PACCAR Incorporated (PACCAR) is recalling certain 2022 Kenworth T680, T880, and W990 vehicles. The HVAC controls may have insufficient soldering between the potentiometer(s) and the PCBA board, resulting in windshield defrost failure.
Visibility & wipers
Kenworth T680 Visibility problems by year
7 complaints filed with NHTSA about the Kenworth T680's visibility & wipers. Windshields, wipers, defrosters, mirrors, backup cameras and glare.
Visibility complaints by model year
Visibility recalls
PACCAR Incorporated (PACCAR) is recalling certain 2020 Peterbilt 520 and 579 vehicles and Kenworth T680, T880 and W990 vehicles. The mirror glass may detach from the mirror carrier plate due to inadequate adhesion.
Latest T680 visibility complaints
The contact owns a 2023 Kenworth T680. The contact stated that while operating the vehicle and pressing the wiper fluid button, the wiper fluid did not immediately spray, and the contact was unable to immediately clean the front windshield. The contact stated the after several attempts the wiper fluid sprayer operated normally. Later, the front windshield wipers malfunctioned. The contact stated that when the front windshield wipers were activated in the continuous setting, the wipers were randomly delayed....
Read the full complaint
Additionally, while activating the turn signal and the wipers the features were delayed. The vehicle was taken to the local dealer who diagnosed an electrical short in the wiper and turn signal mechanism, and that the mechanism needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was 205,000. The VIN was invalid.
Seat belt frame cover was cracked and seat belt would not retract. The other side was broken as well with casing coming off. I was in the middle of backing for a delivery and the driver seat retract would not stay in place and the seat kept folding forward causing me to not be able to back the truck. I was told this is due to obese drivers causing the seat to break. Also during the time of my brake issue where are the brakes locked up and on several other occasions the air brake lost pressure for no reason.
The defrost door has broken in this vehicle for a second time. The kenworth design is problematic and even the new parts only fix this for a short time. Driver no longer has defrost when this happens making it an unsafe driving situation. Vehicle was in motion at the time it broke.
The defrost door broke on this truck leaving the driver stranded with no defrost and ability to safely drive the vehicle until the windows cleared off. The defrost doors in the t680 is weak and breaks often leaving the driver without any defrost causing his visibility to decrease in an unsafe manner. Kenworth has been unwilling to address this issue and repair it. When I contacted our district service manager he knew the part number of the replacement door assembly and stated in an email back to me that...
Read the full complaint
kenworth has identified the issue and is working to fix it on future models. Labor to repair this is over $3000 and the part is another $886. We have 12 of these vehicles, so far 5 of the 12 have broken leaving more than one driver struggling to get off the highway before his window fogged up so bad he became unsafe to drive. The vehicles are in motion when these defrost doors break and it creates a very unsafe situation as trucks can not just pull over any spot they choose on the highways and wait for a window to thaw out. There are 2 issues that happen on these doors. 1 The door is overflexed by the electric actuator motor and snaps the drive cogs off of the door. 2 The doors either shrink or are too small to begin with and the drive cog does not make full contact with the actuator motor causing the teeth to strip out as in the photos attached. The drive cog should be extruded from the housing but as you can see are shrunk inside the housing. *Tr
This is the second time the defrost doors have broken in this vehicle leaving the driver in an unsafe driving condition. The first time was 4/25/16 the defrost doors in the t680 is weak and breaks often leaving the driver without any defrost causing his visibility to decrease in an unsafe manner. Kenworth has been unwilling to address this issue and repair it. When I contacted our district service manager he knew the part number of the replacement door assembly and stated in an email back to me that kenworth...
Read the full complaint
has identified the issue and is working to fix it on future models. Labor to repair this is over $3000 and the part is another $886. We have 12 of these vehicles, so far 5 of the 12 have broken leaving more than one driver struggling to get off the highway before his window fogged up so bad he became unsafe to drive. The vehicles are in motion when these defrost doors break and it creates a very unsafe situation as trucks can not just pull over any spot they choose on the highways and wait for a window to thaw out. *Tr
This is the first of 2 times the defrost doors have broken in this truck. The defrost doors in the t680 are weak and break often leaving the driver without any defrost causing his visibility to decrease in an unsafe manner. Kenworth has been unwilling to address this issue and repair it. When I contacted our district service manager he knew the part number of the replacement door assembly from memory and stated in an email back to me that kenworth has identified the issue and is working to fix it on future models....
Read the full complaint
Labor to repair this is over $3000 and the part is another $886. We have 12 of these vehicles, so far 5 of the 12 have broken leaving more than one driver struggling to get off the highway before his window fogged up so bad he became unsafe to drive. The vehicles are in motion when these defrost doors break and it creates a very unsafe situation as trucks can not just pull over any spot they choose on the highways and wait for a window to thaw out. There are 2 issues that happen on these doors. 1 The door is overflexed by the electric actuator motor and snaps the drive cogs off of the door. 2 The doors either shrink or are too small to begin with and the drive cog does not make full contact with the actuator motor causing the teeth to strip out as in the photos attached. The drive cog should be extruded from the housing but as you can see are shrunk inside the housing. *Tr
The defrost doors in the t680 is weak and breaks often leaving the driver without any defrost causing his visibility to decrease in an unsafe manner. Kenworth has been unwilling to address this issue and repair it. When I contacted our district service manager he knew the part number of the replacement door assembly from memory and stated in an email back to me that kenworth has identified the issue and is working to fix it on future models. Labor to repair this is over $3000 and the part is another $886. We have...
Read the full complaint
12 of these vehicles, so far 5 of the 12 have broken leaving more than one driver struggling to get off the highway before his window fogged up so bad he became unsafe to drive. The vehicles are in motion when these defrost doors break and it creates a very unsafe situation as trucks can not just pull over any spot they choose on the highways and wait for a window to thaw out. There are 2 issues that happen on these doors. 1 The door is overflexed by the electric actuator motor and snaps the drive cogs off of the door. 2 The doors either shrink or are too small to begin with and the drive cog does not make full contact with the actuator motor causing the teeth to strip out as in the photos attached. The drive cog should be extruded from the housing but as you can see are shrunk inside the housing. *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data