- The problem
- Vehicle description: 4x2 pickup truck convertibles equipped with v6 engines (built from november 1988 - june 1990) and 4x2 pickup trucks equipped with the shelby package (built october 1988 - june 1989). The frame can crack at the steering gear attachment and/or the steering gear mounting bolts can fracture.
- The risk
- The steering gear can separate from the vehicle frame resulting in a loss of vehicle control increasing the potential for a vehicle accident.
- The fix
- Dealers will add reinforcements to the frame and replace the steering gear mounting bolts. If the frame is already cracked, the steering gear weld nuts will also be replaced. Owner notification began august 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1-800-853-1403.
Steering
1989 Dodge Dakota Steering problems
Owners have filed 19 complaints about the 1989 Dodge Dakota's steering with NHTSA - 30% of all its complaints, most recently on September 16, 2011. They describe 0 crashes, 0 fires and 1 injury. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
- Complaints
- 19
- Recalls
- 2
- Crashes
- 0
- Fires
- 0
- Injuries
- 1
- Deaths
- 0
Steering recalls for the 1989 Dodge Dakota
- The problem
- The frame can crack at the steering gear attachment and/or the steering gear mounting bolts can fracture.
- The risk
- The steering gear can separate from the vehicle frame resulting in a loss of vehicle control increasing the potential for a vehicle accident.
- The fix
- Dealers will add reinforcements to the frame and replace the steering gear mounting bolts. If the frame is already cracked, the steering gear weld nuts will also be replaced.
Steering complaints
Tl* the contact owns a 1989 dodge dakota. The contact was driving 50 mph when the power steering malfunctioned which prevented the contact from steering the vehicle in the right direction. The vehicle was taken to a local mechanic who diagnosed that the bolts on the rack and pinion were cracked. As a result, the rack and pinion would need to be replaced. The dealer was contacted who advised that the vehicle had exceeded the statute of limitations to receive repairs under nhtsa campaign id number: 96v094000...
Read the full complaint
steering:gear box (other than rack and pinion). The manufacturer was made aware of the problem who filed a report and advised that they would contact him back at a later date. The vehicle was not repaired. The failure and current mileage was 209,000. Updated 10/12/11*lj updated 10/14/11 *bf when the consumer attempted to slow down. He lost control of the truck, due to not being able to steer and ultimately ended up in a ditch. Updated 10/18/11 updated 10/26/11 updated 10/31/11 updated 3/30/12 *cn
Rack and pinion bolts fractured ,causing rack and pinion steering to separate from frame, resulting in loss of control. A recall has been issued on vehicle. Vehicle has been repaired under recall. Please provide further information.*Ak
While backing out of a driveway and turning rack and pinion steering separated from cross member of vehicle. Dealership informed consumer that this vehicle was not included in recall 96v094000. *Ak
Recall 96v-094000/ steering gear mounting bolt failure. Consumer stated that after recall repairs were done, driveability of the vehicle worsened. Consumer has notified the dealer about the problem. *Ak
Rack and pinion steering failed causing accident. Recall work done on the system prior to incident, however did not fix the problem.
Had received recall notice (#96v094000) & called dealer. Took vehicle in on appointment date. Was told vehicle ready & to take it home. Heard a pop a few hours later. Took it back on aug. 7, 1997 To have it repaired again. Was charged for labor done to vehicle. *Ak
96V094000, the vehicle was serviced for a recall on the steering and the rack and pinion broke 4 days later. *Ak
Recall # 96v094000, dealer does not have parts. Consumer has not contact dealer since october of 96 because dealer stated that they would contact when parts became available. *Ak
Steering gear attachment: has taken vehicle in for repairs since nov. And they don't have the parts. Took to two different dealers, one didn't have the arc welder , and the other dealer didn't have parts and said that he would not be getting them. *Ak
Recall work on the steering wheel reinforcement weld was never completed.
RACK AND PINION FAILURE.
Was driving and lost control, would not turn the steering right or left. This happened a year a go, received recall # 96v094000, took to dealer doesn't have a welder . *Ak
Recall work on the steering rack and pinion mount was not able to be completed due to parts missing.
After having the recall repair work done for the rack and pinion mount, the vehicle is now having a problem with the power steering. Recall#96v094000. *Ak
The consumer took the vehicle into the dealer to be repaired the dealer said that they needed a welder in order to finish the work and it has been at least 3 to 4 weeks since then the work has not been done. Please give more details.
Recall related, rack and pinion steering, , talked to dealership, they indicated parts are not available. *Ak
This is a unsatisfied consumer because the recall notice states that the work would be done within 2 hours and the dealer at hertiage dodge says that it will take 2 days. Please describe details. *Ak
Rack/pinion mounts weld broke, causing steering problems. *Dh
Steering column ripped out of the frame w/bolts still in place. Driver lost control running off road. Please describe details. Tt
Dodge Dakota steering complaints by year
Dakota steering problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data