- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
- The risk
- Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.
Vehicle safety record
2013 Mack Pinnacle (cxu) Problems, complaints & recalls
Owners have filed 2 complaints about the 2013 Mack Pinnacle (cxu) with NHTSA, most often about the transmission & drivetrain (1) and the electrical system (1). It is covered by 13 recalls, the latest in December 2016 for the hub. For comparison, the 2012 has 0 and the 2014 has 0.
NHTSA data checked
FFar more problems than a typical Pinnacle (cxu) year, for its age
#327 most complained-about 2013 vehicle
- Complaints
- 2
- Recalls
- 13
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Most common 2013 Mack Pinnacle (cxu) problems
Share of all 2 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2013 Mack Pinnacle (cxu) recalls 13
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2013 Pinnacle (CXU) trucks manufactured April 16, 2012, to May 4, 2012. These vehicles are equipped with certain Meritor FF967 non-drive front steer axles that may have been incorrectly heat treated.
- The risk
- The improperly heat treated axles may fracture, resulting in a loss of vehicle control and increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will inspect the axles for specific heat code serial numbers. The affected axles will be replaced, free of charge. The recall began on August 1, 2016. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0404.
- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
- The risk
- If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.
- The risk
- If the fifth wheel and locking mechanism are sufficiently damaged, the locking mechanism may fail to operate as intended and the trailer may unexpectedly detach from the tractor, increasing the risk of a crash.
- The fix
- Mack will notify owners, and Fontaine dealers will replace the fifth wheel with an Ultra NT model fifth wheel, free of charge. The recall began on November 18, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0395.
- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 Pinnacle (CXU) trucks manufactured from October 3, 2012, through February 18, 2014 and equipped with Meritor air disc brakes. In the affected vehicles, the brake chambers may have been incorrectly mounted resulting in internal contamination of the air brake calipers.
- The risk
- Contamination of the calipers may cause a loss of brakes on one wheel, lengthening the distance required to stop the vehicle, increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will inspect the disc brake caliper and brake chamber to determine if the washers are located in the correct position. If the washers are in the correct position, no further action is required. If the washers are not located in the correct position, replacement of the disc brake caliper and brake chamber will be performed and the addition of two washers per brake assembly will be installed, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0392.
- The problem
- Mack Trucks, Inc (Mack) is recalling certain model year 2012-2015 CXU trucks manufactured February 4, 2011, to December 23, 2014, and equipped with an air release fifth wheel latch. The affected vehicles have a switch to release the fifth wheel latch that may invertently be pushed and cause the trailer to unintentionally disconnect from the tractor after the parking brake has been released.
- The risk
- An inadvertent decoupling of the trailer from the tractor may increase the risk of a crash.
- The fix
- Mack will notify owners, and dealers will install a secondary action that operators will need to activate before the fifth wheel will release, free of charge. The recall began on May 6, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0390.
- The problem
- Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
- The risk
- If the driver is not warned of something being in the truck's path, there is an increased risk of a crash.
- The fix
- Mack will notify owners, and dealers will reprogram the vehicle control unit, free of charge. The recall began on September 30, 2014. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0381.
- The problem
- Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.
- The risk
- A failure of the hazard warning lights could reduce the trucks visibility, increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will replace the electronic flasher unit, free of charge. The recall will begin by mid-June 2014. Interim letters went out to owners on June 23, 2014. The recall began on July 25, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0379.
- The problem
- Mack Trucks Inc. (Mack) is recalling certain model year 2010-2015 CXU trucks manufactured November 20, 2009, through January 27, 2014, and equipped with dual vertical exhaust pipes. The white conspicuity reflectors on the rear of the cab could be blocked by the exhaust pipes. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
- The risk
- A blocked reflector makes the truck-tractor less visible when operating the vehicle without a trailer in the dark, increasing the risk of a crash.
- The fix
- Mack will notify owners, and dealers will inspect the trucks and if the reflectors are blocked, they will add two vertical white reflectors to the rear glass , free of charge. The recall began on May 30, 2014. Owners may contact Mack Customer Service at 1-336-393-2000. Mack's number for this recall is SC0378.
- The problem
- Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
- The risk
- Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
- The fix
- Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
- The problem
- Mack Trucks is recalling certain model year 2013-2014 CHU, CXU, GU, LEU, and MRU vehicles manufactured with pro-torque axle spindle nuts from August 28, 2012, through August 16, 2013. The pro-torque nut may not have been installed correctly, which may result in a loosening of the nut.
- The risk
- If the nut comes loose, the hub assembly may separate from the vehicle, increasing the risk of a crash.
- The fix
- Mack Trucks will notify owners, and dealers will inspect and repair the vehicles, as necessary, free of charge. The recall began on November 12, 2013. Mack's recall number is SC0371. Owners may contact Mack Trucks at 1-336-393-2000.
- The problem
- Mack Trucks, Inc. is recalling certain model year 2013-2014 CHU, CXU, GU, MRU, and LEU trucks manufactured July 16, 2012, through march 18, 2013 and equipped with drum brakes. The clevis pin for the brake slack adjuster may be missing a cotter pin. If the cotter pin is not installed, the clevis pin may loosen and fall out causing a loss of brake function on the affected wheel.
- The risk
- A loss of brake function at one wheel will lead to increased stopping distances and pulling to the left or right when braking, which may increase the risk of a crash.
- The fix
- Mack Trucks, Inc. will notify owners, and dealers will inspect the brake slack adjusters and install the brake hardware, as necessary, free of charge. An interim was mailed to owners on June 20, 2013. A second notice was mailed to owners on September 30, 2013. Owners may contact Mack Trucks at 1-800-528-6586. Mack Trucks' recall campaign number is SC0370.
- The problem
- Mack Trucks, Inc. is recalling certain model year 2011-2013 CXU trucks manufactured November 23, 2010, through March 19, 2012. These vehicles are equipped with an MGM Type 24 J-series piston parking brake chamber. In the affected axles, the brake chambers may leak pressure allowing the parking brake to drag when it is supposed to be released. Brake dragging could lead to overheated brake components.
- The risk
- Overheated brake components could result in a fire.
- The fix
- Mack Trucks will notify owners and the brake chambers will be replaced as needed, free of charge. The safety recall is expected to begin on, or before, June 17, 2013. Owners may contact Mack at 1-800-866-1177. Mack Truck's campaign recall number is SC0369.
What owners say
Problems or none - your experience is exactly what the next buyer is looking for. Write it now
2 complaints about the 2013 Mack Pinnacle (cxu)
Newest first, as filed with NHTSA by owners.
Mack/volvo mp8/d-13 injectors: mack trucks equipped with the mp8 engines have a known injector issue that causes the truck to 1) mis-fire at road speed creating a loss of power. 2) Injector failure causes excessive soot causing on-road failures.3) The truck may not be restarted or able to be moved due to excessive cranking due to injector failure. 4) Trucks need to be towed to a repair facility when breakdown occurs. We own multiple units. This injector failure issue has been documented on majority of trucks. Documents are available. Please have an investigator contact me.
We had an issue with this truck and the m-drive transmission when the drive was coming of a highway on an exit ramp he was slowing down and the vehicles clutch stayed engaged and the driver rolled into the intersection almost hitting a car. The vehicles clutch is automatically disengages when you push on the brake while the clutch didn't disengage because when of the brake light wires had developed a corrosion spot from the winter weather and shorted out the light and caused the fuse to blow. The brake lights are...
Read the full complaint
what tells the clutch to disengage but with the fuse being blown the clutch did not disengage and kept rolling into intersection luckily my driver was smart enough to reach up and push neutral button on dash to put transmission in neutral and stop the truck. Also in our investigation we found when the fuse blows for the brake lights the cruise control will not shut off by tapping the brakes you have to manually shut it off by the switch I have no photos as nothing seriously happened my mechanic changed the fuse on the road and found the corroded wire. Mack should have a better solution than using brake lights to disengage these controls
Mack Pinnacle (cxu): every year compared
All Pinnacle (cxu) years2013 Mack Pinnacle (cxu) vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2013 Mack Pinnacle (cxu) | 2 | 13 | F | |
| 2013 Mack GU | 1 | 0 | A | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2013 Mack Pinnacle (cxu)
Does the 2013 Mack Pinnacle (cxu) have any recalls?
Yes - NHTSA lists 13 recalls for the 2013 Mack Pinnacle (cxu): hub (December 2016); front (June 2016); driveshaft (February 2016); fifth wheel assembly (October 2015) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2013 Mack Pinnacle (cxu)?
By the complaints owners filed with NHTSA, the most common problem areas are the transmission & drivetrain (1), electrical system (1), engine & cooling (1).
How many complaints has the 2013 Mack Pinnacle (cxu) had?
2 complaints have been filed with NHTSA, the first on March 2, 2016 and the latest on August 26, 2016. Of these, 0 describe a crash and 0 a fire, and together they report 0 injuries and 0 deaths.
Is the 2013 Mack Pinnacle (cxu) a reliable vehicle?
Its Safety Index is 14 out of 100 (grade F: far more problems than a typical Mack Pinnacle (cxu) year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
What should I do if my 2013 Mack Pinnacle (cxu) has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data