- The problem
- Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.
- The risk
- If the B+ circuit shorts to ground, it may lead to a fire.
- The fix
- Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
Vehicle safety record
2006 Hino NV8J Problems, complaints & recalls
No owner complaints about the 2006 Hino NV8J have been filed with NHTSA. It is covered by 9 recalls, the latest in December 2012 for the cables.
NHTSA data checked
FFar more problems than a typical NV8J year, for its age
- Complaints
- 0
- Recalls
- 9
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
2006 Hino NV8J recalls 9
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Hino is recalling 16,805 my 2005-2008 na6j, nb6j, nc6j, nd8j, ne8j, nj8j, and nv8j trucks. The two vertical right/left side front spring bracket bolts were not tightened properly during the assembly process. This may cause increased stress on the spring bracket which can lead to cracking of the bracket.
- The risk
- This could reduce steering control increasing the risk of a crash.
- The fix
- Dealers will replace the vertical front spring bracket attachment bolts on right/left hanger brackets and re-torque all associated bolts free of charge. The recall began on september 8, 2008. Owners may contact hino at 248-699-9300.
- The problem
- On certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. This can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
- The risk
- If the drive belt comes off, the alternator warning lamp will illuminate. If the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
- The fix
- Dealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. The recall began on april 25, 2007. Owners may contact hino motors at 248-648-6430. Note: this recall supersedes a previous campaign (please see 06v157).
- The problem
- On certain vehicles, during the stamping process, some crossmembers were manufactured with a deformation to the lower corners due to excessive wear of the stamping die. Over time, if this condition were ignored, the structural integrity of the crossmembers could be compromised which could result in a loss of braking ability, separation of the propeller shaft and/or a loss of rear warning lamps.
- The risk
- ANY OF THESE OCCURRENCES COULD RESULT IN A CRASH.
- The fix
- Dealers will inspect, correct, and replace the crossmembers. The recall began on december 4, 2006. Owners may contact hino at 1-248-648-6400.
- The problem
- On certain cab and chassis trucks that were transported to the selling location or body company using a decking system (vehicles stacked on the rear of the lead truck for transport), the air brake lines may be disconnected so that the braking systems can be tied together with the other vehicles. When these vehicles arrive at their destination, the air brake lines are reconnected. These reconnections were not always being tightened to the proper torque. Also, during this reconnection process, some of the abs wiring clips had been removed and not reinstalled.
- The risk
- Loose air brake lines can become disconnected or leak which could cause a decrease in braking ability or resulting in application of the parking brake without it being activated. This could result in a crash. Also if the drive shaft bolts are left loose, the drive shaft could become disengaged making the vehicle immovable. If the abs sensors are not secured properly using the correct clips, the abs sensors could go out of alignment.
- The fix
- Dealers will inspect the air brake lines, drive shaft bolts and abs sensor clips and tighten and repair if necessary. The recall began on september 15, 2006. Owners may contact hino at 1-248-648-6430.
- The problem
- On certain trucks, during assembly, the drag link attachment nuts at the pitman arm and steering arm may have been incorrectly torqued. Residual grease and paint which was applied as a rust inhibitor on the steering arm may have contributed to a loss of torque after assembly.
- The risk
- Increased wear for the draglink connections can occur creating a noticeable increase in the amount of steering wheel free play. If this condition was ignored, a loss of steering control of the vehicle could occur which could result in a crash.
- The fix
- Dealers will inspect the steering arm tightness and remove all grease and paint from the steering arms and retorque the draglink attachment nuts at the steering arm and pitman arm. The recall began on may 12, 2006. Owners may contact hino at 1-248-648-6430.
- The problem
- On certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. This can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
- The risk
- If the drive belt comes off, the alternator warning lamp will illuminate. If the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
- The fix
- Dealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. The recall began on may 2, 2006. Owners may contact hino motors at 248-648-6430. This campaign has been superseded - please see 07v208.
- The problem
- On certain trucks, the bolts that hold the battery box and bracket in place may not have been properly torqued at the time of assembly.
- The risk
- The battery box could become loose and possibly fall resulting in a crash without warning.
- The fix
- Dealers will inspect and retorqued all bolts. The recall began on october 27, 2005. Owners may contact hino at 248-648-6430.
- The problem
- On certain truck cab and chassis vehicles, a brake air line could become disconnected.
- The risk
- This could cause a decrease of braking ability or the parking brake to apply without being activated, increasing the risk of a crash.
- The fix
- Dealers will inspect each vehicle and check the torque on the nuts. If the nuts are not torqued properly, they will be tightened to the proper specification. The recall began on june 4, 2005. Owners may contact hino at 1-248-648-6400.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 2006 Hino NV8J yet
Hino NV8J: every year compared
All NV8J years2006 Hino NV8J vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2006 Hino NV8J | 0 | 9 | F | |
| 2006 Hino NA6J | 1 | 5 | F | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2006 Hino NV8J
Does the 2006 Hino NV8J have any recalls?
Yes - NHTSA lists 9 recalls for the 2006 Hino NV8J: cables (December 2012); front (April 2008); engine and engine cooling (May 2007); structure (December 2006) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 2006 Hino NV8J had?
None have been filed with NHTSA so far.
Is the 2006 Hino NV8J a reliable vehicle?
Its Safety Index is 23 out of 100 (grade F: far more problems than a typical Hino NV8J year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
What should I do if my 2006 Hino NV8J has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data