- The problem
- Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."
- The risk
- An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.
- The fix
- Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.
Electrical system
2019 Jeep Wrangler Electrical problems
Owners have filed 153 complaints about the 2019 Jeep Wrangler's electrical system with NHTSA - 20% of all its complaints, most recently on November 3, 2026. They describe 3 crashes, 3 fires and 2 injuries. Dead batteries, warning lights, wiring, alternators, infotainment and electronic module failures.
- Complaints
- 153
- Recalls
- 1
- Crashes
- 3
- Fires
- 3
- Injuries
- 2
- Deaths
- 0
Electrical recalls for the 2019 Jeep Wrangler
Electrical complaints
My 2019 Jeep Wrangler JL has developed a severe, recurring electrical malfunction that causes multiple vehicle systems to fail simultaneously, resulting in unexpected loss of propulsion and the vehicle automatically shifting into Park without driver input. The issue initially began with an intermittent "Service Shifter" warning, particularly when driving over bumps or braking. At first, the vehicle continued operating normally. After several weeks, the problem progressively worsened. Now, numerous dashboard...
Read the full complaint
warning lights illuminate simultaneously, including the battery, oil pressure, and brake indicators. The speedometer fluctuates erratically, and warnings such as "Service Electronic Stability Control" appear. The vehicle begins jerking, slowing down unexpectedly, and eventually loses propulsion. It may initially continue moving, but the malfunction progresses until the vehicle shifts into Park without my input, preventing further operation. During one extremely dangerous incident, the vehicle malfunctioned and became disabled in the fast lane of [[redacted]], leaving me stranded in active highway traffic. I discovered that physically pressing down on electrical components connected to the dashboard fuse box sometimes temporarily restores normal operation after restarting the vehicle. However, the malfunction continues to recur and has become increasingly frequent. My VIN shows no outstanding safety recalls, but I am concerned about a potential electrical, wiring, power distribution, or electronic communication defect. The exact cause has not been diagnosed. I have video evidence of the dashboard malfunction and warning messages. I am requesting an investigation because this unpredictable failure creates a serious collision risk, particularly at highway speeds. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
voltage regulator chip failure can cause the engine to stall or fail to start completely. Interior dashboard lights and dome lights along w/ windshield wipers going off without prompted happen after vehicle shutoff. Had to jump it to begin to start at times. Similar to recall U87.
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving approximately 40 MPH, the instrument panel cluster suddenly went black. The contact pulled to the side of the road and waited for a family member to follow closely behind to ensure a safe drive, as essential driving information was no longer visible. The vehicle was taken to the dealer, where it was diagnosed that the instrument panel cluster had failed and required a complete assembly replacement. The vehicle was pending repair. The...
Read the full complaint
contact learned of NHTSA Campaign Number: 24V652000 (Electrical System); however, the vehicle was not covered under the recall because the VIN was not included. The manufacturer was notified and confirmed that the VIN was not included in the recall. The failure mileage was approximately 81,000.
While driving my 2019 Jeep Wrangler, the vehicle suffered a major electronic/CAN-network failure. Service Shifter, ABS and ESC warnings appeared, the wipers activated on their own, controls malfunctioned, and power-steering assistance failed while the vehicle was moving, making it extremely difficult to steer. My two young children were in the vehicle. Jeep dealer diagnostics showed widespread communication faults involving steering, ABS/brake, transmission and other control modules. The dealer replaced the...
Read the full complaint
power-steering assembly and RF Hub, but the problem remains. On the first drive after repair, the ABS and ESC warnings repeatedly flashed on and off at highway speed. Interior lights are also flickering. I am concerned another network failure could again disable steering assistance or compromise ABS/braking-related safety systems and cause loss of vehicle control or a crash.
Vehicle went into dealer for diagnostic, update PCM for hill start assist and cruise control failure. Dealer identified pcm update was not done when clutch recall performed. Instrument cluster update was pushed as well. Instrument cluster bricked. headlight indicator only functioning light on cluster. All gauges and information screen are dark. no functionality. Car has been sitting at the dealership since July 1, 2026 waiting on a replacement instrument cluster.
2019 Jeep Wrangler JLU experienced intermittent CAN-C communication failure. Vehicle has repeatedly experienced simultaneous loss of multiple electronic systems. On September 7th 2026, while driving, vehicle unexpectedly lost electric power steering, windshield wipers activated without command, ABS/TPMS/ESC warning lights illuminated, and vehicle subsequently would not shift into gear after stopping at a traffic light. Hazard lights would not activate. After shutting vehicle off, vehicle would not enter ACC or...
Read the full complaint
restart normally. Opening driver's door unexpectedly caused vehicle to enter ACC. Manipulating the CAN-bus wiring/STAR connector behind the glove box has historically temporarily restored normal operation. Vehicle has previously required repair to this wiring/connector, and the failure has recurred. This has been occurring for at least 3 years and since 60,000 miles. This presents a significant safety hazard because steering assistance, shifting/propulsion, and signaling were simultaneously affected while driving. It is a known Chrysler issue (FCA STAR Case S2108000146) and should be recalled as there is a CLEAR and present danger with this ongoing issue.
The IPC Cluster completely blank. Unsafe to operate vehicle, as speed was unknown, unable to read fuel gauges, and unable to see any warning lights. Experienced the exact problem noted in Recall Campaign 30B/NHTSA 24-V 652 for jeeps with the 3.5 inch cluster layout, and my VIN is not listed on the recall list.
Check engine, ABS, Service Shifter suddenly pops up and the steering was hard to turn almost had an accident
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel was blank. The vehicle was taken to the dealer and was diagnosed with instrument cluster failure. The contact was informed that the instrument cluster needed to be replaced. The vehicle was awaiting the repair. The manufacturer was notified of the failure and referenced NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The failure mileage was unknown.
The 3.5-inch Instrument Panel Cluster went completely black while operating the vehicle, causing a total loss of speedometer and critical safety indicators (violating FMVSS 101). Concurrently, the engine computer limited vehicle performance to 3,000 RPM (limp mode). The vehicle exhibits the exact failure mode detailed in NHTSA Campaign 24V-652 (Jeep Recall 30B), but the manufacturer has not yet added this VIN to the recall population.
Instrument panel cluster has malfunctioned. Spedometer, tachometer, odometer, fuel guage, oil temperature, tire pressuer, and several other dashboard displays both analog and digital are not functional. The instruments on the dashboard have gone blank and do not provide a reading when the car is powered on. As a consequence of the instrument panel cluster failure, I am unable to see my exact speed, potential vehicle warning indications, and fuel levels while operating the vehicle putting the safety of myself and...
Read the full complaint
others at risk. The vehichle has a history of dealership and mechanic inspections. No warning lamps, messages, or other symptoms were evident prior to the failure of the instrument panel cluster.
Instrument panel cluster failing making it difficult to determine mph, fuel in vehicle, mileage, etc. panel was flashing and blacking out while driving creating a distraction, photos could not be obtained during worst of incident because actively driving.
Instrument panel cluster failure in my 2019 jeep wrangler unlimted sport. instrument panel cluster +9 Stellantis (Jeep) recalled certain 2019 Jeep Wranglers (Campaign 24V-652 or Recall #30B) because their 3.5-inch instrument panel clusters can short-circuit and go completely dark. This causes you to lose your speedometer and critical warning lights, increasing crash risks. Dealers replacement . Thing is none of all 4 are honoring this recall. Im having the same issues as this recall. FCA,...
Read the full complaint
NHTSA, CHRYSLER/JEEP, STELLANTIS. ALL 4 i have called even made a complaint and all i get is so rry cant help you cause my vin number is not on the recall yet having the same recall issues. And i have to drive back to [[redacted]] tomorrow from [[redacted]] i pray that i dont get into any accident INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The contact pulled over and waited for several minutes before restarting the vehicle. The vehicle was taken to the dealer, who replaced the wiring harness, but the failure persisted with the speedometer and fuel gauge fluctuating and the instrument panel icons flashing. Additionally, the vehicle was jerking and experienced a loss of power steering assist while driving. The vehicle was...
Read the full complaint
jumpstarted. The vehicle was taken back to the dealer; however, the vehicle was not yet diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 82,000.
The contact owns a 2019 Jeep Wrangler. The contact stated that the horn was inoperable. The contact attempted to depress the horn on several occasions, but the horn failed to operate. The contact's husband attempted to depress the horn, and the horn failed to operate. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.
Went to start the jeep and the entire dash cluster was out. I had just gotten it serviced 2 days before it went out and there was no warning or indication that the cluster panel was damaged. Due to this issue I'm unable to see any speed, gas levels, signaling, oil level and any other signal indicators from the dash. This is extremely problematic and renders the vehicle unsafe to drive. It was inspected by the dealership and another mechanic and both parties confirmed the dash cluster was broken and needed to be replaced and that several other 2019-2020 jeep wranglers had been brought in with the same problem.
The 48V eTorque Power Pack Unit (PPU), BPCM, and associated cables failed on my 2019 Jeep Wrangler, causing the vehicle to stall and lose all acceleration while driving on the highway. All components are available for inspection upon request. In June 2025, a non-Jeep service center identified stored diagnostic code P0A9C-00 (48V hybrid battery temperature sensor circuit performance failure) along with multiple low voltage codes in the power steering system. The technician noted the issue needed to be addressed by...
Read the full complaint
an authorized Jeep dealer, as there was insufficient information to perform a repair on the 48V hybrid system. In September 2025, while driving on the highway, the engine stalled and the vehicle completely lost acceleration and would not restart. The vehicle required towing to an authorized Jeep dealer. A sudden and unexpected loss of acceleration and engine stall on a highway creates an extreme risk of rear-end collision and potential serious injury or fatality to the driver and other motorists. The problem was confirmed by an authorized FCA/Jeep dealer who found the same diagnostic code P0A9C-00, along with corrosion buildup on the 48V connector pins and BPCM pins. Two separate FCA STAR cases were opened by the dealer. The Power Pack Unit Battery was identified as the failed component. The dealer confirmed that the 48V cables required for repair are currently unavailable through Chrysler under any parts specifier, meaning FCA cannot supply the necessary parts to remedy this known defect. The vehicle has been inspected by an authorized FCA dealer on two separate occasions nine months apart, with the defect remaining unresolved on both visits due to FCA parts unavailability. Warning symptoms including low voltage codes and the P0A9C-00 fault code were first identified in June 2025, approximately three months before the highway stall event, indicating this was a progressive and worsening defect. The issue was first reported in June 2025 and remains unrepair
My speedometer blacked out couldnt see the fuel gage or speedometer. Light flickering, auto park engages, steering wheel locks up.
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel became inoperable. The contact stated that the instrument cluster began to dim and subsequently went completely blank. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 112,000.
The center cluster instrument panel went completely black. This affects seeing any warning lights, tire pressure, speedometer, mileage, fuel amount, etc. The problem has been confirmed by auto shops. No way to fix except replacing the entire thing and my VIN has not been included in any recalls.
What component or system failed or malfunctioned, and is it available for inspection upon request? After diagnostics of multiple 'no communication' codes, it was determined that the CAN buss star connector was faulty. The part has been replaced, but is available for inspection. How was your safety or the safety of others put at risk? The malfunction caused repeated warning lights and loss of steering at unpredictable times. Luckily I was always able to put on my hazard lights and get out of the path of traffic. Has...
Read the full complaint
the problem been reproduced or confirmed by a dealer or independent service center? Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes, a variety of warning lamps and messages over a period of 10-12 days, which would disappear after restarting the vehicle (restarting was necessary to get the steering working again). Messages such as traction control, auto on/off, and check engine light were a few different ones. They came and went so quickly it was hard to catch them all while I was focused on getting safely off the road.
heated steering wheel connector melted inside sccm. Repairs needed are a new wiring harness and sccm. Vehicle went up in smoke
Jeep engine stopped running while driving on high way 20.Had to coast to stop in middle of side street.Jeep did start back up but would not go into drive until an hour of trying to get it into gear.Drove it home.Next morning I started jeep but would not go into drive.It was stuck in park.
I was driving my 2019 Jeep Wrangler Unlimited Sahara 2.0T/AT to the gym with my spouse. No Check Engine Light, Jeep Temps were perfect. All gauges operated as it should, so there was no sign of trouble. The vehicle was OFF. We parked and walked into the gym and then into the 1 set of exercises, Someone yelled in the gym that someone's truck was on fire. We ran outside and Lo and Behold it was our Jeep. The Engine Compartment Was totally Destroyed. Please Look At the Pictures for Reference.
The contact owns a 2019 Jeep Wrangler. The contact stated that while starting the vehicle, the instrument panel became inoperable, turning on and then shutting off. The contact stated that while driving, the instrument panel was blank. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the instrument cluster had failed and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 103,000.
Jeep Wrangler electrical complaints by year
Wrangler electrical problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data