"Takata recall" the power steering continues to leak even after several repairs have been made.
Steering
2000 Dodge Dakota Steering problems
Owners have filed 70 complaints about the 2000 Dodge Dakota's steering with NHTSA - 8% of all its complaints, most recently on July 15, 2018. They describe 4 crashes, 0 fires and 0 injuries. Loss of power steering, stiff or loose steering, wandering, column and rack problems.
- Complaints
- 70
- Recalls
- 0
- Crashes
- 4
- Fires
- 0
- Injuries
- 0
- Deaths
- 0
Steering complaints
It has been confirmed. I have received a second opinion and have been told intermediate drive shaft needs to replaced. I have researched this problem and am totally confused as to why chrystal has not yet issued a recall on this faulty part, it has been an ongoing issue for many dodge owners. All nhtsa needs to do is search it online. So many complaints and yet no action has been taken. I have written/ emailed to dodge corp. And was told that recalls need to be processed through nhtsa. Please anyone else having this problem file a complaint so dodge will finally do something about it!
Tl* the contact owns a 2000 dodge dakota. The contact stated that there was inadequate clearance between the front driver side brake tube and the power steering hose, which caused the power steering hose to become punctured. The contact referenced nhtsa campaign number: 00v193000 (service brakes, hydraulic). The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was 200,000.
Steering locking up due to faulty steering shaft universal joint. *Tr
Universal in the shaft wears out and causes excessive play in the steering wheel,and could break. Had to buy a new shaft off ebay,that dodge has since improved. *Tr
I owned 2000 dodge intrepid 3.2L vehicle(mileage-106000). Steering wheel lof my vehicle lost its control on wheels,while I was driving my car on i75(trying to change lane).I heard crunking sound and somehow manged to pull the vehicle to the shoulder.I towed the vehicle to maintainence shop and came to know that rack and pinion system got broke down and needs to be replaced.I was really lucky enough to be saved. How can I trust this vehicle later on,even though I replace the rack and pinion system.I found...
Read the full complaint
so many complaints about the same issue on this model vehicle in this website.Manufacturer should be the responsible for these defects? If the government doesn't take necessary action it would leads to fatal accidents in future.
Tl*the contact owns a 2000 dodge dakota quad cab. While driving 60 mph, the contact experienced difficulty steering the vehicle. The mechanic stated that the rack and pinion, ball joints, and tire rod needed to be replaced. The mechanic performed the repair. Approximately four years later, the vehicle experienced the same failures. The current mileage is 85,100 and failure mileage was 57,400.
Noise from engine compartment and vibration from steering wheel. Sounds as if power steering pump was low on fluid. Makes a load noise when steering became difficult to steer. Drove short distance to repair facility and was shocked that the high pressure hoses had split. Also the rack and pinion steering will have to be rebuilt if possible if not replaced. Also a boot was torn and has to be replaced. Work has not been started as I find it is necessary to get more than one estimate. The local garage wants in excess...
Read the full complaint
of $1200 for the repairs while the dealer wants over $2000. Approximately 12 months ago I had the upper ball joints replaced under warranty and had to get a front end alignment at an extra charge. No visual signs of wear was noticed. *Jb
Truck started to pull to right upon mid-level braking. Was told brakes ok, tie rod ends bad/replaced, no change. Then told rack & pinion bad/replaced, slight change, still pulls to right, getting worse. Now 3 months later and after $400.00 In repairs, I go with a different shop, I was told brakes caliper bolts are stripping out. This causes the brake shoes to move when braking, binding, then pulling the steering wheel out of hands. Has also caused right tie-rod end to go bad again. The biggest danger is that upon...
Read the full complaint
braking the steering wheel turns to the right and I could lose control of the truck. Have been trying to find a good used steering knuckle and all the ones found have the same problem. The fix is, if caught soon enough, heli-coil new threads or replacing the steering knuckle ($415.00 Part alone). *Jb
Dt*: the contact stated while driving various speeds on normal road conditions, the steering wheel malfunctioned on a worsening basis while trying to turn in any direction. The vehicle was taken to the local dealer, who determined the intermediate shaft of the steering column needed to be replaced. The vehicle was not included in any recall due to the vin. No replacements had been made. The contact encountered similar complaints on the nhtsa website # 10120725 regarding the steering column.
Dt*: the contact stated while backing out of an angled parking space, the passenger side tire would not turn. The contact determined the outer tie rod came apart. The vehicle was towed to the contact's residence and the contact repaired the vehicle. The manufacturer was alerted.
Rack & pinion was replaced 4/4/03...Normal noise signaling a problem. On 4/22/05, when backing out of my garage, the rack & pinion failed again and this time both tires went different directions. If I had been on the road, I might have been killed...I had no steering at all. It was even hard to get it moved the rest of the way out of the garage to get it towed, since both tires were free spinning. The repairman at hoover chrysler said he had never seen such a failure. My husband contacted chrysler to let them...
Read the full complaint
know of our second rack and pinion failure and the potential life threatening situation, and their response was that we should expect problems when a car is older. We do not expect life threatening problems! *Jb
On my 2000 dodge dakota my steering knuckle snapped past the tie rod on the wheel part of the right passenger side if the vehicle (front) this part is approximately a 1 inch by one inch of solid steel. This resulted in a crash with a parked manatee county patrol car. I believe this part should not have snapped under any circumstances. The investigating police offier agreed. I was not issued any traffic violation after the officer saw what had happened. I also believe this is a manufacturer defect that...
Read the full complaint
should be investigated . I plan to be following up on this with a phone call to your ageny. I wonder how many ticking time bombs are out there? I am aware of the recall of upper ball joints falling off and I am wondering if maybe defective steel is the cause. *Nm
I read in today's paper about the investigation of 2004-05 dakotas and durangos with the investigation into steering looseness and problems - our 2000 dodge dakota quad cab had to have the shaft replaced due to a broken connection - it had loosened for a long time until it affected our driving. The dealer repaired it to the tune of $ 250 and about 3 weeks later my minister had the same problem with her dodge durango also 2000 - the mechanic even said "do you know a mrs. Ksionzyk from your town - I just replaced the same thing on her dakota" I don't think this is a coincidence - this is a very small dealer and community. *Jb
Vehicle 2000 dodge dakota pick up 2 wheel drive. Failed new jersey motor vehicle inspection for ball joints. There was a letter about the upper ball joint failure. Upon inspection found both upper and lower ball joints have excessive play to the point where they may pull out of the socket.
Driving down the road made a complete stop started to make right turn but the tires did not turn luckiely I stopped just in time to prevent an accident the steering shaft that connects to the steering colum completly broke off therfore leaving me with no control of my truck. I replaced the steering shaft. The replacemen part has been replaced with a upgraded part. That lead me to believe the manufactuer knows about this problem. This could have been much worse if I was on the highway traveling at a much higher...
Read the full complaint
speed. I was out of 286.00 Dollars but I much rather be out of 286. Dollars than out of my loved ones.Please help before some body gets seriously hurt or loses thier lives. Dodge also have a recall on this truck problems with the conrol arms that could break and have no control of the steering this also leads me to believe why the the steering shaft on my truck broke off. *Ak
While driving at highway speed steering rack and pinion failed, causing the vehicle to pull to the left, and resulting in a collision. Consumer had the vehicle towed. Dealership will be notified.*Ak
While servicing vehicle for nhtsa recall campaign 04v596000 concerning upper ball joints it was determined that inner tie rods were bad due to wear.*Ak
Power steering pump went out while driving my 2000 dodge dakota with only 60,000 miles. Apparently the main seal blew out and all fluid leaked out causing difficult steering. Required that the entire pump be replaced. *Ak
While pulling inside of the parking lot, the vehicle started to vibrate. The noticed that the driver and passenger wheel failed to move on its own. The vehicle was towed to the dealer for inspection. The mechanic informed the consumer that the upper and lower ball joints and tie rod needed to be replaced. Please fill in additional information. *Jb
While driving 30 mph the upper ball joints failed. As a result, the steering also failed, causing the vehicle to crash into a guard rail. No injuries reported. *Ak
The vehicle's steering rack failed resulting in noise while steering. *Nm the vehicle was originally taken to the dealer to have the ball joint recall done. The consumer informed the dealer of a creaking noise in the steering and was informed that the noise was a symptom of the recalled ball joints. When the vehicle was finally taken to the dealer they indicated that the steering rack was faulty and causing the noise in the steering wheel. The consumer had to pay $1000. To have the steering rack replaced. The consumer believes this part should have been covered under the recall for the ball joints. *Nm
Steering column develops clunk. Is most notable on braking and acceleration. Original column replaced at end of 36000 mi warranty period. New unit developed same problem after 12000 mi. Concerned that failure may cause binding in steering and loss of control. *Nm
On the evening of november 4, 2004, the right front tire assembly of my 2000 dodge dakota pickup truck fell off. My 17 year old son was making a right turn into the driveway of a friend's home when he heard a loud bang. When he got out of the truck he found the right front-end of the truck resting on the wheel assembly. The following morning, the truck was towed to a local repair shop that I use for car maintenance and repair. Upon arrival at the repair shop, the shop owner told me that the upper ball joint had...
Read the full complaint
failed. As a result of the failure, the lower ball joint and outer tie rod were also damaged and had to be replaced. Based upon the mileage on the truck, the shop owner told me that the ball joint should not have failed. Total cost to repair the upper and lower ball joint and the outer tie rod was $595.67. *Nm
Consumer stated she had to have the lower ball joint, and tie rod replaced. *Ak
Dodge Dakota steering complaints by year
Dakota steering problems, every yearSource: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data