Chrysler (FCA US LLC) is recalling certain Mopar Stage 1 Kit Performance Packages Powertrain Control Modules (PCM) Part Numbers P5160023, P5160025, and Demon Crate PCM Part Number 68412287AA. The PCMs are being recalled to address a defect that could prevent...
Transmission & drivetrain
Chrysler 300 Transmission problems by year
1,168 complaints filed with NHTSA about the Chrysler 300's transmission & drivetrain. Harsh or delayed shifting, slipping, CVT shudder, rollaway, axles, driveshafts and transfer cases.
Transmission complaints by model year
Transmission recalls
Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
Chrysler (FCA US LLC) is recalling certain 2014-2017 Dodge Charger and Chrysler 300 vehicles equipped with all-wheel drive (AWD). The front driveshaft bolts may loosen and allow the front driveshaft to disconnect, potentially causing a loss of motive power.
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Dodge Charger and Chrysler 300 vehicles manufactured February 15, 2011, to November 27, 2014, and 2014-2015 Jeep Grand Cherokee vehicles manufactured July 16, 2012, to December 22, 2015. The...
Chrysler Group LLC (Chrysler) is recalling certain model year 2013 Chrysler 300 AWD, Dodge Charger AWD, and Dodge Ram 1500 4x4 vehicles equipped with ZF all wheel drive ("AWD") 8HP45 transmissions. In the affected vehicles, the transmission output shaft may...
Chrysler is recalling 5,509 my 2008 300, dodge magnum, and charger vehicles. The torque retention crimp feature was missed during the manufacture of one lot of rear axle hub nuts. This could cause the nuts to loosen and allow the halfshaft to disengage...
On certain passenger and sport utility vehicles and pickup trucks equipped with automatic transmissions, the software programmed into the powertrain control module can cause a momentary lock up of the drive wheels if the vehicle is traveling over 40 mph and...
On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. If the shaft moves out of position, the vehicle may not be able to...
Latest 300 transmission complaints
Drivetrain axle fell off as I was driving down the road cause by defected bolts on prepeller The front propeller shaft may have bolts that were not fully tightened to the proper torque specification during vehicle assembly. Front propeller shaft bolts that are not fully tightened may allow the front propeller shaft to become loose and disconnect from the vehicle. Front propeller shaft bolts that are not fully tightened may be detectable due to noise and vibration. If the front propeller shaft disconnects from the vehicle, it may result in damage to powertrain and underbody components and may lead to loss of motive power which could cause a crash.
Vehicle received passenger airbag inflator recall service at Viva CDJR in El Paso, TX. The dash disassembly disturbed adjacent wiring/BCM connections, and after driving, vibration caused a short/ground fault, creating runaway wipers, A/C failure, transmission limp mode, check engine and power steering lights while in transit. Dealer has kept the car for over two weeks and refuses to scan diagnostic trouble codes or inspect the recall-adjacent wiring harness. The vehicle has never experienced this issue prior to the recall service.
The vehicle was sold with an outdated battery and later experienced repeated breakdowns. During the first repair visit, the dealership replaced the battery and alternator but failed to identify the root cause of the problem. The vehicle was returned, but the next day it broke down again. Upon inspection, it was discovered that the wiring harness was severely burnt and melted, creating a significant safety hazard that could cause stalling, fire, or total electronic failure. The dealership later diagnosed a PCM...
Read the full complaint
failure, which was not detected during the first repair visit. The wiring damage and PCM issue were not disclosed to the vehicle owner by the dealership, and there was no explanation provided for the cause. The problem has been confirmed by the dealership during the second visit, and photographs of the wiring damage are available. The electrical system and engine control were compromised, placing the driver and others at risk of sudden vehicle failure while driving.
Vehicle experiences sudden Auto-Park engagement, hard shifting, and loss of gear engagement. Code P0700 present. Issue began after A/C compressor failure. Safety risk includes sudden deceleration and loss of control."
The contact owns a 2007 Chrysler 300. The contact stated that while driving at 70 MPH, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The contact was able to coast to the side of the road. The contact's granddaughter was a passenger in the vehicle. The check engine warning light and the Electronic Throttle Control warning light were illuminated. The contact was able to restart the vehicle. The contact stated that the engine revved abnormally, and the vehicle started to move...
Read the full complaint
forward independently. The contact depressed the brake pedal to the floorboard. The contact used force to depress the brake pedal. The contact stated that after a while, the vehicle returned to function as intended; however, the failure persisted. The contact stated that while the vehicle was stopped at a traffic light or stop sign, the brake pedal and accelerator pedal needed to be simultaneously depressed. The vehicle was taken to the dealer, where it was diagnosed, and determined that the PCV vacuum hose had failed. The vehicle was repaired; however, the failure persisted. The contact's brother inspected the vehicle and noticed that the PCV vacuum hose was not connected to the upper intake manifold and that the hose had a two-inch split at one of the ends of the hose. The contact's brother reconnected the hose. The contact stated that the dealer was supposed to have replaced the hose. The failure was progressively worsening, and the vehicle was no longer being driven. The manufacturer was notified of the failure via certified mail. The failure mileage was 174,862.
https://www.nhtsa.gov/?nhtsaId=11535069
My car threw itself in neutral twice in the highway going home.
Just had this problem on my 2019 Chrysler 300. Recall came years after I had it and after I sold it. I got lucky and found out and got a reimbursement for the repair. Recall issued for "faulty Diode on Alternator". Very dangerous b/c the car will just cut out on you when you are trying to accelerate... like crossing a road etc. My 2019 I didn't have long enough to see if it was an issue but now my 2023 Chrysler 300 is doing the same thing. Would not surprise me if it's the same faulty parts for every model. ...
Read the full complaint
When you accelerate it just putters and loses power. My 2019 I got reimbursed on it had white smoke and ended up burning out another $1000 of electronics that I did NOT get reimbursed for. It's one of those things Idk if they can detect it until it breaks or not.
there is a recall out on chrysler 300c 2017 for bolts to be replaced on drive shaft im experiencing issues with this you have my vin and i would like this taken care of also another recall is on drivers side door inside pannel it bumps up and needs to be replaced as well i need these done there are also more out there pls put these in system so i can take to sealer any question please call me or email me [[redacted]] [[redacted]] [[redacted]] vin number [[redacted]] 2017 chrysler 300c INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
There a problem with car stalling and dying because of power being lost to tcm because of tipm. Dealer had my car for 7 weeks and $1900 changing tcm and problems still exist. Didn't even make 10 miles from dealership. Very dangerous
There were 2 separate incidents that occurred. The first one we were backing out of our driveway and the car just stopped running. We were unable to start it again after a dozen attempts. We had the vehicle towed to a local shop and when they got in the car, it started right up. We drove it around for a few weeks before the 2nd incident happened. We were driving on the freeway this time and the car just stopped running. We were in the fast lane and it was extremely dangerous to get off the side of the road...
Read the full complaint
due to heavy traffic. It again would not start and we had to have it towed home. Once it came off the tow truck, it started up. Something about it getting towed makes it start again, maybe the angle that it is in when it is getting pulled up on to the tow truck does something. I've been nervous to drive it for fear it will break down on me again. We have tried to start it again to take it to a service shop but it will not start. There were no warning lights before either incident. The first shop we had it towed to informed us after we dropped it off that the car was too new for them to run for codes, so they were unable to tell us the issues.
There was a recall on this vehicle in 2018 for a Powertrain Control Module or PCM. The problem has arisen again. How do I correct this issue
Chrysler Model 300s Vehicle, 2018, repair service by an authorized Chrysler dealer in Puerto Rico, certified the replacement of original manufacturer parts of the power steering (Rack-Pinion) on three occasions, which does not accept the programming of technical support by the automotive specialists of the authorized Chrysler repair shop. It is evident that this vehicle faces a hidden problem from the manufacturer which had not been detected until now. Diagnosis could not replace the part because the programming...
Read the full complaint
defect by the manufacturer was not found. It is important to start an investigation into the power steering known as (Rack-Pinion), it is working correctly for the driver's safety to drive safely on the roads without this defect, which could not be corrected by the automotive technicians authorized by Chrysler in Puerto Rico, causing an accident. AUTHORIZED WORKSHOP: BELLA RETAIL GROUP LLC. D/B/A FLAGSHIP CHRYSLER, Flagship, EXTENDED INSURANCE POLICY: PREMIER INSURANCE COMPANY
This is a serious safety concern regarding the shift interlock system on my 2005 Chrysler 300. When the vehicle is in Park, particularly in traffic, and the light turns green, I am forced to lift the coin attachment and manually press the pink interlock just to change gears or accelerate. This creates a dangerous situation where I am unable to move the vehicle promptly, potentially leaving me vulnerable to a rear-end collision. The issue stems from Recall 05V462000, which specifically addresses a shift interlock...
Read the full complaint
defect that Chrysler has failed to address despite my repeated attempts to have it repaired. Chrysler has not taken any action to resolve the recall issue, leaving me in a potentially life-threatening situation every time I drive. It is unacceptable that this recall has not been acted upon, and this critical safety defect must be corrected immediately.
Unknown, but based on what I've read and seen others describe happen to them I would say it's somehow connected to the park assist. But my battery loses voltage while driving, the car will start blowing hot or cold air which ever it prefers at the time without any heating or cooling system being turned on, the dash goes crazy the rpms, speedometer and everything else will drop to zero the transmission will start jerking and the service park assist warning will flash on and off repeatedly very fast then the car died...
Read the full complaint
while driving on the highway and refused to start even with a jump start. Replaced the battery twice in 2 weeks and the alternator as well and the car continues to do this randomly. No codes show up but the abs light, esp bas lights are on, the brake light will come on every now and then without the brake being pressed and the car seriously just seems to have a mind of it's own.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data