Latest vehicle recalls

Vehicle description: passenger vehicles. If the engine backfires during a cold-start, an air screen which is loosely seated in the air flow meter can become damaged.

Vehicle description: heavy duty trucks equipped with aftermarket aluminum dual wheels, 22.5X8.25, One-piece, tubeless, supplied by accuride/akw. Certain design revisions combined with process conditions caused fatigue cracks in these wheels.

Vehicle description: passenger vehicles. The torque on the power steering column nut is insufficient.

Vehicle description: passenger vehicles built with 3.3L engines. The 'o-rings' used to seal the interface of the fuel injector rail supply, return and cross over tubes are not as robust as those used in later model years. Deterioration of the 'o-rings' can...

Vehicle description: mini vans. These vehicles may have (1) a broken shift cable fitting or (2) loose shift linkage. Consequently, moving the shift lever to a 'park' position may not shift the transmission to 'park'.

Vehicle description: heavy duty trucks equipped with caterpillar 3406e engines. The routing of the electrical and fuel lines can cause chaffing of the wiring harness on the fuel line.

Vehicle description: passenger vehicles. Lockup of the transfer case can occur due to insufficient lubrication.

Vehicle description: passenger vehicles, also service parts supplied to subaru dealers are involved (lot numbers f01 j21d2, f01 j30d2, f02 j09d1, f02 j09d2, and f02 j20d1). The purolator oil filter cans used on these vehicles can fracture causing a...

Vehicle description: platform trailers and dollies. The tubing installed in the air brake system on the platform trailers was not recommended for use with the tubing fittings used in the air brake system and the tubing installed on the dollies does not have...

Vehicle description: trailers equipped with meritor rhp suspensions. These trailers exceed the brake actuation and release requirements of fmvss no. 121, "Air brake systems."

Vehicle description: school and transit buses equipped with 2-piece, no5x7508 tilting steering column, or no5x710 telescopic and tilting steering column. The upper pinch bolt nut was omitted during the assembly process. If the nut was not installed, the...

Vehicle description: medium duty trucks and chassis-cabs. One or more of the four rivets on the lower steering shaft flex coupling may not have been crimped during the sub-assembly process.

Vehicle description: trucks, school buses and transit buses equipped with an optional automatic transmission shift lever that includes a park brake position. The transmission shifter/park brake lever can bind before fully engaging in the park brake...

Vehicle description: dual rear wheel school buses built on ford e-350 and e-450 'super duty' cutaway chassis, exterior body width of 80", gross vehicle weight rating of 11,500 or 14,050 pounds. These buses may have a modification to the frame rail...

Vehicle description: heavy duty trucks equipped with prosleeper bunks. A micro relay located behind the hvac control panel in the bunk can corrode from moisture.

Vehicle description: trailers equipped with antilock braking system (abs) electronic control units (ecu) for over-the-road trailer applications. The cover seal (o-ring) may have been improperly installed in certain easy-stop trailer abs electronic control...

Vehicle description: passenger vehicles. Inadvertent deployment of the air bags can occur due to water intrusion.

Vehicle description: heady duty trucks equipped with 36" rear brake chambers. The brake system does not meet the air reservoir volume requirement of fmvss 121, "air brake systems."

Vehicle description: sport utility vehicles. The strength of the rear seat belt shoulder anchorage is not to design specifications and does not fully comply with requirements of fmvss no. 210, "Seat belt assembly anchorages."

Vehicle description: passenger vehicles. The ignition switch can crack and cause electrical failures.