed by the manufacturer over the years it has been reported. Unlike some of the others who have reported similar occurrences, my vehicle has not displayed any error codes on the display screen, nor has it gone into a limp mode. Due to these conditions, I will not take this vehicle on any road trips for fear of being stranded or involved in an accident being caused by this dangerous handling anomaly. I love this vehicle, but due to this issue, I don't feel it is safe.
Common problem amongst Can Am Ryker riders. When making a sweeping left turn between 20-40 mph, the right front wheel will brake/accelerate on it's own and the bike will jerk. It also causes the right wheel to wobble forcing me to accelerate or decelerate to retain control of the bike. I quick google search produced hundreds of other riders experiencing the same issue and that BRP/Can Am does not have a permanent fix for this issue. I love riding my Ryker, but have avoided it for anything more than a couple mile ride to the store for fear of losing control or being rear ended when it decelerates on it's own. Please investigate.
Vehicle repeatedly goes in to limp mode for VSS faults related to steering codes. Dealers are unable to repair and report that many other of the same model have the same problem. Many other owners in the online community report the same issue with no fix in sight. The vehicle is essentially unusable and the manufacturer does not appear to have any intent to remedy the situation.
When making left turns, the Ryker suddenly would 'skip' on the right hand side, as though it was lagging behind any time above about 35mph. This caused a safety concern because to keep with the speed of the road, the Ryker would begin to slip out of a turn and be unstable. No warning lights, brought to mechanic and they stated this was a common problem, enough that BRP has issued a service bulletin and they saw five with this problem in two weeks.
The contact owns a 2020 Can-Am Ryker. The contact stated that while making left turns at approximately 25 MPH, the rear wheel vibrated abnormally. There was no warning light illuminated. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 9,000.
yaw sensor, codes C0063, C006C, rear end feels like it's trying to break free from the road.
Front end wobble at 45+ miles an hour. The front end is not stable. The bike pulls left and right.
I have a 2022 Can-Am Ryker 900 sport. when I purchased it around a week or two later, my left brake and wheel started squeaking loud. I returned it to the dealer. One of the service men said its brand new brakes and tires give it time to wear down.low brake warning came across the screen and my handlebars started feeling loose,a lot of play. I returned it again. They checked my handlebars and fixed my front truck and said my brand new brakes were fine. It wasn't my handlebars. It was my suspension starting to...
Read the full complaint
malfunction making my left brake pad wear uneven low brake warning came across again. I returned it again for the recalls the service man assured me this will fix my problem. last night August 5,2023 I was out, riding with friends, proceeded into a curve, and my handlebars would not allow me to turn my wheels. My left wheel seemed as though it was trying to lock up. I could not turn the curve.it started to do what they call the Death turn. Two of my friends almost ran into the back of me because the bike slowed itself down, My check engine light started flashing VVS fault code came across the screen, I end up hitting the curb scratching my rim, and now the bike is on limp mode.
During left-hand curves, even at slow controled speeds, the vehicle decreases engine power and the brakes begin to pulse. Eventually, the vehicles engine light illuminates, throws trouble codes for the VSS (VEHICLE STABILITY SYSTEM), and goes into "limp mode", which gives the vehicle a limited amout of power and speed, in order to be able to reach home or service center. Dealership techs were able to reproduce these symptoms on test rides. First attempt at repair was the changing of the YAW sensor. The second...
Read the full complaint
attempt of repair was a bearing and bushing replacement repair kit in the pitman arm housing of the steering system. The third attempt of repair was to reprogram the steering angle sensor. It is currently back at the dealership for the ongoing problem of power loss and braking during left hand curves. This is a hazard to the operator of the vehicle and motorists in the vicinity because the vehicle is changing speed and direction with no operator input. Research shows this to be a very common problem for owners of this vehicle, and very little knowledge of the cause or repair from the dealerships or the vehicles manufacturer. Something needs to be addressed with this issue. Quite possibly a component or system of components may need to be redesigned and recalled. A recall pertaining to a wiring harness on the front fenders of this three wheeled vehicle has been addressed and repaired. I would like for my vehicle to operate correctly, as it should with a proper and permanent solution. and hopefully this problem be eradicated from the community of owners of this vehicle.
When making a left hand turn, at any speed over 35mph, the rear of the bike wobbles, and the front tires, at least one if not both begin to automatically brake. I've looked into it, it appears to be related to a SAS/VSS issue with the suspension and stability having too much play. I've researched and found that so many people reported it to NHTSA that you have an article, 137209. They will not fix this issue under recall because they claim it's not an issue being reported enough. I can't afford to have this...
Read the full complaint
issue that came from factory fixed because they don't want to fix their issue. This is a major concern, at highway speed on an overpass I experience this issue daily and I'm afraid it's going to cause an accident, because when it occurs the bike automatically slows 10-15 mph without me hitting the brakes, and I am worried I'm going to get hit by someone because of a defect in their product.
I had a VSS Fault and engine power cut off while coming in a left turn. Rear tire became wobbly and almost threw me off. Bike went to limp mode and slowed down. Had engine codes C006C and C0063 which are common problems with the steering and engine going to limp mode
I purchased my Ryker in June of 2022. Since my purchase I have been dealing with a death wobble in the front during left turns, a serious wobble in the rear during left turns, and continuous vss fault/Limp home mode failure. I reported the issue to the dealer and they attempted to correct the issue, but it has continued to fail. I contacted BRP the parent company, and they refused to respond. There have been 2 safety recalls and I am no longer feeling safe to ride the vehicle.
When making left hand turns under load, right wheel starts to slip, tuck, traction control kicks on, rear wheel starts modulating power with breaking, and then the right front wheel gains traction. this is a cycle and occurs every time I make a left and turn. This process occurs very quickly. Close to 1 time per second while making the left hand turn. It destabilizes the machine and causes partial loss of steering control. These symptoms are not replicated on the left front wheel when making right hand turns. Air pressure is correct on all tires. No loos suspension components noted. As mentioned, this occurs during every sweeping left hand turn.
I got a VSS fault code (C0063) that sent my Ryker into a limp home mode which greatly reduced the speed at which I could travel. This code indicates a problem reported from the yaw sensor. Had I been on an Interstate highway, this could have possibly been a serious situation. I was about 10 miles from home but made it home safely. This fault code seems to be a recurring problem to many Ryker owners and I feel that BRP should either make a new sensor, eliminate it completely or look at the overall design of the...
Read the full complaint
vehicle to possibly discover a flaw in the frame, etc. This code can only be removed by taking the vehicle to a reputable dealer that has the proper equipment to do it and unfortunately these dealers are few and far between. The closest one to me is 50 miles.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data