- The problem
- Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
- The risk
- An unsecured wheelchair can move during transit, increasing the risk of injury.
- The fix
- Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Vehicle safety record
2017 Chrysler Pacifica Problems, complaints & recalls
Owners have filed 1,547 complaints about the 2017 Chrysler Pacifica with NHTSA, most often about the engine & cooling (539) and the transmission & drivetrain (474). Those complaints describe 46 crashes, 11 fires and 37 injuries. It is covered by 11 recalls, the latest in December 2025 for the safety defect. For comparison, the 2016 has 2 and the 2018 has 902.
NHTSA data checked
FFar more problems than a typical Pacifica year, for its age
#3 most complained-about 2017 vehicle
- Complaints
- 1,547
- Recalls
- 11
- Crashes
- 46
- Fires
- 11
- Injuries
- 37
- Deaths
- 0
Most common 2017 Chrysler Pacifica problems
Share of all 1,547 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2017 Chrysler Pacifica recalls 11
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
- The risk
- An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
- The fix
- Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2019 Pacifica vehicles equipped with engine stop/start systems. A loose battery ground connection may result in an intermittent loss of power steering assist and/or a stall.
- The risk
- A loss of power steering assist or a stall can increase the risk of crash.
- The fix
- Chrysler will notify owners, and dealers will inspect the battery ground surfaces, clean the contact surfaces as needed, and properly reassemble the ground connection, free of charge. The recall began May 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. FCA US' number for this recall is V53.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
- The risk
- A vehicle stall can increase the risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles. The Manual Park Release (MPR) plug may be removed without a tool. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."
- The risk
- If the MPR is engaged unintentionally, the vehicle could roll away striking and injuring a bystander or cause a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the MPR plug, free of charge. The recall began July 9, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U50.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
- The risk
- If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017 Chrysler Pacifica vehicles equipped with a 3.6l engine. The engine control software may become out of sync with the crankshaft position sensor, possibly resulting in an engine stall.
- The risk
- An engine stall can increase the risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will update the engine control software, free of charge. The recall began March 7, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U01.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles equipped with the 8-passenger seating option. In certain passenger seating and vehicle situations, the second-row center seating position seat belt buckle could cause the left outboard seat belt to become unlatched.
- The risk
- Inadvertent unlatching of the left outboard seat belt can increase the risk of injury in the event of a crash.
- The fix
- Chrysler will notify owners, and dealers will install a shorter second-row seat belt buckle, free of charge. The recall began October 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T54.
- The problem
- Vantage Mobility International, LLC (VMI) is recalling certain 2017 Chrysler Pacifica lowered floor vehicles modified by VMI. The rear pinion bracket on both sides of the vehicle may crack, causing the axle not to be centered and the wheel to wobble.
- The risk
- A wheel wobble may cause a possible loss of control, increasing the risk of a crash.
- The fix
- VMI will notify owners, and dealers will replace the pinion brackets, free of charge. The recall began on August 14, 2017. Owners may contact VMI customer service at 1-800-488-9082. VMI's number for this recall is PAC20170728.
- The problem
- Vantage Mobility International, LLC (Vantage Mobility) is recalling certain 2017 Chrysler Pacifica lowered floor vans modified by Vantage Mobility for wheelchair accessibility. The affected vans have rear brake lines that might have been crossed during the modification. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
- The risk
- The crossed rear brake lines will cause the rear anti-lock brake system to be ineffective, increasing the risk of a crash.
- The fix
- Vantage Mobility will notify owners, and dealers will correct the rear brake line attachments, free of charge. The recall began on July 3, 2017. Owners may contact Vantage Mobility customer service at 1-800-488-9082. Vantage Mobility's number for this recall is Pac-20170525.
- The problem
- Chrysler (FCA US LLC) is recalling certain model year 2017 Pacifica vehicles manufactured February 22, 2016, through April 28, 2016. The center overhead seat belt stow clip may fracture and prevent use of the seat belt in the third-row and/or second-row center passenger seat (if so equipped).
- The risk
- If passengers occupying the third-row and/or second-row center seats cannot use a seat belt, there is an increased risk of injury in the event of a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the third-row and, if necessary, second-row center overhead seat belt stow bezel, free of charge. The recall began on July 14, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S42.
What owners say
4 people checked this vehicle in the last 30 days. Problems or none - your experience is exactly what the next buyer is looking for. Write it now
1,547 complaints about the 2017 Chrysler Pacifica
Newest first, as filed with NHTSA by owners. Page 3 of 62.
The electric power steering intermittently sticks when the steering wheel is returned toward center after a turn. When this occurs, the wheel does not return to center on its own and requires noticeably increased effort to move. When the resistance releases, the wheel moves abruptly. Our local mechanic at Ashburn Auto Care reproduced the issue and he described it as "violently snapping back" The vehicle is available for inspection upon request. This regularly occurs at over 35 mph or so on highway curves and...
Read the full complaint
off-ramps all and has happened approximately 20 times since I first noticed it in July of this year. It seems to occur most often when coasting to the right and then pulling back towards center. Several times, it has caused me or my wife to oversteer and requires us to quickly react in order not to hit another car or leave the road. This is a family vehicle that regularly carries children. No warning lamps or messages appeared before or during these events. There are no diagnostic trouble codes stored. The problem has been reproduced by our independent mechanic but no solutions were provided. Our next step is to visit the dealer but I wanted to document the problem here before I do.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed and approaching a red light, the vehicle stalled. The vehicle was pulled over to the side of the road, shifted into park, and shifted back into drive, and the vehicle returned to normal operation. The message "Shift into Park" was displayed on the instrument panel. The failure had occurred on several occasions. The vehicle was taken back to the residence. The contact researched and became aware of a recall; however, the VIN was not under recall. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 145,000.
The contact owns a 2017 Chrysler Pacifica. The contact stated that the steering wheel was sticking intermittently while turning, causing the steering wheel to overcorrect after being turned. The TPMS warning light was illuminated. The local dealer was not contacted. The vehicle had not been diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was 127,000.
The car has developed an unsmooth turning sensation that I noticed at highway speeds causing over / understeering curve turning. It is gradually becoming worse over the last few months, but it is not a daily driven vehicle, maybe once a week or so.
At speeds between 20-80mph, the steering wheel sticks while turning to the right. I have to force it to come back to center after the turn. It does not do this all the time but has become more frequent lately. As yet, it does not do this while turning to the left.
I have had this happen twice in the last few months, most recently in the last three weeks. I was driving on a 45 mph highway with the cruise control set at 49 or 50 miles per hour. On the most recent time, I was coming to a red traffic light and applied the break to slow down. However, the van kept going forward even though I was pressing the break pedal totally down. The van slowed somewhat, but the van kept going. I put the van in neutral and was able to stop, but the engine kept going, presumably at the...
Read the full complaint
speed set on the cruise control. I stopped the engine By putting the vehicle in Lo, which I believe shut off the engine. By that time I was partly in the intersection. Luckily I had no cars in front of me or behind me, and no one was crossing in front of me. Otherwise I would have had a collision. I called and made an appointment at my dealership, [[redacted]] on [redacted]. They test drove the van but couldn't duplicate the concern. According to the Invoice, they "Captured VSR No DTCS related to concern. Checked for sofware updates, None related to concern. Checked for SBS or star cases related to concern. None found." The summary concluded:" System is operating as designed at this time. Updated TCM, BCM and PLGM." I don't know what all of that means, but I think that they did a thorough inspection of my van and couldn't find out what was causing the Cruise Control to not shut off. I did some research online and I found that there were 2 recalls in 2018 for the 2017 and 2018 Chrysler Pacifica that appear to have attempted to correct this exact issue, but it showed that my vehicle, with my VIN, was covered by FCA Safety Recall U64, NHTSA 18V-332 and the recall status showed that my vehicle was "Repaired." Has anyone else had this problem, because this creates a very scary, dangerous event. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
I have been had intermittent loss of power steering during gradual turns and then suddenly it returns. Very dangerous situation!!
The steering is very sticky. Especially at higher speeds in curves. It is sticky most at the 11:00 and 1:00 spots on the steering wheel. It takes some strength to drive the car through mountains as it is difficult to make sure the wheel is moving correctly through the turn.
Periodically, the steering wheel will stick between the 11 o'clock and 1 o'clock position. The vehicle will not track back to center/driving straight and you have to overcome the sticking of the steering wheel. This is very dangerous!
Recently, in the last 2 weeks since the writing of this post, I've noticed a sensation when doing a gradual turn anywhere between 20-60 MPH, and the steering wheel is at the 11 or 1 o clock position, the vehicle "sticks". I then have to put force on the steering wheel to get it back to center and straighten out the driving path. This puts me and other drivers on the road in danger because it's extremely easy to oversteer and swerve off the road or into another driver, injuring or killing passengers. Although I...
Read the full complaint
have not taken this to a dealer yet, there are numerous articles online clearly stating this is a very dangerous issue-specifically with my 2017 model year. I see no warning lights that accompany this behavior. And that makes it all the more dangerous. Without any awareness of the issue, it's a lot more probable to experience the behavior and cause an accident.
My 2017 Chrysler Pacifica (VIN [[redacted]], approximately 99,880 miles) intermittently loses electric power steering assist while driving. The Service Power Steering warning illuminates and steering effort increases substantially. Assist returns on its own without restarting the vehicle. Failures correlate with extended driving and heat. I scanned the electric power steering module directly. It reports DTC C2217 (electric power steering module internal) and C2210 (ECU over-temperature), both stored and currently...
Read the full complaint
present. Live data captured at idle in park shows 7.98 Nm of driver steering input with 0.00 Nm of assist torque and 0 amps of system current draw, confirming assist was fully inactive. Battery voltage was steady at 14.1 to 14.2 volts throughout, ruling out a supply or ground fault. The module also reports an implausible internal temperature reading while drawing no current, indicating an internal electronics fault rather than a genuine thermal event. This is a non-hybrid, front-wheel-drive vehicle. Intermittent loss of steering assist at speed presents a crash risk. I am aware of investigation PE25009 covering the EPS system on 2017-2018 Pacifica vehicles INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While driving, the vehicle unexpectedly shut off without warning. The engine stalled while the vehicle was in motion, causing an immediate loss of acceleration and power and creating a serious safety hazard in traffic. This vehicle previously received the Safety Recall U01 repair in January 2018, but the same engine stall condition has returned. The recall remedy does not appear to have permanently corrected the problem.
The vehicle exhibits an intermittent, completely silent sticking and binding sensation in the steering wheel during gradual turns at highway speeds (occurring across all speeds between 20-80 MPH). The binding defect triggers during both left and right-hand gradual turns, requiring the driver to apply sudden, manual physical force to break past a resistance "notch" point, which is followed by a sudden return of power steering assistance.The vehicle's electrical system has been thoroughly diagnosed and isolated: a...
Read the full complaint
brand-new auxiliary and main battery were installed, and secondary 12V accessories were completely disconnected, verifying the charging system maintains a perfect, steady 14.1 to 14.2 volts under load while the steering binding continues to occur. This rules out standard battery/alternator low-voltage failure.The vehicle was brought to a certified Chrysler dealership where a technician test-drove the minivan and explicitly witnessed, verified, and confirmed the bi-directional steering binding failure in real-time. Despite the physical failure being witnessed, the vehicle's computer is not throwing any active dashboard warning lights or standard diagnostic trouble codes (DTCs). This vehicle matches the exact model year, mileage bracket, and dangerous high-speed sticking characteristics currently under active federal investigation by the ODI under NHTSA Action Number PE25009.
While driving, the engine stalled and produced a cranking noise. Subsequently, the display screen turned black. Currently, I am experiencing a problem where I cannot turn off the vehicle or shift gears, rendering it immobilized. I have taken the vehicle to a Chrysler dealership, and they have been unable to identify any faults. However, I believe the vehicle is not safe to drive.
The contact owns a 2017 Chrysler Pacifica. The contact received notification of NTHSA Campaign Number: 24V536000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
I've noticed within the last couple months that every once in a while the steering seems to stick. It will happen randomly, we will be driving and if turning the steering wheel to the 3 o'clock or 9 o'clock position it feels like it sticks. We really feel it sticking at random times when we are traveling at slower speeds and turning sharply, it will stick and then all of a sudden let lose and slightly jerk back to position.
While driving my 2017 Chrysler Pacifica at highway speeds the steering wheel locks or sticks in a curve and is extremely scary! This happened to me back in 2022 and took several trips to the dealer to determine the problem as they could not recreate the occurrence. After several attempts they found recall V53/NHTSA 19V-348, they followed the recall and returned the vehicle to me in August of 2022. Everything working great until Now AGAIN in 2026 4 yrs later while driving at highway speeds the vehicle is doing...
Read the full complaint
the EXACT same thing, I returned to dealership that fixed recall V53 to perform the same recall, they stated the recall only has a 2 yr warranty and that I must pay a $250 diagnostic, I refused and called Chrysler Recall and they stated the same thing, this is ABSOLUTLEY RIDICULOUS! This is a major safety issue that could cause an accident and should be a lifetime warranty recall, the fact that the safety of their costumers and all others on the road is not their top priority is baffling! I'm extremely disappointed in the dealership and Chrysler and am now reconsidering buying a Chrysler when I get a new car next year.
Steering wheel sticking at 11 and 1 o clock position, has become very difficult to turn and feels like overcorrecting to keep vehicle in center of lane.
The backup camera rarely works anymore. It will show a variety of the following: - A blue screen - A black screen - A still image - It works correctly (Rarely happens). The still image is a great cause of concern for safety. It still shows the guiding lines as I am moving the steering wheel, so it almost looks like I am moving in real-time. If the still image is showing nothing behind my vehicle, it could cause me to back over something/someone because camera did not display real-time video. (Attached photos show...
Read the full complaint
a vehicle behind my car, but when I turn on the camera, there is a still image. The third image shows the guide turning on the still image). Dealer has stated it is a known issue, but there is not a recall. Many reports of this issue can be found in online forums. Vehicle has not been inspected by manufacturer, police, or insurance. There were no warning lamps or other symptoms prior to the failure. Issue has been intermittent for about a month.
While driving at highway speed, my 2017 Chrysler Pacifica PHEV suddenly entered limp mode, displaying a red turtle warning light and red battery icon, and lost propulsion. My family was forced to pull onto the shoulder of a busy expressway, creating an immediate safety risk to occupants and other drivers. The vehicle was towed to an authorized Chrysler dealership where it has remained for nearly four weeks. A wiTECH scan confirmed the Battery Pack Control Module is showing as unprogrammed. A second scan three...
Read the full complaint
weeks later confirmed the BPCM remains unprogrammed and three active DTCs are present. The dealership has confirmed these findings but is attempting to release the vehicle in this condition. Records show Recall 03A for loss of motive power was previously performed on this vehicle. The same symptoms have recurred, suggesting the recall remedy may not have been effective. The dealership is denying warranty coverage while refusing to program the BPCM that would confirm or deny that coverage. Stellantis customer care has closed my case twice without resolution. I have formally refused pickup on safety grounds.
Driving on highway with winding roads the steering wheel would stick on a slight turn. It would happen at the 11oclock & 1oclock position, mostly on a right curve. When correcting back you get a slight over steer. This happened over the 4 of July holiday 2026. At slower speeds it did not seem to happen. No warning lights or messages were displayed.
I have a big problem with this van's brakes I couldn't brake when I was driving on the freeway it didn't brake properly and so dangerous and I was terrified luckily didn't get into accident I complained about this issue to the nhtsa about this Chrysler Pacifica
The steering sticks when at highway speeds on curves. It can be made available for inspection upon request. Our safety is at risk when it sticks because over correction can make us flip the vehicle or collide with other drivers. This is a know issue with this car but I must empathize that it needs to a recall that would allow us to have this fixed for the safety of not only the drivers but for other people on the roads. The vehicle has been expected recently but the details of what they found wrong can not be...
Read the full complaint
located at this moment. You can contact the Crown Chrysler in [[redacted]] for more details. It's been an issue since we bought the vehicle used in 2023. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at 60 MPH, the steering wheel would stick when turned approximately to the one o'clock position, requiring to be jerked to operate as intended. The contact stated that when the failure occurred, the auto start-stop warning light illuminated, and the check engine warning light would intermittently flash on and off. The dealer and the manufacturer were not made aware of the failure. No further information was available. The failure mileage was approximately 123,630.
The back up camera does not turn on immediately. Sometimes it takes up to 3 minutes for it to turn on, after shifting into reverse. I understand this is a violation of the safety requirement for a back up camera. There is not an open recall for this particular issue on this VIN. The dealer service department confirmed the issue but has not offered a solution. It has not been inspected by the police or insurance representatives. There are no warnings or messages related to the issue. It first occurred approximately 1 year ago.
Chrysler Pacifica: every year compared
All Pacifica years2017 Chrysler Pacifica vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2017 Chrysler Pacifica | 1,547 | 11 | F | |
| 2017 Dodge Grand Caravan | 415 | 3 | C | Compare |
| 2017 Kia Sedona | 134 | 4 | C | Compare |
| 2017 Chrysler Town And Country | 0 | 1 | A | Compare |
| 2017 Chrysler Pacifica Hybrid | 0 | 5 | A | Compare |
| 2017 Honda Odyssey | 0 | 2 | A | Compare |
| 2017 Toyota Sienna | 0 | 10 | B | Compare |
| 2017 Chrysler 300 | 82 | 2 | B | Compare |
| 2017 Chrysler Pacifica Phev | 79 | 0 | C | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2017 Chrysler Pacifica
Does the 2017 Chrysler Pacifica have any recalls?
Yes - NHTSA lists 11 recalls for the 2017 Chrysler Pacifica: safety defect (December 2025); connectors / plugs / receptacles (January 2023); 12v / 24v / 48v battery (May 2019); front underhood (August 2018) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2017 Chrysler Pacifica?
By the complaints owners filed with NHTSA, the most common problem areas are the engine & cooling (539), transmission & drivetrain (474), electrical system (398).
How many complaints has the 2017 Chrysler Pacifica had?
1,547 complaints have been filed with NHTSA, the first on May 13, 2016 and the latest on November 10, 2026. Of these, 46 describe a crash and 11 a fire, and together they report 37 injuries and 0 deaths.
Is the 2017 Chrysler Pacifica a reliable vehicle?
Its Safety Index is 12 out of 100 (grade F: far more problems than a typical Chrysler Pacifica year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Chrysler Pacifica years have the most complaints?
2017 (1,547), 2005 (1,244), 2018 (902). See every Chrysler Pacifica year compared.
What should I do if my 2017 Chrysler Pacifica has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data