Federal-mogul is recalling certain replacement control arm assemblies, part numbers k7425, 10945, fa4510x, k7427, 10946, and fa4611x, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the...
Suspension
Chrysler Cirrus Suspension problems by year
81 complaints filed with NHTSA about the Chrysler Cirrus's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.
Suspension complaints by model year
Suspension recalls
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under...
Vehicle description: passenger vehicles. The lower control arm ball joint can separate due to loss of lubrication.
Latest Cirrus suspension complaints
Air bags failed to deploy during wreck. Multiple both axle and wheel bearings failures
The contact owns a 2000 Chrysler Cirrus. The contact stated while driving at various speeds, the steering wheel would shake and the vehicle was difficult to keep in the lane. Additionally, there was an abnormal sound while driving over bumps in the roadway. The vehicle was taken to an independent mechanic who diagnosed that the ball joints were faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 52,000.
At first I heard a squeaking noise that gradually turned into a grinding noise. After having my brake pads replaced and front driver side caliper replaced, the grinding noise turned into a metal on metal grind with a peculiar metal smell which resulted in something ceasing up (only way to describe how tight the tires were rolling and how tight the steering was). It was the lower arm and ball joint separating from each other, all of this was discovered while driving down a city street at a speed of 20 mph, we were able to access the problem better when we jacked up the front end and removed the tire and brakes on the driver front side.
My front tires feel like they are going to break off the vehicle due to the lower ball joints,steering control arm, inner and outer tie rods; accelerates all by itself. Will not lock shifter with key out of ignition. Ecm is faulty because it shuts the lights off,turns engine,all lights, off . Unpredictably! Seat belts do not engage when stopping. If I were to be critically injured because of malfunctioning of said vehicle? Who would take responsibility of my safety and well being? This all happens while operation of vehicle. Traveling on the freeway at 55 mph. Abs malfunctions as well even when driving 15 mph. *Tr
Tl* the contact owns a 1998 chrysler cirrus. While driving 25 mph, the lower control arm fractured. The vehicle was towed to an independent mechanic where it was diagnosed that the lower control arm needed to be replaced. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure mileage and vin were not available.
Car has been making front end noise for about 4 days before the ball joint breaking completely cause the axle to remove and break also vehicle needs fixed asap call me at [[redacted]]. Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(B)(6). *Tr
The lower ball joint is very loose and making alot of noise. There was a recall for lower ball joint failure for this car. Don't understand why my car is not part of the recall. *Tr
While driving my son home from school, my 2000 chrysler cirrus became disabled due to the right side ball joint snapping off the control arm. I had to get my veichle towed and had to replace the right ball joint , the right control arm and also the right side axle. I only own this car 6 months ( 1825 miles) and this was the 2nd major repair I had with this veichles steering conponents ( rack & pinion assy and power steering pump). I found on another website that there is a recall for the control arm:lower ball joint recall id #79830 . Can you please help with this problem or lead me in the right direction. Thank you! *Tr
Tl* the contact owns a 1996 chrysler cirrus. The contact stated that the rear lateral link fractured, causing the rear driver side tire to fold inward while driving 10 mph. The contact did not take the vehicle to the dealer or local mechanic for repairs or diagnostics. The failure mileage was 118,000.
Tl* the contact owns a 1998 chrysler cirrus. The contact stated that when attempting a turn in either direction or parking, there was a loud, abnormal noise from under the vehicle. The vehicle was taken to two different dealers who repaired various components on the vehicle. The second dealer repaired most of the suspension including the tie rod. The manufacturer was not notified of the failure. The vin was unavailable. The failure mileage was 60,000 and the current mileage was 85,900.
Tl* the contact owns a 1996 chrysler cirrus. The contact stated that the driver was traveling 42 mph when the steering wheel became excessively loose. This made it difficult for the driver to maintain control of the vehicle. The vehicle independently veered off the road, and crashed into a electric pole, yet the vehicle did not stop. She then crashed into a second pole, jumped a creek and crashed into a tree as the vehicle came to a stop. The air bags did not deploy. The seat belts did not restrain the driver as...
Read the full complaint
she plunged into the steering wheel. She then exited the vehicle through the driver side window. The driver sustained injuries to the neck, shoulder, chest and a minor concussion. She also suffered short-term memory loss as a result. A police report was available. The manufacturer was contacted and advised that the vehicle was previously repaired under nhtsa campaign id number: 97v201000 (suspension: front: control arm: lower ball joint) which could potentially cause a loss of steering control. The contact was unaware that the vehicle was ever repaired in regards to the recall. The vehicle was destroyed. The failure and current mileage was approximately 180,000.
My car has been giving me problems their seems to be quiet some issues with the vehicle where would I take it if it has a recall on the vehicle. Brake problems some leakage somewhere under the hood. When I purchased gas it runs out very fast the suspension is acting up in the vehicle. *Tr
Tl*the contact owns a 1996 chrysler cirrus. While driving approximately 25 to 30 mph on normal road conditions; the front driver side tire disengaged from the vehicle. The contact was able to safely drive into the emergency lane. Roadside assistance towed the vehicle to the residence. An authorized dealer and manufacturer were notified of the failure. Nhtsa campaign id number 09e056000 (suspension; front control arm: lower ball joint) is related to the failure. The vin was included in the recall defect; however,...
Read the full complaint
the dealer refused to repair the vehicle per the recall remedy. The vehicle is inoperable and has been not repaired. The contact had concerns of the safety risk involved. The failure and current mileages were 100,000.
I have a 1997 jeep grand cherokee. It has the "wobble of death", so called due to its violent shaking of the front end. I have searched it online and found many cases of the same. I am aware that the vehicle is over 10 years old, but the manufacture has been well aware of the problem. The "wob" has affected vehicles as old as 1994. I am not sure if there is anything that can be done but I feel like I need to try. *Tr
The car started making a creaking sound in like the axles and then it became a grinding sound . We were driving down the road and the tire just came off we slid like 20 feet before coming to a stop. *Tr
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data