Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2018 Kenworth T680 Problems, complaints & recalls

Owners have filed 11 complaints about the 2018 Kenworth T680 with NHTSA, most often about the brakes (4) and the driver assistance (3). Those complaints describe 1 crash and 1 fire. It is covered by 15 recalls, the latest in February 2024 for the reservoir / tank. For comparison, the 2017 has 9 and the 2019 has 8.

NHTSA data checked

CAbout as many problems as a typical T680 year, for its age

#180 most complained-about 2018 vehicle

Complaints
11
Recalls
15
Crashes
1
Fires
1
Injuries
0
Deaths
0

Most common 2018 Kenworth T680 problems

Share of all 11 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.

2018 Kenworth T680 recalls 15

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Service brakes: reservoir / tank

24V145000936 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
The risk
Insufficient air volume can reduce braking performance and increase the risk of a crash.
The fix
Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 24KWD.

Steering: critical fasteners

22V27700017,641 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
The risk
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
The fix
Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

Electrical system: wiring

21V00N0001,107 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.
The risk
The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.
The fix
Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.

Service brakes: antilock

20V5930001,416 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2016-2021 Kenworth T680 trucks equipped with a 2.1m Cab and WABCO 6S/6M ABS brake system with drum brakes. The brake systems were manufactured with a standard rear-brake ABS modulator valve instead of a quick release valve, which may exceed the intended service-brake release timing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
The risk
Longer than expected service-brake release timing may lengthen vehicle stopping distance, increasing the risk of a crash.
The fix
PACCAR will notify owners, and dealers will replace the standard rear-brake, ABS modulator valve with a quick release valve, free of charge. The recall began November 30, 2020. Owners may contact PACCAR customer service at 1-425-828-5888. PACCAR's number for this recall is 20KWD.

Electronic stability control (ESC)

20V199000460,515 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
The risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
The fix
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Parking brake

19V2750001,837 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 T680 and T880 tandem axle vehicles equipped with a parking brake on a single axle and certain models of automated manual transmissions. During cold temperatures, the signal from the park brake pressure switch to the transmission controller may be delayed possibly resulting in the vehicle moving unexpectedly.
The risk
Unexpected vehicle movement may increase the risk of a crash or injury.
The fix
PACCAR will notify owners and dealers will replace the park brake pressure switch, free of charge. PACCAR issued owners and interim notification on June 3, 2019. The recall began August 6, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 19KWB.

Power train: clutch assembly

18V93100025,556 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
The risk
Unintended movement of a vehicle can increase the risk of a crash.
The fix
PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

Seat belts: buckle assembly

18V8700006,857 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T680 and T880, and Peterbilt 567 and 579 trucks. The seat belt buckle assemblies on these vehicles may have been glued and not sewn during manufacturing, possibly causing the assembly to come apart under load, such as in the event of a crash.
The risk
If the seat belt buckle assembly separates, it can prevent the occupant from being properly restrained in the event of a crash, increasing the risk of a crash.
The fix
PACCAR will notify owners, and dealers will replace the seat belt buckle assemblies that were not sewn, free of charge. PACCAR issued owners an interim notification on February 4, 2019. The recall began February 28, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's numbers for this recall is 18KWG, and 18PBD.

Exterior lighting

18V8160001,619 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2013-2019 Kenworth T680 and T880 and Peterbilt 579 trucks, greater than 30 feet long and equipped with side extender mounted intermediate marker lamp/turn signals that do not include a reflex reflector. Since both intermediate side marker lamps and reflex reflectors are required, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
The risk
Missing reflex reflectors can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
The fix
PACCAR will notify owners and dealers will install reflex reflective tape, free of charge. The recall began January 15, 2019. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWF, and 18PBC.

Engine and engine cooling: diesel

18V65700048,896 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
The risk
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
The fix
Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 18E081.

Electronic stability control (ESC)

18V36800085,626 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 567 and 579 trucks and 2015-2018 Kenworth T660, T680, T800, T880 and W900 trucks. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
The risk
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
The fix
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on July 30, 2018. Owners may contact Peterbilt customer service at 1-918-259-3258 or Kenworth customer service at 1-425-828-5000.

Electrical system: instrument cluster / panel

18V0920001,938 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Kenworth T680 and T880 trucks, and Peterbilt 567 and 579 trucks, all equipped with an automated Eaton UltraShift Plus or Eaton Advantage Transmission with right hand stalk shifter. The display that indicates which transmission gear the driver selected may display incorrectly. The display can indicate 'N' when the shifter is set into 'D' or 'R', and the as a result, the truck will not move. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence/Starter Interlock/Transmission Braking Effect," and number 101, "Control and Displays."
The risk
A truck that does not move as expected can increase the risk of a crash.
The fix
PACCAR will notify owners, and dealers will install a transmission software update, free of charge. The recall began on March 9, 2018. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 18KWA and 118-A.

Power train: control module (tcm / pcm / tecm)

17V8400001,222 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2018 Peterbilt 567, 579, Kenworth T680, and T880 trucks, equipped with certain Eaton Endurant and PACCAR AMT transmissions. The transmission control module (TCM) may allow the engine to crank briefly even if the transmission shifter is not in neutral. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence/Starter Interlock/Transmission Braking Effect."
The risk
If the transmission is not in neutral when the engine begins running, there may be unintended vehicle movement, increasing the risk of a crash.
The fix
PACCAR will notify owners, and dealers will update the TCM software, free of charge. The recall began February 6, 2018. Owners may contact Peterbilt customer service at 1-940-591-4000, or Kenworth customer service at 1-425-828-5000. PACCAR's numbers for this recall are 1217F and 1717KWF.

Fuel system

17V4430001,737 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.
The risk
An engine stall can increase the risk of a crash.
The fix
Cummins will notify the vehicle purchaser, and Cummins dealers will replace the fuel pumps, free of charge. The recall began July 1, 2017. Owners may contact Cummins customer service at 1-800-286-6467 or PACCAR customer service at 1-425-468-7400. PACCAR's number for this recall is C1909.

Fuel system: hoses, lines / piping, and fittings

17V103000465 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2015-2018 Kenworth K370, T680, T880 and 2017-2018 Peterbilt 567 and 579 trucks. The plastic fuel tee fittings on these trucks may leak fuel.
The risk
A fuel leak in the presence of an ignition source can increase the risk of a fire.
The fix
Kenworth and Peterbilt will notify owners, and dealers will replace the suspect fuel tees, free of charge. The recall began on April 13, 2017. Owners may contact Kenworth customer service at 1-425-828-5000 and Peterbilt customer service at 1-940-591-4000. PACCAR's numbers for this recall is 17KWA and 217-A.

What owners say

Be the first T680 owner to share.

2 people checked this vehicle in the last 30 days. Problems or none - your experience is exactly what the next buyer is looking for. Write it now

11 complaints about the 2018 Kenworth T680

Newest first, as filed with NHTSA by owners.

Wheels & tiresCrash

See attached document for complaint.

Filed Incident TiresNHTSA 11655149
Transmission & drivetrainElectrical systemEngine & cooling

We bought this truck with 401, 000 miles on it. So far we have had to replace the rear ends twice. the whole DPF system, the check engine light still on since the day we bought the truck. We have had 5 NOS sensors put into the truck, 6 input and output sensors put into the truck. This truck has been defective since the day of purchase. We keep having the same error code of p3770 come up evetime we take to shop. The error code has been looked at so many times that even the master techs don't know what is wrong with the truck other then we keep replacing the same stuff over and over again.

Filed Incident Power train · Electrical system · EngineNHTSA 11518882
Brakes

The air dryer bracket part number G11-6218 was craked and because of that it wasn't secured to the frame. The air dryer was hanging on the airline with the piece of the broken bracket. It is not secured. That is extremely unsafe because it could brake airlines and trucks would lose its brakes.

Filed Incident Service brakesNHTSA 11475046
Seats & seat beltsVisibility & wipers

Seat belt frame cover was cracked and seat belt would not retract. The other side was broken as well with casing coming off. I was in the middle of backing for a delivery and the driver seat retract would not stay in place and the seat kept folding forward causing me to not be able to back the truck. I was told this is due to obese drivers causing the seat to break. Also during the time of my brake issue where are the brakes locked up and on several other occasions the air brake lost pressure for no reason.

Filed Incident Seat belts · Seats · Visibility / wiperNHTSA 11420956
BrakesDriver assistance

I started the truck after not driving for 1 day and a heavy rain storm the day prior. I attempted to drive bobtail when the brakes locked up. The traction control light came on then went back off. Then the adaptive cruise control notification came on. The regon came on then went back off. A speedometer sign with an exclamation mark came up and would not go away. After attempting to go down the road the brakes continued to lock up, would not release and caused the rear passenger tires to go bald and lose my job.

Filed Incident Unknown or other · Service brakes · Forward collision avoidanceNHTSA 11420954
Driver assistance

Automatic emergency braking is an absolute danger to the motoring public and needs to be eliminated immediately. I am sick and tired of engineer's who don't know their ass from a hole in the ground designing bullshit that doesn't work. Far too many false radar returns and unwanted hard stops to be of any use. I do not own this vehicle but if I did the first thing I would do right after I pull the fuse for the lane departure warning would be to isolate and bypass aeb. This will be done on any vehicles I purchase in the future and I do not care what the law states about doing so

Filed Incident Forward collision avoidanceNHTSA 11415137
Transmission & drivetrain

Unit had clutch failure failed to disengage under 18e-102, per federal guidlines it falls under the clutch range of au1704192065 and falls under eatons original campaign release but they revised it to where it does not cover this one becuase now they changed the range to au1711 thru au1804 but we are seeing a lot of failure below au1711, why does eatons document not match the federal documents? And why are we seeing these clutch failures on trucks that were revised and said to now be good, but they are failing in the same manner

Filed Incident Power trainNHTSA 11372492
Driver assistance

Tl* the contact owns a 2018 kenworth construct t680. While driving through snow or ice, the vehicle's adaptive cruise control would flash as if the vehicle were approaching something and activated by stopping the vehicle in order to prevent a crash. The contact stated that the failure only occurred during this type of weather even when there were no other vehicles or objects nearby. The contact spoke with the kenworth hotline for vehicle breakdowns who stated that they did not consider this a failure. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the issue. The approximate failure mileage was 292,000.

Filed Incident Forward collision avoidanceNHTSA 11265428
BrakesFire

Unit driving on flat road, left front drives started smoking while driving on interstate brakes not being applied, driver stopped and by this time the fire had spread thru the under side of truck and trailer, total loss of truck, trailer and load, belived to be haldex brake can failure leaking air and causing brakes to drag and start on fire

Filed Incident Service brakesNHTSA 11166776
Seats & seat belts

Seat belt alarm never turn off even if I have my seat belt on

Filed Incident Seat beltsNHTSA 11145222
Brakes

The mitigation system causes a 'hard braking' event to occur. Can be triggered by an overpass, construction zones, truck in another lane, etc. Usually occurs on highways while at our top speed of 65 mph. It will cause a hard brake down to 45 mph. Can occur during night or daytime.

Filed Incident Service brakesNHTSA 11112360

Kenworth T680: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
202221000BrakesC
20210700-B
20208800Transmission & drivetrainC
20198902BrakesC
2018111511BrakesC
201791105BrakesC
201661600BrakesC
201581112Engine & coolingC
2014101301Visibility & wipersC
All T680 years

2018 Kenworth T680 vs rivals

VehicleComplaintsRecallsCrashesGrade
2018 Kenworth T68011151C
2018 Kenworth T8803162DCompare
2018 Kenworth T8001110CCompare
2018 Kenworth T370160CCompare

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2018 Kenworth T680? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2018 Kenworth T680

Does the 2018 Kenworth T680 have any recalls?

Yes - NHTSA lists 15 recalls for the 2018 Kenworth T680: reservoir / tank (February 2024); critical fasteners (April 2022); wiring (December 2021); antilock (September 2020) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

What are the most common problems with the 2018 Kenworth T680?

By the complaints owners filed with NHTSA, the most common problem areas are the brakes (4), driver assistance (3), transmission & drivetrain (2).

How many complaints has the 2018 Kenworth T680 had?

11 complaints have been filed with NHTSA, the first on July 19, 2018 and the latest on April 17, 2025. Of these, 1 describe a crash and 1 a fire, and together they report 0 injuries and 0 deaths.

Is the 2018 Kenworth T680 a reliable vehicle?

Its Safety Index is 41 out of 100 (grade C: about as many problems as a typical Kenworth T680 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which Kenworth T680 years have the most complaints?
What should I do if my 2018 Kenworth T680 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience