Steering wheel retaining nuts may have been improperly installed and/or torqued.
Steering
Mack R Series Steering problems by year
0 complaints filed with NHTSA about the Mack R Series's steering. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
Steering complaints by model year
Steering recalls
An incorrect high pressure power steering hose may have been installed.
Some of the nuts/bolts used to fasten the steering pitman arm may loosen.
Improper steering clamp bolts and torque applied during installation. The bolt could fail, allowing the steering yoke to become loose.
The pitman arm retaining bolt may not have been tightened to the required specifications due to a design change. Inadequate retention of the bolt to the output shaft could allow the pitman arm to loosen.
The weld on the upper steering shaft where the female spline connects to the tube assembly may have been incorrectly positioned and actually missed the seam.
The prefabricated pinch bolt clamp at the lower steering shaft lower yoke may not perform adequately when tightened to specifications. The clamp may then deform and loss of clamping force and steering shaft disengagement may result.
The steering arm may develop cracks due to insufficient fatigue life in the machine radius of the taper at the steering knuckle end.
Latest R Series steering complaints
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data