On certain medium duty trucks, the drive shaft connecting the transmission to the rear differential is comprised of two or three individual sub-sections bolted together. One end of each individual sub-section contains a flange yoke supporting a universal...
Updated daily from NHTSA
Latest vehicle recalls
41 recalls announced in the last 30 days. Newest first - each one shows the problem, the risk, the free fix and every vehicle it covers.
On certain pickup trucks and sport utility vehicles, vehicles, during a 30 degree left angle frontal impact of sufficient severity, a tear could develop in the mid-frame cross member at its attachment to the left frame rail. If the mid-frame cross member...
On certain "sportwagon" travel and fifth wheel trailers, the screws used to attach the lift bed support bracket to the wood bed frame are too short.
Certain pickup trucks fail to conform to federal motor vehicle safety standard no. 212, "Windshield mounting." Some of these vehicles lack a continuous urethane bonding bead between the body surface and the windshield.
Certain 2-door convertible passenger vehicles equipped with the tiptronic (automatic) transmission may have been produced with an incorrectly adjusted key-lock-cable down to the shift selector. If the key-lock-cable is not adjusted correctly, it is possible...
Certain mini vans fail to comply with the requirements of federal motor vehicle safety standard no. 209, "Seat belt assemblies." The second and third seat belt buckle anchor bolts do not comply with the standards.
On certain mini vans, some fuel tanks have surface imperfections that could allow fuel to leak from the tank.
On certain passenger sedans, the power circuit which feeds the direction indicator system could fail. This could result in the driver being unaware that the external turning indicators are not operating because the internal "tell-tail" light on the driver's...
On certain full pull trailers equipped with bendix sr2, sr-4, and sr-5 trailer spring brake valve assemblies, the molded rubber face of the inlet/exhaust valve (i/e valve) component of the affected valves can separate from the valve metal insert. Air can be...
On certain motor homes equipped with caterpillar 3126e hydraulically controlled electronically actuated unit injected diesel engines with high efficiency pumps (hep8). The pump components may experience a high pressure seal failure which can result in a...
On certain motor homes equipped with caterpillar 3126e hydraulically controlled electronically actuated unit injected diesel engines with high efficiency pumps (hep8). The pump components may experience a high pressure seal failure which can result in a...
On certain passenger vehicles, if an owner changes their wheels/tires between summer and winter using a steel wheel in the winter and an alloy wheel in the summer, it is possible for rust and contamination to build up on the wheel hub during the steel wheel...
On certain sport utility vehicles, it may be possible for the front brake line to slip out of the retaining bracket located at the front strut. The brake hose that is attached to the brake line could come in contact with the tire and be subjected to wear...
Napa and carter replacement fuel pumps manufactured by otd, inc., And distributed by federal mogal, may have an improperly installed check valve. The part numbers of these pumps are p74697m and p74708m. They were manufactured between july 15 and 27, 2002...
On certain fifth wheel trailers equipped with an upper deck pin box, the front section of the upper deck at the pin box area has a problem with excessive flexing.
On certain motor homes equipped with caterpillar 3126e hydraulically controlled electronically actuated unit injected diesel engines with high efficiency pumps (hep8). The pump components may experience a high pressure seal failure which can result in a...
On certain sport utility vehicles equipped with 2.7 Liter v-6 engines, improperly manufactured crankshaft position sensors (cps) were installed. The cps cases were improperly manufactured and did not meet dimensional specifications. Internal gaps within the...
On certain coaches, the front and rear coach doors are not marked as an "emergency exit."
On certain buses equipped with hydraulic brakes, the master cylinder was damaged during the fill and bleed procedure.
On certain 38' and 40' motor homes, an insulated foil heat shield, applied above the engine turbo exhaust in the engine compartment at the rear of the motor home to defect heat, may detach from the surface.