- The problem
- Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.
- The risk
- If the B+ circuit shorts to ground, it may lead to a fire.
- The fix
- Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
Vehicle safety record
2005 Hino NV8J Problems, complaints & recalls
No owner complaints about the 2005 Hino NV8J have been filed with NHTSA. It is covered by 10 recalls, the latest in December 2012 for the cables.
NHTSA data checked
FFar more problems than a typical NV8J year, for its age
- Complaints
- 0
- Recalls
- 10
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
2005 Hino NV8J recalls 10
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Hino is recalling 16,805 my 2005-2008 na6j, nb6j, nc6j, nd8j, ne8j, nj8j, and nv8j trucks. The two vertical right/left side front spring bracket bolts were not tightened properly during the assembly process. This may cause increased stress on the spring bracket which can lead to cracking of the bracket.
- The risk
- This could reduce steering control increasing the risk of a crash.
- The fix
- Dealers will replace the vertical front spring bracket attachment bolts on right/left hanger brackets and re-torque all associated bolts free of charge. The recall began on september 8, 2008. Owners may contact hino at 248-699-9300.
- The problem
- On certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. This can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
- The risk
- If the drive belt comes off, the alternator warning lamp will illuminate. If the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
- The fix
- Dealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. The recall began on april 25, 2007. Owners may contact hino motors at 248-648-6430. Note: this recall supersedes a previous campaign (please see 06v157).
- The problem
- On certain trucks, during assembly, the drag link attachment nuts at the pitman arm and steering arm may have been incorrectly torqued. Residual grease and paint which was applied as a rust inhibitor on the steering arm may have contributed to a loss of torque after assembly.
- The risk
- Increased wear for the draglink connections can occur creating a noticeable increase in the amount of steering wheel free play. If this condition was ignored, a loss of steering control of the vehicle could occur which could result in a crash.
- The fix
- Dealers will inspect the steering arm tightness and remove all grease and paint from the steering arms and retorque the draglink attachment nuts at the steering arm and pitman arm. The recall began on may 12, 2006. Owners may contact hino at 1-248-648-6430.
- The problem
- On certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. This can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
- The risk
- If the drive belt comes off, the alternator warning lamp will illuminate. If the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
- The fix
- Dealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. The recall began on may 2, 2006. Owners may contact hino motors at 248-648-6430. This campaign has been superseded - please see 07v208.
- The problem
- On certain truck cab and chassis vehicles, a brake air line could become disconnected.
- The risk
- This could cause a decrease of braking ability or the parking brake to apply without being activated, increasing the risk of a crash.
- The fix
- Dealers will inspect each vehicle and check the torque on the nuts. If the nuts are not torqued properly, they will be tightened to the proper specification. The recall began on june 4, 2005. Owners may contact hino at 1-248-648-6400.
- The problem
- On certain trucks, when the steering wheel is being turned, the dust cover may twine with the steering shaft and could result in the steering wheel operation becoming heavy.
- The risk
- Loss of steering control may occur, which could result in a crash.
- The fix
- Dealers will remove the old dust cover and install a newly designed cover. The recall began october 8, 2004. Owners should contact hino at 1-845-365-1400.
- The problem
- On certain cab and chassis trucks, when excessive force is applied to the accelerator pedal, beyond that required to achieve full acceleration, the pedal may become wedged between the floor panel and the carpet.
- The risk
- When this occurs, the accelerator pedal will become wedged in the full throttle position which could result in a crash without warning.
- The fix
- Dealers will inspect the accelerator pedal height to determine if it is within specifications. If either the pedal height or the accelerator rod is not within specifications, replace the accelerator assembly. In addition, a new bracket containing an accelerator pedal stopper will be installed. The recall began on september 8, 2004. Owners should contact hino customer service at 1-845-365-1400.
- The problem
- On certain trucks, the pinch bolt nut of the yoke connecting the steering gearbox and the steering wheel shaft backed out.
- The risk
- This could cause the yoke and the steering wheel shaft to separate which could result in loss of steering increasing the risk of a crash.
- The fix
- Dealers will inspect and retorque the pinch bolt nut as necessary. Owner notification began may 7, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact hino at 1-845-365-1400.
- The problem
- Certain trucks equipped with manual transmissions fail to comply with the requirements of federal motor vehicle safety standard no. 108, "Lamps, reflective devices, and associated equipment." A reverse backup switch may have been contaminated during the manufacturing process. The neutral safety switch may not allow the cruise control to engage.
- The risk
- This does not meet the requirements of the standard. Also, this could cause the cruise control not to be activated. The reverse backup light and buzzer stays on.
- The fix
- Dealers will replace the switches. Owner notification began on april 19, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact hino at 1-845-365-1400.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 2005 Hino NV8J yet
Hino NV8J: every year compared
All NV8J years2005 Hino NV8J vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2005 Hino NV8J | 0 | 10 | F | |
| 2005 Hino NC6J | 1 | 7 | F | Compare |
| 2005 Hino 145 | 1 | 0 | - | Compare |
| 2005 Hino 165 | 1 | 0 | - | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2005 Hino NV8J
Does the 2005 Hino NV8J have any recalls?
Yes - NHTSA lists 10 recalls for the 2005 Hino NV8J: cables (December 2012); front (April 2008); engine and engine cooling (May 2007); linkages (May 2006) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 2005 Hino NV8J had?
None have been filed with NHTSA so far.
Is the 2005 Hino NV8J a reliable vehicle?
Its Safety Index is 20 out of 100 (grade F: far more problems than a typical Hino NV8J year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
What should I do if my 2005 Hino NV8J has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data