- The problem
- Chrysler (FCA US), LLC is recalling certain 2022-2023 Jeep Wrangler and Gladiator vehicles equipped with a manual transmission. The rearview camera may fail to display the rearview image and the reverse lights may not illuminate when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
- The risk
- A disabled rearview image can decrease the driver's visibility of the rear view, and disabled reverse lights may not alert others that the vehicle is reversing, increasing the risk of injury or crash.
- The fix
- Dealers will replace the gear position sensor, free of charge. Owner notification letters were mailed November 16, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 92A.
Transmission & drivetrain
2023 Jeep Gladiator Transmission problems
Owners have filed 8 complaints about the 2023 Jeep Gladiator's transmission & drivetrain with NHTSA - 14% of all its complaints, most recently on June 24, 2026. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
- Complaints
- 8
- Recalls
- 2
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Transmission recalls for the 2023 Jeep Gladiator
- The problem
- Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- The risk
- Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- The fix
- Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.
Transmission complaints
The vehicle does not have linerar acceperation. At times from a start, cold or warn engine, the vehicle will abruptly accelerate harder than the gas pedal was pressed. at light throttle, the vehicle will surge, shutter or chug. Erattic acceperation. after the engine replacement for a connecting rod bearing failure, the engine was running rough, poor mileage and stalled on a wet and cold morning (32degrees, raining). The stall happened on the deaccel lane of the interstate 25 (65 mph). THe dealership replaced one injector and said the problem was fixed. But it is not. Vehicle has not stalled, but we have not had the cold/wet weather.
Vehicle has been in the shop at 17,000 miles and had a complete transfer case, front and rear output shafts and rear Danna 44 (Max Tow) replaced in November of 2025. In June of 2025 vehicle has been in another shop for the same issues that occurred before these driveline repairs for three weeks now. Shop can not diagnose issues after three weeks. A star report has been made and Jeep is sending a technician to diagnose.
I used the 4 wheel drive and received message that clutch was hot, then received message to service transmission. Vehicle went into limp mode. Drove at speeds of 35 to 40 miles an hour. 50 miles an hour down hill. Had to drive access roads because [[redacted]] traffic is 75 miles per hour. Several times speed was even slower. Took it to brown dodge in Devine. The reset system and said I could not use 4x4. Referenced star code s2521000001. I took vehicle in 7/13/25. I wonder if they even...
Read the full complaint
previously preformed recall 19a clutch on This manual transmission. Purchased Mojave Jan/2023, recalled received 4/23. Recall repaired 6/24. On 15000 miles on it and the first time I use 4x4 the vehicle became useless and barely able to move. I wonder if software upgrade for 19a really fixed the 19a issue or just was a bandage to buy more time. I have purchased several Chrysler products and the manufacturer lack of addressing the issues is concerning. I'm [[redacted]] this is the first time I had to file a complaint. Not knowing when they will address the problem on a vehicle I purchased to enjoy my retirement is sad INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The vehicle was being driven on a 4 mile stretch of interstate 26 averaging between 65 and 70 MPH. On the steepest section of the grade the vehicle downshifted into 7th gear and began to lose power. It showed a check engine light and other codes which are attached. I was able to safely pull over to the shoulder but the vehicle lacked power and pulling over and maneuvering on a steep grade was precarious. I received an alert from the Jeep mobile app on my phone shortly after instructing me to take my car to...
Read the full complaint
schedule an appointment now. I was able to use a scanner application JScan to clear the code and was able to return home without further incident. I investigated the code that was provided by JScan "P00AF" and discovered that numerous owners had experienced the same situation across all lines of vehicles that use the Gen 3 Ecodiesel. I counted 37 separate reports while using Google in 15 minutes of searching. This is a serious safety issue as I was traveling at interstate speeds uphill and went from 65-70 mph down to a slow rate of travel in a matter of seconds and to my knowledge no brake lights illuminated as cars were changing lanes behind me rapidly due to my sudden decrease in speed. It appears likely to be a programming or electrical malfunction with the turbo wastegate actuator and corresponding sensors that is not indicative of an actual turbo or wastegate actuator failure. If the computer algorithm is using barometric pressure for pairing boost set point and actual boost based on residual data that is not updated in real time, when ascending steep grades and gaining hundreds of feet in elevation over a short duration, air pressure values could potentially be skewed resulting in a mismatch in actual versus expected turbo boost output. My vehicle had only been running for 12-14 minutes as I live at the base of a large mountain and left home and began my ascent within 10 minutes. Therefore my oil and engine temperature were not elevated.
The contact owns a 2023 Jeep Gladiator. The contact stated that the vehicle was repaired under an unknown recall by the previous owner; however, the check engine warning light illuminated. The contact examined the vehicle and became aware of some loosened fasteners. The vehicle was taken to a local dealer where it was diagnosed that there were defective parts associated with NHTSA Campaign Number: 23V116000 (Power Train). The vehicle was not repaired due to parts being on backorder. The contact stated the fuel...
Read the full complaint
casket, canister purge valve, and fender liner had previously been replaced. The contact was not provided documentation of any repairs that were performed. The manufacturer was not made aware of the failure. The failure mileage was approximately 300.
The contact owns a 2023 Jeep Gladiator. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available. The consumer stated that the safety recall repair has been completed.
The contact owns a 2023 Jeep Gladiator. The contact received notification of NHTSA Campaign Number: 23V116000 (Power Train) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
Was driving and my vehicle came up and said I had an issue with the electrical power steering assist system and was going to shut off. I was waiting at a red light the vehicle put itself in park and shut down. I restarted the vehicle and it would not move out of park or any of the windows or radio controls would function. I upon restarting four more times was able to get it back into drive and return home. The steering functioned fine but the radio, back up camera, aux power port, and windows still do not work. ...
Read the full complaint
Once I returned home this seems to be a reoccuring problem on the Gladiator and Jeep Wrangler platforms. Seems these vehicle throw either one of two codes which I am not sure which mine is but considering the light is out for check engine I am going to say I have the P0563 error and not the P0562 which from what I am reading leaves the light on in most instances. My vehicle has 1803 miles on it and was purchased the first week of April 2023.
Jeep Gladiator transmission complaints by year
Gladiator transmission problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data