- The problem
- Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
- The risk
- An unsecured wheelchair can move during transit, increasing the risk of injury.
- The fix
- Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Vehicle safety record
2017 Chrysler Pacifica Problems, complaints & recalls
Owners have filed 1,547 complaints about the 2017 Chrysler Pacifica with NHTSA, most often about the engine & cooling (539) and the transmission & drivetrain (474). Those complaints describe 46 crashes, 11 fires and 37 injuries. It is covered by 11 recalls, the latest in December 2025 for the safety defect. For comparison, the 2016 has 2 and the 2018 has 902.
NHTSA data checked
FFar more problems than a typical Pacifica year, for its age
#3 most complained-about 2017 vehicle
- Complaints
- 1,547
- Recalls
- 11
- Crashes
- 46
- Fires
- 11
- Injuries
- 37
- Deaths
- 0
Most common 2017 Chrysler Pacifica problems
Share of all 1,547 complaints. One complaint can name more than one area. Tap an area for its complaints and recalls.
2017 Chrysler Pacifica recalls 11
Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do
- The problem
- Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
- The risk
- An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
- The fix
- Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2019 Pacifica vehicles equipped with engine stop/start systems. A loose battery ground connection may result in an intermittent loss of power steering assist and/or a stall.
- The risk
- A loss of power steering assist or a stall can increase the risk of crash.
- The fix
- Chrysler will notify owners, and dealers will inspect the battery ground surfaces, clean the contact surfaces as needed, and properly reassemble the ground connection, free of charge. The recall began May 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. FCA US' number for this recall is V53.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.
- The risk
- A vehicle stall can increase the risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles. The Manual Park Release (MPR) plug may be removed without a tool. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."
- The risk
- If the MPR is engaged unintentionally, the vehicle could roll away striking and injuring a bystander or cause a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the MPR plug, free of charge. The recall began July 9, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U50.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.
- The risk
- If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017 Chrysler Pacifica vehicles equipped with a 3.6l engine. The engine control software may become out of sync with the crankshaft position sensor, possibly resulting in an engine stall.
- The risk
- An engine stall can increase the risk of a crash.
- The fix
- Chrysler will notify owners, and dealers will update the engine control software, free of charge. The recall began March 7, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U01.
- The problem
- Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles equipped with the 8-passenger seating option. In certain passenger seating and vehicle situations, the second-row center seating position seat belt buckle could cause the left outboard seat belt to become unlatched.
- The risk
- Inadvertent unlatching of the left outboard seat belt can increase the risk of injury in the event of a crash.
- The fix
- Chrysler will notify owners, and dealers will install a shorter second-row seat belt buckle, free of charge. The recall began October 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T54.
- The problem
- Vantage Mobility International, LLC (VMI) is recalling certain 2017 Chrysler Pacifica lowered floor vehicles modified by VMI. The rear pinion bracket on both sides of the vehicle may crack, causing the axle not to be centered and the wheel to wobble.
- The risk
- A wheel wobble may cause a possible loss of control, increasing the risk of a crash.
- The fix
- VMI will notify owners, and dealers will replace the pinion brackets, free of charge. The recall began on August 14, 2017. Owners may contact VMI customer service at 1-800-488-9082. VMI's number for this recall is PAC20170728.
- The problem
- Vantage Mobility International, LLC (Vantage Mobility) is recalling certain 2017 Chrysler Pacifica lowered floor vans modified by Vantage Mobility for wheelchair accessibility. The affected vans have rear brake lines that might have been crossed during the modification. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
- The risk
- The crossed rear brake lines will cause the rear anti-lock brake system to be ineffective, increasing the risk of a crash.
- The fix
- Vantage Mobility will notify owners, and dealers will correct the rear brake line attachments, free of charge. The recall began on July 3, 2017. Owners may contact Vantage Mobility customer service at 1-800-488-9082. Vantage Mobility's number for this recall is Pac-20170525.
- The problem
- Chrysler (FCA US LLC) is recalling certain model year 2017 Pacifica vehicles manufactured February 22, 2016, through April 28, 2016. The center overhead seat belt stow clip may fracture and prevent use of the seat belt in the third-row and/or second-row center passenger seat (if so equipped).
- The risk
- If passengers occupying the third-row and/or second-row center seats cannot use a seat belt, there is an increased risk of injury in the event of a crash.
- The fix
- Chrysler will notify owners, and dealers will replace the third-row and, if necessary, second-row center overhead seat belt stow bezel, free of charge. The recall began on July 14, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S42.
What owners say
4 people checked this vehicle in the last 30 days. Problems or none - your experience is exactly what the next buyer is looking for. Write it now
1,547 complaints about the 2017 Chrysler Pacifica
Newest first, as filed with NHTSA by owners. Page 9 of 62.
On December 28, 2024 my family and I were in a crash with our Pacifica van. In a gradual left turn at approximately 40 mph, the van slowly drifted to the right. I slowly corrected to the left with no affect. After slightly more left correct, the van cut hard left and crashed head into a concrete wall on the opposite side of the roadway. The steering correction inputs should not have resulted in such a hard left turn. The drift to the right should not have occurred and I was not able to correct for some reason. ...
Read the full complaint
The vehicle was inspected by insurance and totaled. No other inspections were completed to my knowledge. There were no issues or warnings of a potential problem. We did suspect the lane keep assist system could have caused an over correction but have no way to confirm that.
Mine has a looseness feeling yet on inspection everything like tie rod ends are good. Definitely at the 11 o clock position I can get a shudder or shimmy even at low speeds. Despite it feeling loose it's tracking excellent on the highway like everything is tight. I also get a rattle like the tie rods are loose at speeds below 30. There is no looseness anywhere on inspection. If the wheel is shaken on a drive on lift you can feel the noise in the rack mostly on the left side. Happens every day.
The power steering sticks when making a gradual turn which makes it feel like it's not going to straighten back up so overcorrecting is easy if you're not careful. It happens intermittently and the dealer said they were unable to reproduce it but it happens on a regular basis.
The steering on my 2017 Chrysler Pacific sticks at the 11 and 1 position. It cause us over steer while driving down the road or on the interstate. It is very scary.
When turning the steering wheel it will feel like it gets stuck for a split seconds. It happens alot.
The vehicle had a recall a few years ago to install updates on the PCM computer for a stalling issue but it was never corrected. The vehicle still stalls on turns and on the highway and inside the Chrysler Dealership but the dealer was not able to identify the issue. It seems that the computer tries to correct the issue but it does not work. This is very dangerous when the vehicle stalls on the highway and the car does not start. Eventually it does start after the vehicle stops but my family and I are risking...
Read the full complaint
our lives when we drive the vehicle. In addition when going up a steep roadway, the vehicle is not able to drive up the hill easily and I have to pull over, the vehicle computer seems to make adjustments which take 30-60 seconds and then the vehicle is able to drive up the hill. Please contact me to look at the vehicle and identify the issue with it stalling. Thank you.
The steering gets stuck at the 11 o'clock position. The steering wheel does not respond immediately and is putting me in a dangerous situation and causing many close encounters with the vehicle oversteering in the neighboring lanes on the highway putting me and my family at risk for a major car crash. There was a past recall on the steering where the dealer checked the ground wire but no repair was made.
When I'm steering to the right of the highway, my van is hard to steer back onto the roadway.
While turning, my steering wheel will get stuck, sometimes causing me to over correct while trying to fix it. It has been happening for quite some time and seems to be an ongoing issue. It typically occurs when I'm going around a curve, not when I'm doing a complete turn. I am afraid this could cause an accident at some point.
The electric steering has a stiff jerk at random positions when taking a turn. It seems to happen at the 11 o clock and the 1 o clock positions on the wheel. It causes a stiffness when driving on a turn that causes myself to have to jerk the wheel to get it out of the stuck position, which causes the vehicle to jerk and causes panic. It seems to happen every time I drive the van, several times during a trip, basically every time I take a basic turn. The safety of my family is put at risk because it causes me to...
Read the full complaint
have to jerk the wheel to get the steering under control. This is a current on going investigation. There are no warning messages or lights on for this. Please investigate this and get this issue fixed. It's scary and dangerous to my family and others on the road.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed, the steering wheel failed to turn in the intended direction. In addition, the contact stated that the transmission slammed into gear while shifting. No warning lights were illuminated. The contact stated that the steering wheel pulled to the left while the contact was attempting to go to the right. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall; however, the VIN was not under recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 125,000.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at various speeds and making a turn, the steering wheel was sticking while making the turn, and after making the turn, it required an extra effort to turn the steering wheel. There was no warning light illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact related the failure to NHTSA Action: PE25009 (Steering). The manufacturer was not notified of the failure. The failure mileage was approximately 150,000.
I took my vehicle to the Chrysler dealership to have it check out because I noticed a hard shift when taking off when accelerating in first gear but they told me they couldn't duplicate the issues because their wasn't a check engine light on I've explained to them what I was feeling so they had me drive the vehicle with one of their technician and he seen exactly what I was talking about but they did nothing they told me when the check engine light come on in there a code they can read then they can see about...
Read the full complaint
fixing it this was back in 2020 and 2021 now the vehicle is starting to feel like it slipping worse in first gear and it has this suction noise in when is does shift hard it throws you and the passengers forward and the van only has 42,000 miles on it
Today I learned that there is an open investigation pertaining to the steering on my model of vehicle. What I orginally throught to be "normal" for the vehicle I now believe could be an issue. Since I have owned this van there have been numerous random times where I have been driving and it feels like my steeling wheel gots stuck in position and required extra effort to move it. It has always been in a gradual turn or curving of the road vs in a hard right or left turn. Additionally, there has been times where I am...
Read the full complaint
turning at a very low rate of speed, say to turn into a parking space, where I can feel what almost seems like a "bumping" sensation from the steering wheel through my hands. I have never been able to get the issues to occur when asking someone else if they feel or experience it.This is my first van that I have ever owned, so I assumed these to be little quirks of driving the vehicle. I guess I did not realize that me, my family or other's safety could be at risk during these episodes. There were no warning lights or indications that either event was ever about to occur. I have owned this vehicle since 2019 and the vehicle is available for inspection at anytime.
Steering has jerking sensation at higher speeds going around turns. Causing me to almost overcorrect. Safety of my children involved.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at various speeds and turning in either direction, the steering wheel became difficult to return to center. The vehicle was taken to the local dealer, who was unable to identify the cause of the failure. The vehicle was not repaired. The contact stated that the failure persisted. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 50,000. The VIN was not available.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed and making a left turn, the steering wheel became stuck. The contact had the pull the steering wheel to correct the failure. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 87,000. The VIN was unavailable.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving on several occasions at various speeds, and turning the steering wheel to the right, the steering wheel became stiff, and the contact had to forcefully maneuver the steering wheel to correct the failure. The vehicle was taken to an independent mechanic to be diagnosed, and it was determined that the power steering system needed to be replaced and reprogrammed. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 80,000.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at various speeds and making a slight turn in either direction, the steering wheel had become sticky and failed to return to center. During the failure, the driver forcefully turned the steering wheel back to center. The cause of the failure was not yet determined. The local dealer and manufacturer were not notified of the failure. The failure mileage was 60,000.
The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at various speeds and making a slight right turn, the steering wheel became sticky and failed to return to center as designed. The driver had to forcefully turn the steering wheel back to center. The cause of the failure was not yet determined. The local dealer and manufacturer were not notified of the failure. The failure mileage was 152,000.
Power steering issue when turning, if felt that the front wheels got stuck and then over corrected when I accelerated.
The contact owns a 2017 Chrysler Pacifica. The contact stated that occasionally, while driving at various speeds, the steering wheel failed to return to center after a turn to the left or the right. No warning light was illuminated. The contact scanned the vehicle; however, no error codes were retrieved. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 115,000.
Steering exhibits a sticking sensation on gradual right or left turns, like while driving along a wide sweeping cu4ve on a road. The steering hangs and does not return to center, and I have to pull it back to center.
Unknown. Steering wheel sticks most days. Happens especially when turning and driving around a curb. Have felt this multiple times a day.
I consistently have an issue with my steering wheel sticking in a turned position when making a full circle turn (for example: exiting a highway). The steering wheel will remain locked in this position, even with no hands on it, until jerked the opposite direction which seems to unlock it.
Chrysler Pacifica: every year compared
All Pacifica years2017 Chrysler Pacifica vs rivals
| Vehicle | Complaints | Recalls | Grade | |
|---|---|---|---|---|
| 2017 Chrysler Pacifica | 1,547 | 11 | F | |
| 2017 Dodge Grand Caravan | 415 | 3 | C | Compare |
| 2017 Kia Sedona | 134 | 4 | C | Compare |
| 2017 Chrysler Town And Country | 0 | 1 | A | Compare |
| 2017 Chrysler Pacifica Hybrid | 0 | 5 | A | Compare |
| 2017 Honda Odyssey | 0 | 2 | A | Compare |
| 2017 Toyota Sienna | 0 | 10 | B | Compare |
| 2017 Chrysler 300 | 82 | 2 | B | Compare |
| 2017 Chrysler Pacifica Phev | 79 | 0 | C | Compare |
More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.
Questions about the 2017 Chrysler Pacifica
Does the 2017 Chrysler Pacifica have any recalls?
Yes - NHTSA lists 11 recalls for the 2017 Chrysler Pacifica: safety defect (December 2025); connectors / plugs / receptacles (January 2023); 12v / 24v / 48v battery (May 2019); front underhood (August 2018) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.
What are the most common problems with the 2017 Chrysler Pacifica?
By the complaints owners filed with NHTSA, the most common problem areas are the engine & cooling (539), transmission & drivetrain (474), electrical system (398).
How many complaints has the 2017 Chrysler Pacifica had?
1,547 complaints have been filed with NHTSA, the first on May 13, 2016 and the latest on November 10, 2026. Of these, 46 describe a crash and 11 a fire, and together they report 37 injuries and 0 deaths.
Is the 2017 Chrysler Pacifica a reliable vehicle?
Its Safety Index is 12 out of 100 (grade F: far more problems than a typical Chrysler Pacifica year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.
Which Chrysler Pacifica years have the most complaints?
2017 (1,547), 2005 (1,244), 2018 (902). See every Chrysler Pacifica year compared.
What should I do if my 2017 Chrysler Pacifica has a problem?
If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.
Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data