Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
On certain passenger vehicles, the fuel tank check valve, located in the fuel tank inlet pipe, may become separated from the inlet pipe and fall into the fuel tank. If the check valve falls into the tank, fuel may spill from the fuel inlet pipe when the fuel...
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
On certain passenger vehicles equipped with 2.5 And 2.7 Liter v6 engines, the crankshaft position sensor (ckp) cases did not meet dimensional specifications.
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
On certain vehicles, the electrical connector for the driver air bag may come loose. If the connector comes loose, the supplemental air bag warning light flashes intermittently.
On certain school and transit buses built with bosch zero offset pin slide (zops) hydraulic disc brakes, the zops hydraulic disc brakes may experience calipers sticking in the applied position, which can result in excessive or abnormal heat generation at one...
On certain transit buses equipped with detroit diesel series 50 engine configurations, a hydraulic motor used to drive the engine cooling fan motor has two hoses connected to it, including a high pressure input hose. The high pressure hose is constructed...
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105,"Hydraulic and electric brake systems." The brake system warning indicator may not function as required by the standard.
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
On certain motorcycles, the mirror stem could fracture allowing the mirror to fall.
On certain recreational vehicles built on gm gmt610 rv chassis, due to a change in the fuel system of these chassis, increased pressure results in the fuel return line. The fuel return line is used to provide a fuel tap for generators and auxiliary engines.
On certain 1998-2002 35' and 40' buses and 1999-2002 29' buses, the installation of the air conditioner unit uses bolts along the edge of the housing for attachment. One specific bolt can be too close to the main power cable attachment. Positional tolerance...
On certain school bus warning lamps, a static electricity discharge can occur during normal services or handling. This discharge can potentially initiate a chemical reaction of materials within the lamp which could cause the lens to fracture.
In some of these sport utility vehicles, the diameter of the steering column intermediate shaft is too small.
On certain model d30b motor homes built on a ford chassis, a plate, which is used to support the spare tire, was inadvertently left off a number of these motor homes.
Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "Hydraulic and electric brake systems." The brake system warning indicator may not function as required by standard.
Certain passenger vehicles fail to comply with requirements of federal motor vehicle safety standard no. 209, "Seat belt assemblies." The left and right front seat belt buckle/latch assemblies were improperly manufactured.
On certain mini vans, passenger and sport utility vehicles, some of these vehicles have a driver's side air bag that may not deploy as designed. In addition, the air bag inflator could rupture.