Forest River, Inc. (Forest River) is recalling certain 2025-2026 Wildwood and Salem travel trailer recreational trailers. The exterior transit latch on the rear patio door cannot be unlocked from inside the vehicle.
Body, doors & structure
Forest River Salem Body problems by year
2 complaints filed with NHTSA about the Forest River Salem's body, doors & structure. Doors, hoods and latches, frame rust, sunroofs, leaks, trim and structural failures.
Body complaints by model year
Body recalls
Forest River, Inc. (Forest River) is recalling certain 2025 Salem and Wildwood travel trailers. The side entry gate latch may become unlocked, allowing the strut to open the gate during transit.
Forest River, Inc. (Forest River) is recalling certain 2024-2025 Coachmen Catalina, Forest River Aurora, Cascade, Cedar Creek, Cherokee, Sandpiper, Sierra, 2025 Campsite Reserve, Impression, Pause, Puma, Sabre, Salem, Vengeance, and Wildwood fifth wheel and...
Forest River, Inc. (Forest River) is recalling certain 2024-2025 Salem SBF325RL, and Wildwood WBF325RL travel trailers. The tires may contact chassis components, causing the tires to fail.
Forest River, Inc. (Forest River) is recalling certain 2024-2025 Salem, and Wildwood travel trailers. The affected vehicles may not have a secondary emergency exit installed.
Forest River, Inc. (Forest River) is recalling certain 2024 Salem and Wildwood fifth wheels. These vehicles may be missing a secondary emergency exit.
Forest River, Inc. (Forest River) is recalling certain 2021-2022 Salem and Wildwood fifth wheel travel trailers. The awning rail may not be attached to a backer in the sidewall, which can allow the awning to detach while the vehicle is in motion.
Latest Salem body complaints
The deadbolt key lock fell out and was lost from the door latch which was a fastec 43610-09 travel trailer white latch. *Tr
The main frame of the trailer has failed doe to a gross error of the mechanical design in making the front crossmember too thin to support the weight of the trailer. Additionally, the requirement to use a load leveler by the dealer as recommended by the manufacturer increases this load to the point that the calculated safety margin of the crossmember that supports the tongue is 1:1. The crossmember material is standard a36 steel with a nominal thickness of .1 Inches and is bent in the shape of a c channel, welded...
Read the full complaint
to the front of a 10 inch i-beam which comprises the majority of the load bearing structure of the main frame. The front crossmember in question is used as a support point for the underslung tongue that is welded to the lowermost point of the I beam and the front crossmember creating a fulcrum ratio of approximately 2.896 : 1. The lever being the tongue tubing itself that is then pushed upward into the front crossmember with a force of 2400 pounds as calculated using a measured tongue weight of 830 pounds with the vehicle completely unloaded of all cargo and wastewater and with empty propane cylinders. This force is supported by a tongue comprised of a 2x6 rectangular tubing with a nominal wall thickness of .098 Inches that has deformed longitudinally and expanded laterally across the short axis directly under the front crossmemeber. The front crossmember has then receded into the underbelly of the camper and begun a vertical crack that has compromised the handling characteristics of both the tow vehicle and the trailer at speed. Additionally, the electrical braking system has failed due to other design flaws in the protection of wiring within the wheel and the design of the mechanical actuation that impinges on the wiring harnesses freedom of movement while being actuated. *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data