Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2024 Peterbilt 367 Problems, complaints & recalls

No owner complaints about the 2024 Peterbilt 367 have been filed with NHTSA. It is covered by 5 recalls, the latest in May 2025 for the modulator.

NHTSA data checked

FFar more problems than a typical 367 year, for its age

Complaints
0
Recalls
5
Crashes
0
Fires
0
Injuries
0
Deaths
0

2024 Peterbilt 367 recalls 5

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Service brakes: modulator

25V353000315 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 2026 Peterbilt 548, 589, and 2024-2026 Peterbilt 567 trucks. The rear brake piping assembly may have insufficient clearance, which can result in a loss of service brakes or anti-lock brake function.
The risk
Brake failure can increase the risk of a crash.
The fix
Dealers will install new brake hoses and correct the rear brake piping assembly, free of charge. Owner letters were mailed September 8, 2025. Owners may contact Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PBE.

Service brakes: control unit / module

24V915000220,764 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
The risk
Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
The fix
Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWL and 24PBL.

Steering: arm

24V90800068 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 548, Kenworth T480, T800, 2024-2025 Peterbilt 520, 567 and Kenworth T880 vehicles with PACCAR 20k steer axles. The steering arm and/or tie rod bracket fasteners may fail, resulting in a loss of steering control.
The risk
A loss of steering control increases the risk of a crash.
The fix
Dealers will install new correctly torqued fasteners, free of charge. Owner notification letters were mailed January 21, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 or Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24KWK and 24PBK.

Power train: column shift

24V19000070,509 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication.
The risk
A loss of communication between the gear shifter and the transmission may result in the vehicle becoming disabled after coming to a stop, increasing the risk of a crash.
The fix
Dealers will inspect and replace the gear shifter assembly as necessary, free of charge. Owner letters were mailed December 15, 2025, then phased after that. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 24PBE and 24KWE.

Steering: arm

24V04300068 vehicles affected

The problem
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.
The risk
An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture and increasing the risk of a crash.
The fix
Dealers will inspect and replace the steering knuckle assemblies as necessary, free of charge. Owner letters were mailed February 23, 2024. Owners may contact Peterbilt customer service at 1-940-591-4220 and/or Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 24PBB and 24KWB.

What owners say

Be the first 367 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

No complaints about the 2024 Peterbilt 367 yet

No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.

Peterbilt 367: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20250100-B
20240500-F
20230600-F
20220600-D
20210500-C
20200400-C
All 367 years

2024 Peterbilt 367 vs rivals

VehicleComplaintsRecallsCrashesGrade
2024 Peterbilt 367050F
2024 Peterbilt 579370FCompare
2024 Peterbilt 567280FCompare
2024 Peterbilt 389250FCompare
2024 Peterbilt 5481140DCompare

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2024 Peterbilt 367? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2024 Peterbilt 367

Does the 2024 Peterbilt 367 have any recalls?

Yes - NHTSA lists 5 recalls for the 2024 Peterbilt 367: modulator (May 2025); control unit / module (December 2024); arm (December 2024); column shift (March 2024) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

How many complaints has the 2024 Peterbilt 367 had?

None have been filed with NHTSA so far.

Is the 2024 Peterbilt 367 a reliable vehicle?

Its Safety Index is 21 out of 100 (grade F: far more problems than a typical Peterbilt 367 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

What should I do if my 2024 Peterbilt 367 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience