- The problem
- Hyundai Motor America (Hyundai) is recalling certain 2019-2020 Elantra, 2019-2021 Kona and Veloster vehicles equipped with 2.0L Nu MPI engines. The piston oil rings may not have been properly heat-treated, which could result in engine damage.
- The risk
- A damaged engine may stall, increasing the risk of a crash. In addition, oil may leak onto hot exhaust components, increasing the risk of a fire.
- The fix
- Dealers will inspect and, if necessary, replace the engine, free of charge. In addition, Hyundai will deploy Piston Ring Noise Sensing System (PNSS) software. Owner notification letters were mailed August 24, 2021. Owners may contact Hyundai customer service at 1-855-371-9460.
Engine & cooling
2019 Hyundai Kona Engine problems
Owners have filed 144 complaints about the 2019 Hyundai Kona's engine & cooling with NHTSA - 73% of all its complaints, most recently on October 24, 2026. They describe 2 crashes, 3 fires and 1 injury. Stalling, loss of power, oil consumption, overheating, head gaskets, timing chains and engine failure.
- Complaints
- 144
- Recalls
- 1
- Crashes
- 2
- Fires
- 3
- Injuries
- 1
- Deaths
- 0
Engine recalls for the 2019 Hyundai Kona
Engine complaints
I have a 2019 Kona that has an issue with excessive oil consumption. I know that Hyundai issued a recall for this problem in 2019 Konas, but they claim my car isn't included in that recall, and they refuse to help me. It feels like a scam on Hyundai's part. my plate is: [[redacted]] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
My vehicle was brought into Kerry Hyundai of Alexandria in December 2025 and is still there. It was brought in for warranty work. The original complaint was oil consumption. It is supposedly getting a replacement engine but it has been 10 months of them giving me the run around. I feel this timeline is unreasonable.
My 2019 Hyundai Kona (VIN: [[redacted]]) experiences violent shaking and complete engine stalling in active traffic when braking, creating an immediate safety hazard on public roads. This directly mirrors the failure mechanics of Safety Recall 203 ([[redacted]]). Upon inspection, physical evidence of massive silver aluminum metal flakes was discovered clogging the VVT solenoid mesh screens, originating from internal cylinder/piston ring degradation. However, the dealership Universal Hyundai in [[redacted]] (RO#...
Read the full complaint
[redacted]) issued a fraudulent diagnostic report stating 'no metal found' to evade recall liability. Hyundai Motor America subsequently closed corporate case XXXwithout an internal engine or borescope inspection. I have retrieved the vehicle under financial protest and possess full photographic evidence of the aluminum contamination. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While driving my 2019 Hyundai Kona with the 2.0L engine, the engine suddenly began making a loud knocking sound. Immediately after exiting the highway onto a main street, the vehicle stalled in active traffic, causing a sudden loss of motive power and creating a significant safety hazard. The first Hyundai dealership documented an engine knock and reported diagnostic trouble codes P0011, P0014, P0017, and P0366, involving camshaft timing and correlation. I was subsequently informed that the engine had suffered a...
Read the full complaint
catastrophic internal failure. A second Hyundai dealership later diagnosed a connecting-rod bearing failure affecting Cylinder 2. My vehicle is covered by Hyundai Recall 203, which concerns defective piston oil rings that can lead to abnormal oil consumption, engine damage, and potentially engine stalling. The vehicle previously passed Hyundai's recall inspection/software procedure, but the engine has now experienced a catastrophic mechanical failure involving knocking and sudden stalling while driving. Hyundai has declined to replace the engine under the recall and has attributed the failure to an out-of-warranty maintenance/oil-related issue. I am also concerned about the reliability of the diagnostic process: the first dealership initially told me that a compression test had been performed and supported its conclusion about the engine failure, but later confirmed that no compression test had actually been performed. I am concerned that the prior recall remedy or inspection did not adequately identify or prevent the defect, and that an affected vehicle was allowed to remain in service until it suffered sudden engine failure and loss of motive power in traffic. I am requesting that NHTSA investigate whether this failure is related to Recall 203 and whether the recall remedy adequately protects owners whose vehicles initially passed the inspection but later experience engine damage, knocking, or stalling.
Large amounts of oil slipped past the damaged rings into the engine. Oil could not stay no matter how many oil changes and proper maintenance. Hard metal shards got loose into the engine causing the engine to blow. Many codes came up in the diagnoses done by a Hyundai dealership. This has been reported to be a common complaint and problem with this make and model/year of the car. It should not be my responsibility to fix. Its 100% a manufacturer error. Please assist me!
On September 11, 2026, while driving my 2019 Hyundai Kona Limited 1.6L Turbo on the highway, the vehicle suffered a sudden and dangerous loss of propulsion. The engine began vibrating violently, lost power significantly, and a strong chemical burning smell entered the cabin. I was forced to pull over immediately in traffic to avoid a catastrophic fire or highway collision. The vehicle had to be towed to McGrath Hyundai. The official dealership inspection (RO# 949326) confirmed severe internal manufacturing defects:...
Read the full complaint
cylinder wall scoring on cylinders 2, 3, and 4 due to premature piston ring wear, which caused massive oil fouling on the spark plugs and total ignition failure. This defect creates an immediate highway safety hazard and risk of engine fire due to oil entering the combustion chamber. Hyundai Motor America refuses to issue a safety recall for this 1.6L Gamma engine defect, leaving consumers driving unsafe vehicles with active loans.
The contact owns a 2019 Hyundai Kona. The contact stated that prior to purchasing the vehicle, the contact was informed that the vehicle had been previously repaired under recall. The contact stated that while driving approximately 25 - 35 MPH, and releasing the accelerator pedal, the vehicle independently accelerated. The contact stated that the dealer was contacted. The vehicle was taken to the dealer to be diagnosed, and it was determined that the engine needed to be replaced. The VIN was not included in NHTSA Campaign Number: 21V301000 (ENGINE). The failure mileage was 90,000.
I took my vehicle to a dealership for a recall and they refused to honor it. They made excuses and performed an unrelated service.
Vehicle starting using extreme amounts of oil, lose acceleration and stalling while driving and making klicking noises. All symptoms point to Hyundai recall 203 (NHTSA campaign number 21V301000). Dealer and manufacturer refuse to fix it, citing lack of extended warranty and high mileage, as well as insist of oil consumption test that would require me to drive the vehicle for another 1000 miles for them to be able to determine the oil consumption. Because I don't fee it is safe to drive the vehicle, I declined the test, but was willing to allow the dealer's service employees to drive it. They refused. I ended up donating the vehicle to Kars for Kids and notified them about the situation.
My 2019 Hyundai Kona SE (2.0L Nu MPI/Atkinson engine) was previously subject to NHTSA Recall 21V301000 (Hyundai Recall 203) for defective piston oil rings that can chip and cause accelerated oil consumption, engine knocking, and stalling. That recall's remedy was performed under a prior owner in December 2021. In November 2025, a Hyundai dealership installed a Cylinder Noise Diagnostic System (CNDS) software update (Service Campaign 974) specifically meant to detect this defect's vibration signature before it...
Read the full complaint
causes engine damage. Approximately 7,000-8,000 miles and about nine months after that software update, the vehicle stalled unexpectedly while being driven on two separate occasions, with no check-engine light or other warning beforehand. A third stall left the vehicle unable to restart. It was towed to a service station, which found no engine oil and no external leak. A Hyundai dealership subsequently diagnosed cracked valves that allowed approximately 5 quarts of oil to burn through the engine, and determined the engine requires complete replacement. This is the same failure mode (oil consumption/engine damage leading to stalling) that the original recall and the 2025 software update were both meant to prevent, and the software gave no advance warning before the stalling occurred. The vehicle and dealership diagnosis are available for inspection upon request.
The contact's daughter owns a 2019 Hyundai Kona. The contact stated that while her daughter was driving 40 MPH, smoke started coming from under the hood. The vehicle lost power and came to a stop in front of a convenience store, blocking the entrance. Several unknown warning lights were illuminated. The driver called the Fire Department, and it was confirmed that the engine compartment displayed severe heating damage. There was no fire. The firemen on the scene recommended that the vehicle be towed. The vehicle was...
Read the full complaint
towed to an independent mechanic, and the contact was informed that the failure was a known failure and might be covered under an extended warranty program. The vehicle was towed to the dealer, where it was diagnosed and determined that the engine had seized. No electrical failure was found. The dealer initially offered to cover 95% of the cost of the repair. The manufacturer was notified of the failure and offered to cover 85% of the cost of the repair, but the contact declined. The contact stated that the Knock Sensor Detection System (KSDS) software update had previously been completed on the vehicle; however, the update failed to prevent the engine failure. The manufacturer informed the contact that the extended warranty could not be applied due to a transfer of ownership to the contact's daughter. The failure mileage was approximately 81,000.
The engine was spewing oil into the air filter and also out of a hose near the turbo. It was also consuming high amounts of oil, yes its available for inspection. I was driving on a busy public highway and my car lost power and would not accelerate no the problem has not been confirmed as of yet vehicle has not received official inspection yet there was zero warning lamps, messages, or any indicator of any kind that there was a problem. there still isnt
The vehicle suffered a sudden, severe loss of power while driving, causing the engine to stall unexpectedly. This created an immediate hazard to myself and other motorists on the road, as I was forced to navigate a dead vehicle out of active traffic without power steering or power braking assist. Prior to the total failure, the engine exhibited severe mechanical knocking, loss of acceleration, and high oil consumption without any visible external oil leaks. This engine failure is a direct result of the...
Read the full complaint
manufacturing defect detailed in NHTSA Safety Recall 203 (NHTSA Campaign 21V301000) concerning improperly heat-treated piston oil rings that cause severe cylinder scuffing and engine stall. Although the software update (Campaign 974) was previously completed on this VIN, the physical defect was never mechanically repaired. The software update failed to prevent the physical, defectively manufactured components from destroying the engine. Hyundai is refusing to honor the safety campaign and replace the failed engine because the recall database incorrectly lists the recall status as "completed."
My 2019 Hyundai Kona has been burning oil, I've done great upkeep on it, including topping the oil off in between services. This is because it obviously has been burning oil, well recently it started stalling, then starting/turning it over has been acting up. The RPM's have not been stable at all an I've ran two diagnostic test on it, they came back as a "camshaft error" I can't remember the exact code at the moment. However the mechanics I have questioned said it's probably from the oil pressure being messed up...
Read the full complaint
from the oil burning up. Whether it be the sensor not regulating properly or the engine itself not getting enough lubricant. I have heard from others with Hyundais an it's not just Kona's, people are saying they burn through their oil fairly quickly compared to other cars they've had. With that being said, the car now stalls in traffic and the check engine light came on finally, that's when we first ran diagnostics. Which I have had diagnostics ran at one place I go to for oil changes, a one at a Meineke, and soon to be a third at Autozone because I need to get the exact code again. I'm worried because my mom an I have been sharing this vehicle and the stalling makes it dangerous, it can be put in neutral and restarted but I have a service appointment with a dealership to see what they can do, however I feel this is happening from something caused straight from the manufacturer, not improper care or overuse. So I'm filing a complaint because if you stall while crossing traffic and could not restart, or know how to restart it, you could get in a wreck. This all seemed to start happening as well right after the vehicle rolled over 100,000 miles, go figure right? An if you needed to inspect this happening it would not be hard to do, all you would have to do is turn over the engine, then drive it for a bit an it will eventually stall, an you could also see the RPM's bouncing and the noises it makes.
The contact owns a 2019 Hyundai Kona. The contact stated that the vehicle had experienced excessive oil consumption. The contact stated that while driving 70 MPH on the highway, the vehicle stalled. The contact was unable to pull over to the side of the road. The contact was able to restart the vehicle and continued driving. The contact stated that the failure recurred while driving into a parking lot. The battery warning light illuminated on several occasions. Additionally, the contact stated that the check engine...
Read the full complaint
and low oil pressure warning lights were intermittently illuminated. The vehicle was taken to Auto Zone and to an independent mechanic, where it was diagnosed and determined that the piston oil ring failure had caused low oil pressure, which resulted in the timing failure. The failure was related to NHTSA Campaign Number: 21V301000 (ENGINE). The dealer and the manufacturer were notified of the failure but denied a loaner vehicle or towing assistance to the dealer located 75 miles away. The vehicle was not repaired. The failure mileage was approximately 113,000.
The contact owns a 2019 Hyundai Kona. The contact stated that while driving on several occasions at various speeds, the AWD warning light illuminated and was reset each time the vehicle was restarted. The contact also stated that over a couple of months, while downshifting, stopping, or decelerating, the vehicle stalled on several occasions. Additionally, the contact stated that while driving at approximately 30 MPH, the Check Engine warning light illuminated. The vehicle was then taken to an AutoZone, where a...
Read the full complaint
handheld diagnostic machine retrieved diagnostic trouble codes: P0017 (crankshaft) and P0171 (system too lean), and it was observed that the oil reservoir was empty. Two quarts of oil were added to the vehicle. The contact stated that after being serviced, the vehicle was idling high and stalled while driving at unknown speeds on several occasions. The vehicle was taken to a dealer, where it was diagnosed with a sheared timing pin, and it was determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 100,000.
The contact owns a 2019 Hyundai Kona. The contact stated that while making left turns on several occasions, the vehicle stalled. The vehicle was shifted into park (P) and restarted. The vehicle was not diagnosed or repaired. However, during routine maintenance, an independent mechanic noticed that the oil reservoir was empty, and an oil change was completed. The manufacturer was notified of the failure. The failure mileage was approximately 105,000.
Vehicle (2019 Kona) is subject to Recall 203 (piston ring/bore defect). On [redacted] Puente Hills Hyundai refused the mandatory physcial inspection, instead attempting to charge $1,100 for 'leak repairs.' An independent inspection by Valvoline on [redacted] confirmed the engine is dry with no leaks, proving the dealer's claim was fraudulent. Following a recent ECU update, the vehicle triggered a P0420 code - a known symptom of the internal engine damage covered by Recall 203. My Hyundai Corporate Case (#[redacted])...
Read the full complaint
is currently stalled as the dealer refuses to provide technician notes or perform the safety inspection. I am operating an unsafe vehicle with documented internal mechanical failure. Requesting immediate intervention for a physical cylinder inspection. Please refer to the attached document (SUMMARY OF EVENTS) for the full chronology, supporting evidence, and email correspondence related to the dealership's refusal to perform Recall 203. See attached PDF (Evidence_Email_Correspondence) for documentation of the dealership's refusal to provide technician notes and their unprofessional communication regarding this safety recall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Hyundai Kona. The contact observed excessive oil consumption, which has progressively caused the vehicle to stall 2 to 3 times per week. While the engine can be restarted, it idles and runs roughly immediately afterward. Additionally, the contact noted a distinct smell of burning oil exiting from the exhaust system. The contact referenced NHTSA Campaign Number: 21V301000 (ENGINE) however, the VIN was not included in the recall repair. The vehicle was taken to a independent mechanic where it was diagnosed to have excessive oil consumption. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 78,000.
The contact owns a 2019 HYUNDAI Kona. The contact stated while driving the vehicle at an undisclosed speed, he noticed he had an engine knock, and noticed that the engine was consuming a good amount of oil with no warning lights or oil leaks. The contact pulled over to the side when the knock started and noticed the vehicle was starving of oil although a recent oil change shows it was recent. The vehicle was taken to a dealer where it was diagnosed to have poor service, and engine sludge although dealer stated there was none. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 120,132.
96,247 mi Engine knock and complete oil loss within 3,000 miles of last oil change Symptoms consistent with NHTSA Recall 21V301 (Hyundai Recall 203) and Warranty Extension TXXM coverage
Vehicle frequently and quietly stalls while driving in active traffic, creating an immediate safety hazard. Vehicle is a 2019 Kona with the 2.0L Nu MPI engine, which is the exact subject of NHTSA Safety Recall 21V301 (Recall 209). Hyundai Motor America (Case #42541672) is actively refusing to honor or inspect the vehicle under the safety recall mandates, claiming a lack of dealership service history overrides a federal safety defect.
Engine blew a head gasket so had to have the engine rebuilt @ a cost of $13,000. Car only had 22,500 miles on it. I think that should instigate a recall.
The vehicle burns oil faster and the vehicle began to stall at highway speeds. Upon further research, a campaign recall for the same vehicle is open but only for specific VIN. Although this vehicle was not part of the recall campaign 21V301000 the vehicle shows issues aligned with the recall.
Last week just driving to school, my engine started to knock. So the next day we take it to a local mechanic shop and it exploded while they were test driving it and they diagnosed it with rod bearing failure. So I contact Hyundai and get it towed to the Hyundai dealership for them to inspect it and eventually do an engine swap, but after it got dropped off I was told it'd be $360 to get it diagnosed and filed and they said that I have no warranty. I explained to the rep that the class action lawsuit regarding the...
Read the full complaint
Theta 2 GDI engines extends the warranty to 15 years/150,000 miles for all subsequent owners especially since I've had the KSDS installed. They're refusing to cover damages even though my car was affected by a manufacturing issue on their end and was part of major recall campaigns. My car failed at 94,000 miles while up to date on services and the representative was recommending I ask Hyundai for "good-will funding" but I don't need their "good will" I need them to make the situation right and cover all my expenses related to my blown engine
Hyundai Kona engine complaints by year
Kona engine problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data