- The problem
- On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
- The risk
- There is a possibility that the pivot bolt can become loose without the driver's knowledge. When this occurs, the driver Could drive away and the trailer could become disengaged, increasing the risk of a crash.
- The fix
- Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on january 28, 2008. Owners may contact mack trucks at 1-800-528-6586.
Vehicle safety record
2008 Mack CV Problems, complaints & recalls
No owner complaints about the 2008 Mack CV have been filed with NHTSA. It is covered by 3 recalls, the latest in October 2007 for the fifth wheel assembly.
NHTSA data checked
BFewer problems than a typical CV year, for its age
- Complaints
- 0
- Recalls
- 3
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
2008 Mack CV recalls 3
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- On certain trucks equipped with parker single check valves (scv) provided by bendix. The defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. After prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve.
- The risk
- This condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. These conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes.
- The fix
- Mack is working with bendix to replace the parker single check valve. The recall began on january 9, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
- The problem
- On certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
- The risk
- This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
- The fix
- Mack is working with bendix to repair these vehicles (please see 07e037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on january 10, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.
What owners say
Be the first CV owner to share.
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
No complaints about the 2008 Mack CV yet
No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.
Mack CV: every year compared
All CV years2008 Mack CV vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2008 Mack CV | 0 | 3 | B | |
| 2008 Mack CL | 1 | 1 | B | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2008 Mack CV
Does the 2008 Mack CV have any recalls?
Yes - NHTSA lists 3 recalls for the 2008 Mack CV: fifth wheel assembly (October 2007); check valve (August 2007); parking brake (August 2007). Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
How many complaints has the 2008 Mack CV had?
None have been filed with NHTSA so far.
Is the 2008 Mack CV a reliable vehicle?
Its Safety Index is 68 out of 100 (grade B: fewer problems than a typical Mack CV year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Mack CV years have the most complaints?
2003 (2), 2005 (2). See every Mack CV year compared.
What should I do if my 2008 Mack CV has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data