- The problem
- PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
- The risk
- Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
- The fix
- Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.
Steering
2019 Peterbilt 389 Steering problems
Owners have filed 1 complaint about the 2019 Peterbilt 389's steering with NHTSA - 33% of all its complaints, most recently on March 9, 2022. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
- Complaints
- 1
- Recalls
- 1
- Crashes
- 0
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Steering recalls for the 2019 Peterbilt 389
Steering complaints
- The steering arm on the driver side of the Dana D-Series axle that was installed from the Peterbilt factory on a new 2019 Peterbilt 389 that was purchased new by Acord Transportation, Inc. is what failed. The steering arm on the D-Series axle bolts to the steering knuckle with two bolts as opposed to being one solid cast piece as in other families of Dana axles - such as the E-Series. When backing into a parking space the two bolts holding the steering arm to the steering knuckle broke, causing the steering arm...
Read the full complaint
to come free from the steering knuckle - ultimately causing a catastrophic failure and a complete loss of steering. Peterbilt took the steering arm for inspection following the failure, but did not return it to us. - Had this incident occurred while traveling on a public roadway, the driver would have lost all ability to steer the commercial vehicle (which could potentially be weighing 80,000 lbs and transporting hazardous materials) and would have no control over where the unit went. It could have resulted in an auto or property collision - potentially causing multiple injuries or fatalities. - We know of another company that has had two failures identical to this one. Allegedly, Dana Spicer admitted to our Peterbilt dealer that they knew of 12 other failures such as this. - The truck that experienced the failure was taken to the dealership where it was purchased. It was repaired by retrofitting the axle to the E-Series components. As mentioned, they kept the steering arm/bolts that failed. - There was no warning, nor is there potential to be any warning. If this happens, it will happen immediately and all control of the vehicle by the driver will be lost. The bolts that failed appeared to have been corroding for a period of time prior to the failure. However, there is no way to visually inspect the condition of the bolts without removing several components on the tire/wheel, hub and brake assembly and completely removing the bolts.
Peterbilt 389 steering complaints by year
389 steering problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data