Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Steering

2008 Dodge Ram 2500 Steering problems

Owners have filed 181 complaints about the 2008 Dodge Ram 2500's steering with NHTSA - 53% of all its complaints, most recently on August 19, 2022. They describe 6 crashes, 1 fire and 3 injuries. Loss of power steering, stiff or loose steering, wandering, column and rack problems.

Complaints
181
Recalls
5
Crashes
6
Fires
1
Injuries
3
Deaths
0

Steering recalls for the 2008 Dodge Ram 2500

Steering: tie rod assembly

13V529000271,733 vehicles affected

The problem
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
The risk
A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
The fix
Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.

Steering: tie rod assembly

13V528000706,664 vehicles affected

The problem
Chrysler Group LLC (Chrysler) is recalling certain model year 2003-2008 Dodge RAM 2500 4x4 and 3500 4x4, model year 2007-2008 Dodge RAM 3500 4x2 Cab Chassis and model year 2006-2008 Dodge RAM 1500 Mega Cab 4x4 trucks manufactured February 12, 2002, through February 13, 2008. The left tie rod assembly may break.
The risk
A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
The fix
Chrysler notified owners and launched its recall campaign in January 2014. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N62.

Steering: tie rod assembly

11V350000242,780 vehicles affected

The problem
Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4x4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4x4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.
The risk
This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.
The fix
Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler at 1-800-853-1403.

Steering: shaft pitman

10E0130001,500 vehicles affected

The problem
Fabtech is recalling certain aftermarket replacement pitman arms, p/nos. Fts93001 and ft44039, installed for use on certain 2003 through 2008 dodge 2500 4wd, 3500 4wd, and 1500 4wd mega cab vehicles. The pitman arm can fracture and break away from the steering box causing total loss of steering control.
The risk
Steering loss could result in a vehicle crash possibly resulting in property damage, injury or death.
The fix
Fabtech will notify owners and authorized installers will inspect for defective pitman arm and replace if necessary free of charge. The safety recall began on may 24, 2010. Owners may contact fabtech at 1-877-432-2832.

Steering: tie rod assembly

09V00500032,782 vehicles affected

The problem
Chrysler is recalling 32,782 my 2008-2009 dodge ram 2500, 3500 and 3500 cab chassis pickup trucks equipped with powers and sons steering linkage. The steering linkage drag link inner tie rod to pitman arm ball stud may fracture. Also the steering linkage damper attaching the bracket may yield and shift on the linkage.
The risk
This could result in a loss of steering control and the restricted ability to turn the vehicle in one direction increasing the risk of a crash without warning.
The fix
Dealers will replace the steering linkage drag link inner tie rod end assembly, and inspect the steering linkage damper bracket free of charge. The recall is expected to begin on or before february 16, 2009. Owners may contact chrysler at 1-800-853-1403.

Steering complaints

Steering

The contact owns a 2008 Dodge Ram 3500. The contact received notification of NHTSA Campaign Number: 13V529000 (Steering) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

Filed Incident SteeringNHTSA 11480264
SteeringElectrical system

While driving the vehicle suddenly lost engine power and turned off. When this happened the steering column locked. It did not just loose power steering. The column itself entirely locked up. At this point the vehicle had no steering and limited breaking and went off the road. Thankfully it just went into a ditch and no damage was done. The vehicle turned right back on. The next day I recreated the problem on some friends property. I gave the keys in the ignition a small tug and the engine would stop and the...

Read the full complaint

steering column would lock. The ignition never rotated out of the on position and the key remained in the ignition. I recreated this probably 5 times and it did the same thing every time. I then brought it to the dealer but they didn't have the parts to repair it so I didn't have them look at it. I had to use the vehicle sooner then they could repair it to pull a camper about 1200 miles. I diagnosed the problem to be the ignition switch. I replaced the switch myself and the vehicle has not had the same problem since. I have given the keys in the ignition the same kind of tug and it is no longer a problem. I do have the switch available for inspection. I personally can totally understand the engine turning off due to an ignition switch failure but I believe the actual steering column locking is unacceptable.

Filed Incident Steering · Electrical systemNHTSA 11446616
Steering

Tl* the contact owns a 2008 dodge ram 2500. The contact stated while driving 4 mph, he heard an abnormal sound coming from the vehicle. The contact stated no warning light was illuminated. The contact stated that he attempted to steer to the vehicle to the right however, the vehicle failed to respond. The vehicle was stopped in the middle of the roadway. The vehicle was not drivable. The vehicle was towed to his residence. The contact called colorado springs dodge (7455 austin bluffs pkwy, colorado springs, co...

Read the full complaint

80923, (719)475-8550) and the dealer was made aware of the failure. The vehicle was not diagnosed nor repaired. Upon investigation, the contact associated the failure with nhtsa campaign number: 13v529000 (steering) however, the vin was not included. The manufacturer had not been informed of the failure. The failure mileage was approximately 289,000.

Filed Incident SteeringNHTSA 11413495
SteeringTransmission & drivetrainElectrical systemFire

Death wobbles: I have replaced upper and lower ball joints with problem solvers. Replaced the tie rods and ends. Replaced the stabilizer shock, replaced the track bar rubber bushings, replaced the otter universal joints on the aam 9.50 14 Bolt electric hubs. New shocks all around. Drove to salt lake city and the death wobbles came back have to pull off the hwy and come to a stop while it is shaking the truck apart. 15 Times from idaho.. This is a major safety problem the steering box has problems and it is not...

Read the full complaint

listed under any recalls. New alignment also. New transmission, at 163,000 boiled over onto the turbo, the dipstick never fit in the tube and fluid caused the truck to catch fire. 3 Years ago.

Filed Incident Steering · Power train · Electrical systemNHTSA 11222935
SteeringSuspensionWheels & tires

I was going 65 miles per hour on the freeway when my truck violently shake back and forth so hard I had to come to a complete stop to get it to stop. I've had the front suspension replaced 3 times in the past year and still have what they call a death wobble. I have spent so much money on rentals and on shop repairs trying to repair this problem and still cannot go over 40 miles an hour without it violently shaking. This is dangerous to my family it could kill somebody and I think dodge should be responsible for...

Read the full complaint

taking action on repairing this or figure out the problem . I have called dodge and they have told me it is not a recall so they cannot help me out. I had bought brand new tires a brand new drive line along with replacing the front suspension 3 times now and I still cannot drive my truck without it causing violent shaking. It has 87,000 miles on it has never been in an accident so I cannot figure out why this started happening but I think that it should not be okay to have this truck on the road it's going to hurt somebody.I have only driven a couple of times and spent alot on rentals .I will never in my life buy another dodge due to lack of concern for my family's saftey.I own this vehicle outright and wish I would have never bought it.Thats how scary it is to drive.

Filed Incident Steering · Suspension · WheelsNHTSA 11139320
Steering

The steering wheel is suddenly very loose and there is a clunk under the driver's side when I turn the wheel from right to left. This issue came out of nowhere. I do not drive the truck often and I did not notice any incidence of note; there was no time when I noticed a sudden bump or clunk in the steering wheel. It came on gradually, but rapidly. These symptoms seem to align with a prior recall on this vehicle concerning the left tie rod ball stud, which can fracture at low speeds without notice, rapidly becoming dangerous for the occupants of the vehicle as the steering wheel can become inoperable.

Filed Incident SteeringNHTSA 11096491
Steering

Loss of steering control while driving. As a last minute thought I decided to stop at a convenience store before heading down the highway, down a hill which had a sharp u shaped turn at the bottom. When making a right hand turn into the parking lot the steering wheel became disengaged and began to spin completely around without any control. Had I continued on my way I hate to think how I would have survived what waited at the bottom of the hill. I'm not a mechanic but it seems the steering rod bolt was not...

Read the full complaint

installed properly and was not completely through the holes to the connection. Thankfully, I had turned into a parking lot when it lost connection. I'm sure this has something to do with recalls: n62, n49, l16, h46, h36.

Filed Incident SteeringNHTSA 11052574
Steering

The passenger side tie rod fell apart. The ball separated from the body of the tie rod. This happened at low speed as I was veering to the right, resulting in a loss of steering. There were no warning signs that this was about to happen.

Filed Incident SteeringNHTSA 11047056
Steering

DEATH WOBBLE, DRAG LINK FAILURE

Filed Incident SteeringNHTSA 11022625
Steering

I bought my truck brand new in 2008 ..It has what they call a death wobble , it only does it at speeds 50 or higher .. Many dodge truck owners also experience the same trouble.. It occurs at higher speeds when you hit a small bump , or rough patch ..The front end of the truck will come unglued , and start shaking very violently ..It first did it in 2011 , and it still does it .. I contacted the dodge corporation about it , but they refuse to do anything about it ..

Filed Incident SteeringNHTSA 11001267
SteeringCrash

The right (passenger) lower control arm ball joint failed while traveling approximately 30 miles per hour. The failure was a separation of the ball and bolt from the cup that is pressed into the cup. Total control of the truck was lost and a minor accident occurred when the truck ended up on a median with the left (driver's) tire on the median and the other tires on the road. The median is approximately 16 inches above the road bed. The ball joint is part of the steering mechanism. The steering arm ended up...

Read the full complaint

pushing the right tire out at 45 degree angle outside or to the right. The left front tire was at a 45 degree angle to the left. The vehicle was on a city street nearing an intersection to a 55 mile an hour highway that the vehicle was about to turn left on. The driver reported a shaking of the steering wheel similar to a flat and began to slow down when control was lost due to the mechanical failure occurred. Had this failure happened at highway speeds, the dodge ram would have rolled. The miles on the truck were 99,455. A ball joint should not fail with less than 150k miles. The vehicle was repaired on 2 may, 2017 and the left (recalled) ball joint, all steering hardware and the failed ball joint were replaced by a dodge dealer. The recalled part had not been replaced prior to purchasing the truck in december, 2016. The crash ended up in minimal to no damage to the vehicle. The vehicle had to be towed to the dodge dealer and the tow truck driver had to use plastic sliders to get the truck safely onto the flatbed tilt tow truck.

Filed Incident SteeringNHTSA 10983190
SteeringWheels & tires

My front left tie rod in my truck broke causing extensive damage. It punctured a tire in the sidewalk which is not repairable , cracked a wheel which they do not make anymore so need to replace 4 to match and bent or broke every single component in the steering linkage setup. I have made numerous attempts for some help and have gotten none. I have sent multiple emails with no replies, tried the chat system on the mopar site and the person (alex av1129 employee number) was of no help either. I have purchased a...

Read the full complaint

steering linkage setup from les schwab for $649 before I knew this was a past recall issue. I never got any notification for the recall or did I get offered the buy back option. I also called mccord dodge in longview washington explaining my issue and was told by a lavonya in the recall dept there's nothing she can do this is an issue between you and chrysler not you and mccords. I also asked lavonya my address on file and she read it exactly and I received no notification from them either. She was quite rude. She told me most people do routine maintenance at mccords and they find out these issues. I let her know I do my own maintenance and am not required to do business with them since my warranty has expired. Please help thanks [[redacted]] [[redacted]] [[redacted]] [[redacted]] [[redacted]] information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6).'*Jb

Filed Incident Steering · Wheels · Unknown or otherNHTSA 10980314
Steering

Death wobble when making a turn or hitting a bump in the road. Must slow down considerably in order for this to stop. Dangerous on the highway or going over 30 mph. All recalls have been completed on this vehicle and we still have the problem

Filed Incident SteeringNHTSA 10966100
Steering

At 75 mph on interstate towing a 25 ft. Travel trailer left lane passing semi. My truck encountered bridge seam. Front steering began to shake violently. Maintained control of truck. Event lasted maybe 30 seconds and only stopped after slowing to 30 mph. This is the fourth occurence of the "death wobble". Took truck to dealer after the first, was told chrysler knew of the problem but had no remedy.

Filed Incident SteeringNHTSA 10926923
SteeringElectrical systemBrakes

Both axle joints bad. All four tie rods have "play" in them. Ball joints are worn out. Had right side tie rod end pop out while traveling down highway. 2015 Rotors are heat cracked. Presently headlights are burning out after one month replacement. Presently control panel led lights for heating are out. 2009

Filed Incident Steering · Electrical system · Service brakesNHTSA 10916736
Steering

Tl* the contact owns a 2008 dodge ram 2500. The contact received notification of nhtsa campaign numbers: 11v350000 (steering) and 13v529000 (steering). The contact opted for the buy back program. The contact stated that the dealer and manufacturer were notified and a check was written by the dealer; however, when the vehicle was taken to the dealer, the dealer demanded that the windshield and front passenger side fender be repaired at the owner's expense. The contact stated that the third party inspector was...

Read the full complaint

supposed to offer them a deduction to the re-purchase offer; however, the third party inspector was never scheduled by the manufacturer. The contact phoned the program administration/administrator; however, was unable to make contact. The contact had not experienced a failure. Parts distribution disconnect.

Filed Incident SteeringNHTSA 10897597
Steering

Tl* the contact owns a 2008 dodge ram 2500. The contact stated that the steering wheel was unstable while driving 40 mph and more. The steering wheel voluntarily moved around and the contact felt unsafe driving the vehicle. The contact stated that the failure occurred after the dealer replaced the wheel ball joints. The dealer was notified of the failure and no repairs were made. The failure mileage was 30,000.

Filed Incident SteeringNHTSA 10896080
Steering1 injury

Truck shakes/ wobbles and sometimes loose steering control when I go over sudden uneven road conditions.

Filed Incident SteeringNHTSA 10887957
Steering

High speed death wobble, uncontrolable steering, dangerous. Scary, moving upwards of 50-60 mph highway contry doesnt matter where

Filed Incident SteeringNHTSA 10871065
Steering

Tl* the contact owns a 2008 dodge ram 2500. While driving approximately 30 mph, the front passinger side tie rod suddenly fractured and the vehicle became very difficult to steer. The cause of the failure was not diagnosed nor repaired. The manufacturer was not notified of the failure. The failure mileage was 107,000.

Filed Incident SteeringNHTSA 10839557
Steering

Tl* the contact owns a 2008 dodge ram 2500. While driving approximately 60 mph, there was an abnormal noise coming from the vehicle and the steering wheel seized without warning. The vehicle was taken to an independent mechanic where it was diagnosed that the steering assembly needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The vin was included in nhtsa campaign number: 13v528000 (steering). The failure mileage was 60,608. Updated 02/12/16*lj according to the invoice, the lower front ball joint, steering damper and inner and outer tie rod ends were replaced. Updated 02/25/16.*Jb

Filed Incident SteeringNHTSA 10811678
SteeringTransmission & drivetrainAcceleration & cruise control

Steering recall- vehicle initiates into the death shake when speed exceeds 55mph on a turn. Transmission problems- vehicle has problems shifting normally by shifting straight into 4th gear when shifting into drive and will drive sluggishly

Filed Incident Steering · Power train · Vehicle speed controlNHTSA 10807878
SteeringWheels & tires

Tl* the contact owns a 2008 dodge ram 2500. While driving at 50 mph, the vehicle shook. The vehicle was taken to the dealer where it was diagnosed that the steering wheel, tie rods and other unknown parts needed to be replaced. The vehicle was repaired however, the failure recurred. The manufacturer was not notified of the failure. The failure mileage was 15.

Filed Incident Steering · WheelsNHTSA 10790281
Steering

Many refer to it as the "death wobble" and it has done it at least once every time I drive I have experienced the death wobble on the highway while going 75 mph and it causes me to have to slow down drastically. I am not only worried for my wellness/life but my family members as well. This vehicle is used as a daily driver.

Filed Incident SteeringNHTSA 10788982
SteeringSuspension

Vehicle wanders when driving had 2 front end alignments and tires balanced has not corrected problem. Had it reinspected and left tie rod end worn. Was told it does not come under recall for steering linkage.

Filed Incident Steering · SuspensionNHTSA 10788213

Dodge Ram 2500 steering complaints by year

Ram 2500 steering problems, every year

Had a steering problem with your 2008 Ram 2500? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience