Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Acceleration & cruise control

2022 Ram Promaster Acceleration problems

Owners have filed 6 complaints about the 2022 Ram Promaster's acceleration & cruise control with NHTSA - 9% of all its complaints, most recently on September 26, 2024. Unintended acceleration, surging, throttle problems and cruise or adaptive cruise faults.

Complaints
6
Recalls
0
Crashes
0
Fires
0
Injuries
0
Deaths
0

Acceleration complaints

Acceleration & cruise controlDriver assistance

While cruising at highway speed with adaptive cruise control enabled, the vehicle will incorrectly detect traffic/speed signs and will rapidly decelerate on a highway in traffic. I believe that the message that displays after detecting the new speed limit (improperly based on a sign other than a highway speed limit sign) without giving the option to reject using the "resume" button before. There is an option to disable traffic/speed sign detection, but that must be manually disabled in software every time the...

Read the full complaint

vehicle is re-started. Adjustment of the speed during adaptive cruise control based on traffic/speed signs should be disabled for safety. It's fine to have the speed limit displayed on the dash, but dangerous to have the vehicle adjust speed on its own without sufficient warning, or at all. I would like to request that RAM be directed to disable the software connection between traffic/speed sign detection and the adaptive cruise control so that, just like regular cruise control, the operator chooses the vehicle's speed. Note that this issue has happened many times since I've owned the vehicle, which was purchased as new, but I am now complaining to NHTSA because I experienced multiple incidents on my most recent trip that might have risked a rear-end collision from a vehicle following me when deceleration occurred.

Filed Incident Vehicle speed control · Forward collision avoidanceNHTSA 11616616
Acceleration & cruise controlDriver assistance

When driving on a freeway or highway, without cruise control on, & the pavement surface changes color &/or texture (eg: going onto a bridge/overpass) the vehicle will decelerate quickly & without us pressing the brakes. All the systems were checked by Dodge Ram & were showing no errors with software etc, as we thought this was traction control not working properly due to a software problem etc.

Filed Incident Vehicle speed control · Forward collision avoidanceNHTSA 11545427
Acceleration & cruise controlDriver assistance

When using Adaptive Cruise Control (ACC) with Traffic Sigh Assist (TSA) engaged (the default) on an interstate or other high speed road - for example the current highway speed limit is 65 and the ACC maximum speed is also set at 65 MPH, the TSA (wrongly) detects a much lower speed limit, say 25 MPH, the system flashes a warning AND AUTOMATICALLY APPLIES THE BRAKES without allowing the driver to respond to the warning message. According to the user manual, what is supposed to happen, is that the TSA warning...

Read the full complaint

message displayed on the dash says "new speed limit detected" and SUGGESTS that the driver can accept the detected speed limit as the new ACC maximum speed by pressing the RES resume button on the the steering wheel. If the driver does not respond, the ACC max speed stays as set. This is seriously dangerous! imagine going 65 MPH in heavy traffic and suddenly, unexpectedly the brakes are applied so violently that the vehicle skids and swerves out of its lane. This has happened multiple times to me. I believe this is caused by 2 problems: 1 The TSA wrongly detects a significantly lower speed limit sign. I don't know for sure but I guess it might "see" a sign on an exit ramp or parallel service road. 2 The vehicle automatically sets the new TSA speed as the ACC top speed and automatically applies the bakes instead of allowing the driver the option of setting the new speed limit by pressing the RES button. I have spent the last week trying to report this to the RAM dealer and Customer Care but they don't seem to be very responsive. They say I should schedule and pay for a diagnostic session but they have no openings until mid-January. Even if I took it in, I doubt the diagnostics would show anything because this is most likely a software issue. It would also be difficult to duplicate on local roads. I do know another person who has reported this same problem on YouTube and is able to recreate it as detecting a speed limit sign on a parallel service road.

Filed Incident Vehicle speed control · Forward collision avoidanceNHTSA 11495877
Acceleration & cruise control

The text coincides with this video I made. Here is its URL. https://youtu.be/hpA-Dw_-ihY This is my second time reporting this issue. My first report was comprised of just text. I was told that a video would be more helpful. The issue follows: Periodically when I have been using Adaptive Cruise Control the van will automatically, harshly apply the brakes in the middle of the highway. It took me a while to figure out what was happening. It has to do with Traffic Sign Assist which is enabled by default. When...

Read the full complaint

the van detects a speed limit sign that is at a speed limit slower than what I am traveling, a message appears on the dash that says "New Speed Limit Detected. Press "Res" to Reject" This is the opposite of the way the owners manual says Traffic Sign Assist should work. The owner's manual says when a new speed limit is detect the user will be given the OPTION to accept the new speed. The manual says, if the user does not accept the new speed the vehicle will continue as it was. It will not apply the brakes. The consequence of the way it is implemented in my van is that if you do not see the message (because your eyes on the road) the van will AUTOMATICALLY apply the brakes. I have had it happen when traveling 65 mph and encountered a 25 mph speed limit sign at an exit. It only occurs with white speed limit signs. A 45 MPH speed limit sign appears on a service road at time :16. Just as the speed limit passes out of my FOV the message appears on the dash and the brakes are applied when I do not press "Res" to reject the new speed limit sign. Each of the times it happened in this video, first when it encountered a 45 mph sign and later when it detected a 55 mph, I was not expecting it. If you zoom into the video, or the attached picture, you can see the message.

Filed Incident Vehicle speed controlNHTSA 11493375
Acceleration & cruise controlDriver assistance

Is intelligent speed assist implemented backward in the new Ram Promaster 3500? I attached a screenshot of the owners manual page describing how it should be working. I have experience several instances of the van automatically slamming on the brakes when traveling down the highway when the van recognizes a 25 mph speed limit sign for an off ramp. I have not been the only one. There are other posts about similar situations on the Ram Promaster Facebook page. I have a 2023 Solis 59PX that is built on the (new)...

Read the full complaint

2022 Ram 3500 chassis. My Promaster happened to come with adaptive cruise control. This post is regarding the implementation of the intelligent speed assist feature which can automatically adjust the max speed of the van based on traffic signs it recognizes. The manual says that "the message in the instrument cluster display will indicate the new detected speed limit by suggesting the driver to press "RES" to accept it." Where the manual says the instrument panel prompts the user to press a button to accept the suggested speed, I recall my instrument panel requiring me to press a button to dismiss the accepted speed. If I didn't see the prompt to dismiss the new speed, I recall the van automatically changing speeds. I recall mine switching speed on several occasions, automatically, without having to press anything, which resulted in some dangerous moments when traveling 65 MPH on the highway and the van detecting a 25 MPH sign for an off-ramp and slamming on the brakes. I am wondering if it is implemented backward in my van. I recall it saying "dismiss" where the manual says it should say "accept". The manual describes the system working in a way that makes more sense to me and is opposite of the way I recall mine working. In the manual it describes the system making a suggestion to change based on the sign but requires user input to actually accept it. There are several posts about the same thing on the RamPromaster Facebook page.

Filed Incident Vehicle speed control · Forward collision avoidanceNHTSA 11492218
Acceleration & cruise controlDriver assistance

Speedometer units and units used to set cruise control randomly change from MPH to km/h occasionally when the vehicle is started. No safety risk. Problem has occurred multiple times but dealer was not able to reproduce. There are no warning lamp associated with this issue.

Filed Incident Vehicle speed control · Forward collision avoidanceNHTSA 11486078

Ram Promaster acceleration complaints by year

Promaster acceleration problems, every year

Had a acceleration problem with your 2022 Promaster? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience