- The problem
- Pierce Manufacturing (Pierce) is recalling certain model year 2014-2016 Enforcer and Saber emergency vehicles manufactured from March 3, 2014, through February 3, 2016. The clamps on the heater hose may have been improperly installed allowing engine coolant to leak into the passenger compartment.
- The risk
- If coolant leaks into the passenger compartment, it may contact electrical components causing a shorting of circuits and a loss of function of features controlled by those circuits, including loss of power to vehicle which may result in a stall and increase the risk of a crash. The hot coolant may also contact occupants and possibly cause burn injuries.
- The fix
- Pierce will notify owners, and dealers will inspect the hose clamp installation. Any improperly installed clamps will be corrected free of charge. The recall began on April 11, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B269.
Electrical system
2016 Pierce Saber Electrical problems
Owners have filed 1 complaint about the 2016 Pierce Saber's electrical system with NHTSA - 100% of all its complaints, most recently on March 28, 2019. They describe 0 crashes, 1 fire and 2 injuries. Dead batteries, warning lights, wiring, alternators, infotainment and electronic module failures.
- Complaints
- 1
- Recalls
- 1
- Crashes
- 0
- Fires
- 1
- Injuries
- 2
- Deaths
- 0
Electrical recalls for the 2016 Pierce Saber
Electrical complaints
City of dayton fire-rescue firefighters were returning from a fire alarm when they noticed a "burning wires" smell in the passenger compartment of the 2016 pierce saber they were driving. As firefighters were attempting to find a safe location to stop the truck, all of the cab and dash lights began to flicker on and off repeatedly. The passenger compartment of the truck rapidly filled with smoke and the driver/operator had to make an emergency stop with his vision impaired by smoke. As firefighters were exiting...
Read the full complaint
the apparatus, the driver/operator was able to shut the engine down and turn off the electrical power. Firefighters had to remove two panels in the passenger side dash/floorboard to expose the flames. The fire was extinguished with an abc dry chemical extinguisher. Two firefighters were exposed to smoke and toxic gases produced by flaming combustion. Both were evaluated on scene and refused further medical treatment at that time. The flames were seen behind the circuit board/fuse panel, but the heat was conducted through the panel causing damage and discoloration to the front of the board. Subsequent inspection by a pierce certified mechanic (evs fire apparatus) indicated that the fire was caused by electrical arcing caused by a coolant leak in the truck's heater core. He reported that the fluid had penetrated the relay connected to the back of the board that controlled the abs braking system. This case appears to be connected to the national highway transportation safety administration's case #16v148000 as the truck was manufactured in january of 2016, but was never recalled.
Pierce Saber electrical complaints by year
Saber electrical problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data