Latest vehicle recalls

Vehicle description: passenger vehicles. The speed control deactivation switch can develop a resistive short in the electrical circuit that could potentially result in an underhood fire. A fire is possible both when the vehicle is running and when the...

Vehicle description: passenger vehicles. If the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude.

Vehicle description: motor home coaches equipped with ridewell following tag axles. The ridewell following tag axle locking cylinders can allow the tag axle to off-steer, causing a rear end oversteer problem.

Vehicle description: sport utility vehicles. The right front brake line to the hydraulic control unit (hcu) connection could separate causing the line to leak when the brake pedal is applied.

Vehicle description: trailers equipped with aftermarket aluminum dual wheels, 22.5X8.25, One-piece, tubeless, supplied by accuride/akw. Certain design revisions combined with process conditions caused fatigue cracks in these wheels.

Vehicle description: motor homes equipped with ridewell tag axles. The ridewell tag axle caster control arm bolts can back out of the nut securing it, allowing the tag axle to move out of alignment.

Vehicle description: fire trucks. These fire trucks are all 4-door models which contain dual, forward facing passenger seats. The hardware utilized to mount the seat box to the cab floor and to the backwall structure, and also to mount the type 1 seat belt...

Vehicle description: passenger vehicles. These vehicles do not comply with the requirements of fmvss no. 214, "Side door strength." Incorrect position of the side impact pad to the rear, instead of the middle, of the door assembly.

Vehicle description: passenger vehicles. Certain vehicles were manufactured with ball joints that can prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.

Vehicle description: passenger vehicles. Certain vehicles were manufactured with ball joints that can prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.

Vehicle description: heavy duty trucks equipped with meritor air brake automatic slack adjusters. Some of the automatic slack adjusters had insufficient torque applied to the guide pawl cap screw.

Equipment description: accessory driver-side floor mats used in 1996-1998 honda civic vehicles. Due to the shape of the floor on these vehicles, a mispositioned floor mat could interfere with the accelerator pedal.

Vehicle description: sport utility vehicles. The left side and right side instrument panel wiring ground attachment screws could loosen over time.

Vehicle description: mini vans built for fleet sales only. The headlamp module does not identify the park lamp as "drl" as requirement of fmvss 108, "lamps, reflective devices, and associated equipment."

Vehicle description: pickup trucks equipped with manual transmission, v10 engines and four-wheel-drive transfer cases. Under sustained maximum rated vehicle load, while driving up a steep grade in four-wheel-drive low range in hot ambient conditions, the...

Vehicle description: passenger vehicles. The front suspension lower control arms may have been inadequately welded between the pivot tube and the arm.

Vehicle description: mini vans. The wiring that initiates the driver and/or passenger air bag could electrically short circuit to ground. A short circuit to ground that exists immediately after turning the ignition key to the "on" or "start" position can...

Vehicle description: heavy duty trucks equipped with hydraulic brakes. The hydraulic brake tube to the front left brake can contact the bottom frame rail flange.

Vehicle description: motor home chassis. These vehicles do not comply with the dash light intensity requirement of fmvss no. 101, "Controls and displays."

Vehicle description: passenger vehicles. Moisture can enter the air bag inflatable restraint electronic control module (ecm) and cause corrosion on portions of the ecm printer circuit boards.