2022 Ram 3500 Problems, complaints & recalls

I noticed that my gear shift lever was loose. I removed the boot of the shifter and found the 10mm bolt holding the shifter in place finger tight. It definitely would have fell out in a short period of time leaving the driver unable to shift into park or into any other gear. This could have been a very dangerous situation. I tightened the bolt and reinstalled the boot.

The contact owns a 2022 Ram 3500. While driving approximately 35 - 40 MPH or while reversing at undisclosed speeds, the steering wheel intermittently seized. The contact stated that after decelerating, the steering feature released and operated as needed. The failures nearly caused a crash on several occasions. The vehicle was taken to the dealer, and it was determined that there was moisture inside the steering sensor and that the steering sensor needed to be replaced. The manufacturer was notified of the failure by phone, and a case was filed. The failure mileage was approximately 33,000.

On the morning of August 29th around 8:10am the Ram truck caught fire under the hood with the engine/ignition off, after it was driven around the yard lot and shut off. The fire seems to have originated in the center of the engine on the drivers side of the cylinder head. Mimicking the same patterns as the recall #13A in regards to the heated grid recall that was performed in March of 2025, @121338 miles. The truck now has 157032 miles. The driver was able to extinguish the fire before the fire spread beyond the engine bay. the truck is currently locked up on site at our facility.

The contact owns a 2022 Ram Promaster 3500. The contact stated that while driving approximately 30 MPH while making a left turn, the steering wheel suddenly jerked to the left and the right. The EPS warning light illuminated. In addition, the contact stated that while in reverse, the steering wheel jerked and became firm. The local dealer was not contacted. The vehicle was not diagnosed or repaired. Additionally, while driving at various speeds and making a left or right turn, the brakes unintendedly activated while the accelerator pedal was depressed. The manufacturer was not made aware of the failure. The failure mileage was approximately 45,169.

Drag link snapped off on the passenger steering knuckle

Loss of transmission due to Aisin K1 Clutch / Input Shaft failure.

The contact owns a 2022 Ram 3500. The contact stated that while parking the vehicle, the contact unhooked the camper that was being towed and shifted the vehicle to drive(D) but the vehicle failed to move forward or backwards while in reverse(R). The contact associated the failure with NHTSA Action Number: PE24009 (Power Train). The vehicle was towed to the dealer and was diagnosed with transmission failure. The vehicle was repaired; however, the failure persisted. The manufacturer was made aware of the failure. The failure mileage was approximately 46,000.

While travelling in Southern California, I came to a stop to enter I8 on ramp. When I tried to start down the on ramp the truck didn't want to move and a check engine light came on. The truck went into limp mode so would travel slowly along. I called Mango Auto who could diagnose it the following morning. I did not make it to the shop before the transmission failed completely and the truck wouldn't move leaving me in traffic in a dangerous spot. Eventually I was towed to the shop in Yuma AZ. They diagnosed it as a...

The contact owns a 2022 Ram 3500. The contact stated that while driving at an undisclosed speed, the engine made abnormal knocking and ticking sounds. The knocking and ticking sounds became louder while accelerating. There was no warning light illuminated. The vehicle was taken to an independent mechanic, who determined that the piston had ingested the grid heater nut. The mechanic replaced the piston, cylinder head assembly, gaskets, rod, gasket intake, Hamilton flat tappet conversion kit, and XDP grid heater. The manufacturer was made aware of the failure. The failure mileage was 88,745.

In a 55mph car accident where the vehicle has been totaled and none of the airbags deployed

Vehicle lost drive via the transmission when it disengaged unexpectedly. Known issue that Stellantis classifies under "Customer Satisfaction Notice" instead of a recall. There are many examples of recalls issued by other manufacturers related to loss of drive via the transmission, so why is this being treated as a notice of inconvenience versus a safety issue? Issue is being addressed via a Technical Service Bulletin where units that fail are repaired after the fact versus proactively inspected and replaced.

The center infotainment stack screen refused to power up when starting the vehicle. The radio and hvac functions worked, but the screen would not turn on preventing the backup camera from functioning. Restarting the system twice and restarting the vehicle failed to get the system to function. Upon restart several hours later all systems appear to function normally. A video is available of the failure.

### **NHTSA Complaint Statement of Facts** **RE: Recall Y43 (NHTSA Campaign 22V-406) - Failure of Recall Remedy** **Summary:** The manufacturer (Stellantis/FCA) is refusing to provide a complete and effective remedy for **Recall Y43**. My 2022 Ram 3500 was manufactured without the **Particulate Matter (PM) Sensor**, a defect officially acknowledged in Recall Y43. This factory omission has caused terminal blockage of the **Diesel Particulate Filter (DPF)** - a specific consequential failure documented in the...

Valvetrain No Yes Yes No

I own this truck and have had issues with the exhaust regeneration process for about 6 months. I have taken it to the dealer 3 times and they have done diagnostics and replaced the diesel particulate filter, but the issue continues to happen. They have now told me that the system is not reparable and they don't have support from RAM manufacturer to troubleshoot and repair this issue. They have multiple customers with the same issue with the diesel exhaust system not operating properly, hampering the engine...

The contact owns a 2022 Ram 3500. The contact stated that while driving approximately 10-15 MPH, there was an abnormal rattling sound coming from the vehicle. The engine warning light was illuminated. The local dealer was contacted, and it was determined that the grid heater bolt had melted and fallen into the engine. The vehicle was repaired after two months due to the piston being on backorder. The manufacturer was contacted, but no additional assistance was provided. The approximate failure mileage was 35,000. The VIN was not available.

Driver of the 2022 Ram 3500 pulled out of a driveway onto a street and ran over a pedestrian who was crossing in front of him. Driver states he did not see the pedestrian. I understand the 2022 Ram 3500 is equipped with front ParkSense Sensors, but these sensors failed to deploy. The pedestrian suffered very serious injuries requiring weeks of hospitalization and additional outpatient rehabilitation. The incident is caught on surveillance camera. The vehicle should be available for inspection upon request. The vehicle has not been inspected.

I have had the seal between the transmission and transfer case replaced 3 times due to leaking since new and after each repair within miles of each repair and all prior to the vehicle reaching 50,000 miles. The last time it was repaired at 65,000 miles they decided to replace the transmission with a new transmission - it also leaked between the transmission and transfer case within 1 day and less than 100 miles.

Every month I am receiving a check engine light for abs / traction control / failure. Dealer states HPU unit is bad, however I noticed all the fuses in the fuse box were loose. I pushed them in to reseat and the error cleared. This happens monthly. This last time happened during a snow storm and disabled abs.

***1*** The emissions system on this truck (2022 Ram 3500 with 34,435 miles) has been problematic since I acquired it 5 months ago. It continually attempts to regenerate and rid itself of ash/soot buildup. If it does not successfully regenerate, it will go into a state of reduced power, also known as limp mode. The truck is available for inspection and will be at Lithia CDJR in Corpus Christi tomorrow, 07 Jan 2026. ***2*** Today specifically, the truck flashed a message EXHAUST FILTER NEARING FULL SAFELY DRIVE...

The contact owns a 2022 Ram 3500. The contact stated that while driving at various speeds, the vehicle hesitated to accelerate while the accelerator pedal was depressed. The check engine warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed; however, the cause of the failure was not determined. In addition, the contact stated that the vehicle was taken to the same dealer approximately eight times, and a loaner vehicle was provided; however, after several unknown repairs, the failure reoccurred. The vehicle was previously repaired under warranty. The manufacturer was made aware of the failure. The failure mileage was approximately 2,000.

The # 4 cam bearing seized to the camshaft. Upon further investigation the #4 main bearing was damaged from metal chips that were not removed during the manufacture of the engine. This damage from the manufacturing defect left the engine block damaged beyond repair. So a short block was ordered and installed.

Lifter tick issue on 2019 to 2024 ram 6.7 engines ....lifters failing casuing excessive wear on valve train known issue major costly repair

My pm sensors or particulate matter system malfunction and failed which lead to emissions issues and created my vehicle to drive in limp mode. Limp mode basically slowed downs the vehicle is slow as 5 mph as soon as this light displays at any time while driving on the highway. This put my safety in danger and the public as I transport what dot considers a type hazardous material. The sudden loss of power in the middle of the road has made vehicles around me extremely vulnerable to fatal collisions. I took my vehicle to the dealership where they confirmed this malfunction and problem with my vehicle but no recall has been issued as of yet no warning lamps appeared prior to the failure.

The contact owns a 2022 Ram Promaster 3500. The contact stated that while driving approximately 60 MPH, the steering wheel malfunctioned and jerked out of his hands and became difficult to turn in either direction. The vehicle was taken to the local dealer who diagnosed that the steering rack and steering rack wiring harness was faulty and needed to be replaced. The steering rack and steering rack wiring harness were replaced, and the vehicle was repaired. The contact stated that the vehicle had previously experienced the failure, and the steering rack wiring harness was replaced, but the failure reoccurred. The manufacturer was not yet contacted. The failure mileage was 60,910.