Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Suspension

2000 Chrysler Cirrus Suspension problems

Owners have filed 7 complaints about the 2000 Chrysler Cirrus's suspension with NHTSA - 7% of all its complaints, most recently on June 2, 2021. They describe 1 crash, 0 fires and 0 injuries. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.

Complaints
7
Recalls
2
Crashes
1
Fires
0
Injuries
0
Deaths
0

Suspension recalls for the 2000 Chrysler Cirrus

Suspension: lower arm

10E05900022,689 vehicles affected

The problem
Federal-mogul is recalling certain replacement control arm assemblies, part numbers k7425, 10945, fa4510x, k7427, 10946, and fa4611x, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.
The risk
If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.
The fix
Federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on january 28, 2011. Owners may contact federal-mogul at 1-877-489-6659.

Suspension: lower ball joint

09E0560005,787 vehicles affected

The problem
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. The affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. The g10945 and g10946 are the same part as the d10945 and d10946 respectively. They are labeled differently depending on the aftermarket customer.
The risk
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
The fix
Qualis automotive will replace the ball joints free of charge. The safety recall began on november 9, 2009. Owners may contact qualis automotive at 1-800-493-4128.

Suspension complaints

SteeringSuspension

The contact owns a 2000 Chrysler Cirrus. The contact stated while driving at various speeds, the steering wheel would shake and the vehicle was difficult to keep in the lane. Additionally, there was an abnormal sound while driving over bumps in the roadway. The vehicle was taken to an independent mechanic who diagnosed that the ball joints were faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 52,000.

Filed Incident Steering · SuspensionNHTSA 11419411
SteeringSuspension

Car has been making front end noise for about 4 days before the ball joint breaking completely cause the axle to remove and break also vehicle needs fixed asap call me at [[redacted]]. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr

Filed Incident Steering · SuspensionNHTSA 10713678
Suspension

The lower ball joint is very loose and making alot of noise. There was a recall for lower ball joint failure for this car. Don't understand why my car is not part of the recall. *Tr

Filed Incident SuspensionNHTSA 10704624
SteeringSuspensionCrash

While driving my son home from school, my 2000 chrysler cirrus became disabled due to the right side ball joint snapping off the control arm. I had to get my veichle towed and had to replace the right ball joint , the right control arm and also the right side axle. I only own this car 6 months ( 1825 miles) and this was the 2nd major repair I had with this veichles steering conponents ( rack & pinion assy and power steering pump). I found on another website that there is a recall for the control arm:lower ball joint recall id #79830 . Can you please help with this problem or lead me in the right direction. Thank you! *Tr

Filed Incident Steering · SuspensionNHTSA 10446713
SteeringSuspensionBrakesWheels & tires

Front disc brakes began making noise, mechanic checked and found the rotor surface was delaminating and informed me that this happens on all chrysler cirrus's they have worked on this year. This may answer some of the other complaints listed in this section. Also, the 15" wheels mounted on the lxi model cirrus's, take 14" brakes. The suspension on the lxi is only designed for the 14" wheels, due to this effort on chrysler's part to save money, the lxi owners are driving vehicles with incorrect suspension and wheels. This is on all chrysler cirrus vehicles, that is why there are steering, suspension and brake problems.*Ak

Filed Incident Steering · Suspension · Service brakes, hydraulic · WheelsNHTSA 764022
Suspension

After the car is driven for 30 or 40 minutes, a sharp tapping sound can be heard coming from the engine compartment. Some sort of "kick" can also be felt through the steering wheel. The longer the car is driven, the louder the sound and the more pronounced the kickback in the steering wheel, at times fairly violent. The taps/knocks occur as many as several times per second, then stop for a few minutes, then return. The occurrence is nonrotational (ie, happens at equal intervals whether at highway speeds or in a...

Read the full complaint

parking lot) and has nothing to do with road surface conditions. Chrysler technical service bulletin (tsb) 19-02-99 rev a, dated 10/99, describes this problem. I've brought the car to two chrysler dealers a total of four times, who mostly claim they can find nothing wrong. On one occasion, tenafly jeep... Claims to have replaced the steering column (part #4690543-am) under warranty pursuant to the tsb, but the noise and kick returned within the first 2 hours I drove the car on the highway. Note that the tsb applies to 69 different chrysler/plymouth/dodge configurations from 1995 to 2000. According to the dealership, the replacement steering column they installed carries the same part number as the old, meaning they continue to install known faulty replacement parts, perhaps hoping the car will be sold before the problem reappears. Bottom line: I'm stuck with a car the dealer won't fix under warranty and which I can neither sell (without disclosing the material defect) nor drive comfortably (i don't want to be killed when the steering assembly flies apart one day).*Ak

Filed Incident SuspensionNHTSA 762236
Suspension

While pulling out of driveway car veered to right, like consumer has lost control. Took vehicle to mechanic, and they can't find cause. *Ak

Filed Incident SuspensionNHTSA 889909

Chrysler Cirrus suspension complaints by year

Cirrus suspension problems, every year

Had a suspension problem with your 2000 Cirrus? Tell other owners.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience