Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2008 Kenworth T660 Problems, complaints & recalls

Owners have filed 2 complaints about the 2008 Kenworth T660 with NHTSA, most often about the engine & cooling (2) and the electrical system (1). Those complaints describe 1 crash and 1 fire. It is covered by 14 recalls, the latest in April 2020 for the electronic stability control (ESC). For comparison, the 2007 has 0 and the 2009 has 0.

NHTSA data checked

DMore problems than a typical T660 year, for its age

#370 most complained-about 2008 vehicle

Complaints
2
Recalls
14
Crashes
1
Fires
1
Injuries
0
Deaths
0

Most common 2008 Kenworth T660 problems

Share of all 2 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2008 Kenworth T660 recalls 14

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Electronic stability control (ESC)

20V199000460,515 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
The risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
The fix
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Engine and engine cooling

11V2030005,831 vehicles affected

The problem
Paccar is recalling certain model year 2007-2011 kenworth c500, t2000, t600, and t660, as well as model year 2009-2011 peterbilt 387 and 388 trucks equipped with caterpillar c15 engine and manufactured from may 11, 2006, through september 17, 2010. Degradation of a combustion tube weld can cause radial heat impingement on the body which may burn through certain bodies used on c15 engines.
The risk
THIS COULD RESULT IN A FIRE.
The fix
Caterpillar is handling the owner notification and remedy for this campaign. Please see caterpillar's defect report 11e-006. Caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. This service will be performed free of charge. Due to a parts supply issue, owners will be notified by the end of april 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late july 2011. Owners may contact caterpillar toll-free at 1-800-447-4986.

Fuel system: tank assembly

11V1270004,664 vehicles affected

The problem
Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.
The risk
The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
The fix
Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to begin during march 2011. Owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

Power train: axle assembly

10V63400012,873 vehicles affected

The problem
Paccar is recalling certain model year 2007-2008 kenworth and peterbilt vehicles manufactured from february 2, 2006 through april 30, 2007. The bearing surfaces of the extended lube universal joint that attaches the inter-axle driveline to the drive axle may become prematurely worn due to breakdown of lubrication and/or excessive heat. Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding. This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle.
The risk
Detachment of the driveline from the axle may cause the vehicle to lose power and become disabled in the roadway. Also, the driveline could drop from the vehicle into the roadway increasing the risk of a crash.
The fix
Paccar is working with its supplier to remedy the vehicles free of charge. The safety recall is expected to begin during february 2011. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

Steering: column

10V3080009,697 vehicles affected

The problem
Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.
The risk
A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.
The fix
Dealers will inspect the steering shaft using a weld placement gauge provided by trw. Any steering shaft found to have been welded improperly will be replaced free of charge. The safety recall began on july 30, 2010. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

Service brakes

09V2390003,423 vehicles affected

The problem
Kenworth is recalling 3,423 my 2004-2009 t2000, t800,t600, w900 and t660 vehicles. Increased brake excitation in a certain vehicle configuration which includes bendix drum brakes, wide base low profile single tires, and an ag400 or ag460 rear suspension, due to its unique brake clocking and cam tube length, can cause fatigue and cracking to brake assembly components.
The risk
Cracking can cause a complete fracture of the cam tube, which could increase stopping distance and decrease parking brake hold capability.
The fix
Dealers will inspect the rear axle brakes assembly, replace cracked rear axle brakes assembly components where required, and install cam tube support brackets on all rear axle wheel ends free of charge. The recall is expected to begin or before july 25, 2009. Owner may contact kenworth at 1-425-828-5440.

Service brakes: disc

09V166000140 vehicles affected

The problem
Paccar is recalling 140 my 2005, 2007-2009 t800, w900, and t660 trucks. The caliper mounting fasteners attaching the air disc brake caliper assembly to the torque plate may have received insufficient torque during the installation process. The insufficient torque may allow the air disc brake caliper assembly to become loose and possibly separate from the vehicle.
The risk
This could result in reduced braking capacity and also a road debris hazard, increasing the risk of a crash.
The fix
Dealers will inspect air disc brake caliper assemblies and replace the caliper mounting fasteners and torque properly. This service will be performed free of charge. The manufacturer has not yet provided an owner notification schedule. Owners may contact kenworth at 1-425-828-5440.

Suspension

08V485000130 vehicles affected

The problem
Paccar is recalling 130 my 2004-2009 t2000, t800, t600, w900 and t660 kenworth trucks built with an ag400 rear suspension, long stroke brake chambers, and wide base tires (super singles). These vehicles may develop an increase in lateral and vertical axle movement. This movement may cause part or parts of the brake assembly (brake cam tube support, brake chamber bracket, brake chamber, brake spider) to develop fatigue cracks, possibly resulting in the failure of the part or parts within the brake assembly.
The risk
A failure may reduce vehicle brake performance, increasing the risk of a crash.
The fix
Dealers will install the cam tube support brackets on all of the rear axle wheel ends. Inspect the rear axle brake assembly and replace it if cracked. The recall is expected to begin during november 2008. Owners may contact kenworth at 1-425-828-5440.

Engine and engine cooling: diesel

08V4870004,883 vehicles affected

The problem
Paccar is recalling 4,883 my 2006-2009 kenworth t600, t660, t800, w900, t2000 and my 2008-2009 peterbilt 365, 367, 379, 384, 386, 387, 388 and 389 trucks. Inadequate stiffness of the diesel particulate filter (dpf) bracket could result in separation of the dpf from the chassis.
The risk
A vehicle crash could occur if another vehicle strikes the dpf on the roadway.
The fix
Paccar is working with caterpillar to repair these vehicles (please see 08e041). Owners may contact caterpillar at 1-800-447-4986 or kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.

Parking brake: air

08V1280001,043 vehicles affected

The problem
Paccar is recalling 1,043 my 2008-2009 kenworth c500, t2000,t660, t800 and w900 trucks equipped with bendix mv-3 dash control valves. The molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. This condition can allow the rubber double check valve to become lodged in the body opening under certain circumstances.
The risk
If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged double check valve thereby depleting the secondary reservoir, Causing reduced ability for modulating the service emergency brakes. In such an event, the operator should observe an air leak, indications of low air pressure via the primary and secondary air gauges, and audible and visual low air pressure warning alarms. A vehicle crash is possible if these warnings are not heeded.
The fix
Dealers will replace the bendix mv-3 dash control valves free of charge. The recall began on april 14, 2008. Owners may contact kenworth at 1-425-828-4196.

Latch

08V0650006,169 vehicles affected

The problem
Paccar is recalling 6,169 my 2008 kenworth t300, t660, t800, t2000, w900 and c500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. Certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'Door locks and door retention components." The rotor in some of these door latch assemblies did not receive the proper heat treatment and may be soft.
The risk
In the event of a crash, force could cause the rotor to crack and the door would not have primary or secondary closing security which could possibly lead to injury of the vehicle occupant.
The fix
Paccar is working with trimark and will inspect and replace the door latch if it is found to be defective. The recall began on march 14, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.

Steering: shaft sector

07V591000559 vehicles affected

The problem
On certain kenworth and peterbilt heavy duty trucks equipped with tas-85 trw steering gears, the inner surface of the outer sector shaft teeth of the steering gears may have an incorrect involute profile, which may lead to chipping and damage of the gearing system.
The risk
This type of damage may cause a "bind/stick" condition in the vehicle steering during a turn increasing the risk of a crash.
The fix
Dealers will repair and replace any suspect tas-85 steering gear assembly free of charge. The recall began on january 9, 2008. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4201.

Trailer hitches

07V2690009,571 vehicles affected

The problem
On certain trucks, the removable tow hitch ,when used to tow or lift a vehicle, can fail due to defective material in the tow hitch.
The risk
If the tow hitch assembly fails while a vehicle is being towed or lifted, it may cause an accident that could result in personal injury or death.
The fix
Dealers will replace the tow pin assembly free of charge. The recall began on september 4, 2007. Owners may contact kenworth at 425-828-5440 or peterbilt at 940-591-4201.

Engine and engine cooling: fan

07V195000111 vehicles affected

The problem
On certain trucks built with cummins c15 or isx engines and equipped with horton engine fans, durability testing revealed micro cracks in the fan blades.
The risk
The possibility exists that these micro cracks could develop into larger cracks which could cause the fan to break apart while turning resulting in equipment damage or physical injury.
The fix
Dealers will replace the fan blade assemblies free of charge. The recall began on june 22, 2007. Owners may contact kenworth at 425-828-5440.

What owners say

Be the first T660 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

2 complaints about the 2008 Kenworth T660

Newest first, as filed with NHTSA by owners.

Engine & coolingCrashFire

2008 Kenworth t660 with a caterpillar c-15 engine. Consumer states truck caught fire after accident *tgw the consumer stated a tanker truck suddenly stopped unexpectedly and the consumers husband hit the tankers bumper. Smoke and flames started pouring out from under the good of the tractor. The consumers husband grabbed the extinguisher, ran to the front of the trunk, but because of the smoke and flames, he was unable to open the hood. He discharged the fire extinguisher under the driver's side wheel well, but...

Read the full complaint

the entire tractor was soon engulfed in flames. The fire department extinguished the flames and the tractor was towed to an impound yard. The insurance investigators could not determine the cause of the fire, due to the amount of fire damage to the engine. *Jb

Filed Incident Engine and engine coolingNHTSA 10446473
Engine & coolingElectrical system

Cummins isx engine shut down twelve times since aug (7 month period) on hwy often requiring a tow updated 4/26/10 *cn it was finally determined the wiring harness that supplied power to the ecm was not connected properly from the factory. Over time, the connection became worse which caused the engine to shut down. Updated 06/04/10. *Jb

Filed Incident Engine and engine cooling · Electrical systemNHTSA 10317599

Kenworth T660: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20121900Engine & coolingC
201111300BrakesD
201021010BrakesD
200901700-F
200821411Engine & coolingD
20070800-C
20060400-B
20050400-B
20040200-A
All T660 years

2008 Kenworth T660 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2008 Kenworth T660? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2008 Kenworth T660

Does the 2008 Kenworth T660 have any recalls?

Yes - NHTSA lists 14 recalls for the 2008 Kenworth T660: electronic stability control (ESC) (April 2020); engine and engine cooling (March 2011); tank assembly (February 2011); axle assembly (December 2010) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2008 Kenworth T660?

By the complaints owners filed with NHTSA, the most common problem areas are the engine & cooling (2), electrical system (1).

How many complaints has the 2008 Kenworth T660 had?

2 complaints have been filed with NHTSA, the first on March 5, 2010 and the latest on February 2, 2012. Of these, 1 describe a crash and 1 a fire, and together they report 0 injuries and 0 deaths.

Is the 2008 Kenworth T660 a reliable vehicle?

Its Safety Index is 26 out of 100 (grade D: more problems than a typical Kenworth T660 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Kenworth T660 years have the most complaints?
What should I do if my 2008 Kenworth T660 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience