Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Suspension

Grand Design Reflection Suspension problems by year

28 complaints filed with NHTSA about the Grand Design Reflection's suspension. Broken springs, struts, control arms, ball joints, noises and alignment that won't hold.

Suspension complaints by model year

YearSuspension complaintsCrashesInjuriesRecalls
20260001
20250001
20242000
20231001
20222000
20214000
20202000
20192001
20185000
20175000
20162002
20153002
20140001

Suspension recalls

Latest Reflection suspension complaints

2022 Grand Design ReflectionSuspensionBody, doors & structure

We purchased the coach fall 2022. First major trip was in summer 2023. The main slide out failed (stopped working halfway out and would not extend or retract) the second night of camping. There was not a local repair facility available. A mobile repair person was able to get the slide out retracted. He informed us there was only one screw holding the main slide out frame in place. We wrapped a ratchet strap around the coach to hold the slide out in so we could at least continue our trip. A remote repairman at out...

Read the full complaint

next stop reported this is a common occurrence on this coach and it would need to be completely rebuilt. We noted that during transport there was sawdust on the cabinets and floors which we have been informed is evidence of excessive frame flexing. We took the coach back to the dealer from which we purchased the unit. The slide out had to be completely rebuilt (new rails, new slide blocks, new motors). We have little confidence that the slide out will not fail again. We noted that the rear tires were wearing at a rate of more than 4 times faster than the front tires. The excessive wear was accompanied with concern that we would blow a tire on the road and cause an accident and/or injury. A Lippert representative was consulted who advised that the front axle was defective and had to be replaced. Our extended warranty did not cover the cost of the axle. The next major trip was in summer 2024. The main slide out failed again. A repairman noted that the motors and rails needed to be replaced again and that the frame was at the limit of being within specs and may have contributed to the problem. During that repair the repairman noted cracking in the roof seams at the major junction at the front of the camper and around AC units and vents. Each of those areas had been resealed just 5 months earlier. We were informed that this was also evidence of excessive frame flexing. The repair facility diagnostician reported that the roof needed to be scraped and resealed.

Filed Incident Suspension · Structure · Unknown or otherNHTSA 11649791
2021 Grand Design ReflectionSuspensionWheels & tires

The Driver side rear outer wheel bearing seized and the wheel including drum came off the axle while driving about 30mph. The wheel rolled down the road but fortunately did not hit any other vehicles. The RV was towed to RV dealership. Dealership could not determine root cause of failure. The RV had approximately 10,000 miles on the trailer before incident. The bearings has been inspected and repacked prior to trip by certified RV tech. Before trip started RV was weighed at CAT certified truck scale and combined...

Read the full complaint

rear axle weight was 9200 lbs. Each axle is rated at 5200 lbs. Owner of RV contacted Dexter Axle, the manufacturer of the axle. As a second owner, warranty was no longer valid. Dexter representative did state that the replacement 5200lb axle outer bearing has been changed to a larger bearing. The representative stated that the reason for change was not due to reported failures but consolidation. The owner had both axles replaced with 6000lb axles and has driven 1250 miles since incident.

Filed Incident Suspension · WheelsNHTSA 11633318
2022 Grand Design ReflectionSuspensionBody, doors & structure

While returning from a recent camping trip my wife while following the trailer home noticed the house structure was swaying and bouncing too much. She had thought the rig would fall apart. We arrived home and notice that the slide was out 2-4 inches, the cabin door had opened, an interior wall had separated from exterior wall and a side wall had flexed 2 or more inches out by another slide. There was bends and creases in the exterior metal side skirting that needed to be secured for travel. on approximately 11/04 ...

Read the full complaint

we turned in the rig for repairs to Happy Daze RV. They Have since made us aware of frame cracks through out the trailer. We have not been notified of who or how the repairs will be handled.

Filed Incident Suspension · Unknown or other · StructureNHTSA 11628876
2021 Grand Design ReflectionSuspension

I habe a 2021 Grand Design Reflection 303 RLS. The frame is cracked on both side just above the center spring shackles, I have also noticed frame flex between the pin box of the hitch and the rv body. I noticed the cracks when setting up the rv for the weekend and the frame flex driving down the road. I do not have any pictures of the cracks, but did attach a document to reference the frame crack and procedure to repair. The rv is at the dealership now being evaluated.

Filed Incident SuspensionNHTSA 11626711
2021 Grand Design ReflectionSuspensionBody, doors & structure

In 2021, we began noticing wall movement in the interior of the RV, fasteners, paneling and interior walls getting loose and moving. After more trips we noticed scratches in the flooring and wood chips laying on the interior floor when we would push the main slide out. We also began noticing the large slide didn't seem to be closing tight to the outside wall on one end. After more inspection we noticed large roller marks appearing on the underside of the main slide. We scheduled our unit into the dealership for...

Read the full complaint

review. The Dealership identified bent frame rails, twisted spring hangers, frames cracks, bent outriggers on the frame supporting the outside walls. The dealership contacted the manufacturer and the manufacturer sent one of their service repair technicians (SRT) to my dealership for an inspection. Because we have heard and seen issues with broken springs, spring hangers and the risk they create from losing springs, wheels and axles etc. the dealership advised that using the RV was not an option until the manufacturer approved it for use. As a result, several trips were cancelled for potential safety reasons. The SRT and the dealership believed that the unit had to go back to the factory for inspection and proper repairs. The unit has gone back to the manufacturer and the frame manufacturer where major frame work has been completed. Now we have a reworked, modified, weak frame and based on the report I've seen from the frame manufacturer I'm concerned that they didn't go far enough and only worked on adding support to 4 of the 6 spring hangers and the related frame areas. It appears that the work done to fix the frame has raised the overall height of the unit 2 -3 inches and added weight to the unit which affects the weight sticker on my RV. I have asked but still haven't received an engineering specification that dictated the work done to the frame to help build confidence and make this a safe and reliable RV.

Filed Incident Suspension · Unknown or other · StructureNHTSA 11625771
2024 Grand Design ReflectionSuspension

The entire rear section/walls of the camper have lifted and separated from the main frame. A licensed RV specialist has inspected the unit, and determined the main frame has severe issues and the unit should not be used or moved. There were several warning signs brought to the attention of Grand Design but they dismissed it as being within 'tolerance'. I'm a licensed contractor of 39 years and proved to them there is a major issue, but even their own service response technician dismissed it as being in 'tolerance'....

Read the full complaint

Now it has turned into a catastrophic failure. I demanded Grand Design come and take it away. I let them know it has major failure and is a safety hazard, they sent a driver to tow it back to their factory, I even let the driver know it should not be towed because the entire body at the rear has separated from the frame and could detach causing further risk to him and others. They didn't care, and away it went. Mine isn't the only one. There are several other I found out about that the body was detaching from the frame.

Filed Incident Suspension · Unknown or otherNHTSA 11587981
2018 Grand Design ReflectionSuspension

Own 2018 Grand Design (GD) RV with a broken Lippert (LCI) spring hanger that holds the axle in place, not discovered until maintenance. Photos available. Research reveals longevity, LCI knowledge, fix, number of & lack of notification. Contacted dealer, GD & LCI about safety defect told "Out Of warranty." Not warranty, safety. The GD RV requirement or LCI frame equipment component issue is the spring/axle hanger. Other RV manufactures utilize Lippert frames with the same component/condition. LCI RV frames...

Read the full complaint

experience a higher rate of spring/axle hanger failures than RV manufactures Northwoods or Outdoor RV that design and construct their own RV frames. Info GD Forum. Attached #1, 2, 3, 4. There are more. 7/2014 NHTSA Recall # 14V-288 Starcraft. #5 10/7/2016 Keystone Rv RECALL: 14V-146 Safety Advisory: 14-205. #6 4/ 23/2021 LGS Industries Inc, #7 Recalls based on quality. Current cause unknown, "may fail during travel leading to an increased risk of loss of control and vehicle crash" remains the same. March 6, 2022, post describes in detail the broken spring hanger issue, includes a mechanical drawing dated 2003 of Lippert designed V modification fix. #8 LCI Publication LIP-0135 revA, AXLE RETRO PROCEDURE developed for 2009 Open Range RV. Page 2, information/drawings how to modify spring hanger, with V mod. #9 On 12/2020, a post "This is what the spring hanger looks like with the V reinforcements factory installed on my '21 31G." Is Lippert now installing the V mod on new frames? #10 Educating RV owners, the importance of inspection & available V mod of potential hanger failure, would result in safer roads for owners & public. GD & LCI's current absence of responsibility & involvement is unfair.

Filed Incident SuspensionNHTSA 11587832
2024 Grand Design ReflectionSuspension

Took delivery of this new 2024 on [[redacted]], 2024. There has been a know problem with the rear stabilizing jacks being installed too long. Lippert is the manufacture of the jacks and their specifications require that the rear jacks be at least 7" from the ground in travel mode. Mine measure 3-5" from the ground when attached to the truck and level. This creates a a dangerous issue if a jack strikes the ground during travel and comes loose. It was conveyed to me that Grand Design made changes to this by...

Read the full complaint

installing a shorter rear jack system beginning in March of this year which did not happen on this unit. This is the correspondence with the dealer that I purchased from when I inquired about the potential jack issue prior to the sale. .................. We just spoke with our Reflection Rep and he says that Lippert has taken care of the jack issues and there shouldn't be anything for you to worry about concerning them. If you have any other questions in the meantime, let me know! Thanks, Jordan Land INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Incident SuspensionNHTSA 11587162
2023 Grand Design ReflectionSuspensionBody, doors & structureEquipment & accessories

The contact owns a 2023 Grand Design Reflection RV. The contact stated that the RV was designed with an electric leveling system. The contact stated the two rear levelers failed to elevate beyond 4.5 inches from the ground. The contact stated that the levelers would strike the ground while driving over a speed bump or on a bumpy road surface. The contact stated that the issue was a safety concern because it could cause damage to the RV while driving. The dealer was notified of the failure and referred the contact...

Read the full complaint

to the manufacturer for assistance. The vehicle was not diagnosed or repaired. The manufacturer was contacted but declined to provide shorter levelers. The failure mileage was approximately 200.

Filed Incident Suspension · Structure · EquipmentNHTSA 11558983
2019 Grand Design ReflectionSuspension

In April 2023 during an inspection to correct a misalignment of my 2019 5th wheel trailer's dual axles, it was discovered by the servicing shop (Straight Line Suspension, Mesa AZ) that the left rear spring hanger had failed causing one of the axles to become misaligned. Straight Line informed me that this was a very unusual situation but we assumed it was a one off situation which was then corrected by Straight Line. On September 24, 2023 while traveling on Interstate 40 in western Arizona several vehicles blew...

Read the full complaint

their horns at me and indicated that I should pull off to the side of the road. As I slowed down and began to get out of the active lane I heard a tire blowout. After stopping on the side of I-40 I discovered that the blowout was a result of the right rear spring hanger had broken apart and subsequently hitting the inside of my right rear tire and totally destroying it. At this point the rear of the spring and axle was no longer connected to the chassis. I contacted a towing company who had to chain up the floating axle in order to tow me to the nearest exit. After I located a mobil welder to temporarily patch the broken hanger and was able to limp home with my trailer. I contacted Grand Design and they informed me that since it was over 1 year since I bought the new trailer from them it was out of warranty but suggested that I contact Lippert Components who was the OEM of the defective chassis and spring hanger. Since there are a total of 3 hangers on each side I asked that they pay to replace the broken one plus the other 4 that had not yet broken off. They asked that I get an estimate to replace the broken hanger and the other hanger that I already replaced 5 months earlier. They refused my request to replace the total of 5 hangers that were still part of their original build. If additional hangers had broken loose at that time it is likely that 1 or 2 axles could have broken free from the trailer and possibly cause a catastrophic situation.

Filed Incident SuspensionNHTSA 11554661
2020 Grand Design ReflectionSuspension

The rear drop brackets on both sides of the back axle of my 5th wheel RV failed and broke off. The drop brackets attach the leaf springs to the RV frame. While pulling the RV, I noticed a sudden change in how the RV was pulling and it seemed to be unstable. I pulled over and while looking for a cause, I found the broken brackets. I was near a Camping World RV repair store, so I towed it there where the brackets and frame where repaired. Had this occurred at highway speeds, the axle could have become so...

Read the full complaint

unstable that it broke the remaining brackets which would lead to a complete loss of the axle on the highway and whatever disaster would occur after that. This definitely would have put other drivers and their families lives at stake. I researched this on the Grand Design owner forum board and found that this same problem has occurred to other RV owners. Looking at the broken bracket prior to repair, it appeared to be an inferior cast metal that didn't seem appropriate for such an important part under stress. I contacted Lippert, manufacturer of the frame, to notify them of the incident.

Filed Incident SuspensionNHTSA 11548361
2020 Grand Design ReflectionSuspension

The right rear spring hanger broke away from frame while driving through a construction area with little to no room to maneuver.

Filed Incident SuspensionNHTSA 11474668
2021 Grand Design ReflectionSuspension

While parked in an RV park I discovered that the right rear spring hanger on my fifth wheel RV had fractured and separated immediately adjacent to a weld line. I am unaware of any incident that can explain this damage, although I did hear a clunk while auto leveling the vehicle at our campsite. (Auto leveling is computer controlled and is a routine operation.) Inspection of the intact left rear spring hanger reveals what appears to be a small crack that may be the beginning of a similar problem on that side. An...

Read the full complaint

undetected failed spring hanger when traveling at highway speeds can obviously be a cause of severe property damage and death. Research of this problem in user groups and forums revealed that it is well known to vehicle owners. Anecdotes of broken hangers abound, as do user-invented fixes. Interestingly, Lippert (aka LCI, who is the manufacturer of the vehicle frame) reportedly has a repair for the problem that it has retrofitted to some vehicles and is apparently using in some newly manufactured vehicle frames. The fix is to add a 'V-brace' that is welded to the spring hangers and increases their strength. Example: https://gdrvowners.com/forum/operation/suspension-amp-brakes/52915-spring-hanger-advice There are no recalls for my trailer suspension that I can find, so despite apparent knowledge of the issue the manufacturers of both the frame and the vehicle have failed to warn me or others of it. I am now working with both Grand Design and Lippert to solve this problem on my vehicle. I will press for confirmation that the 'V-brace' is a viable repair that won't violate my warranty and will press to have it implemented on my fifth wheel RV.

Filed Incident SuspensionNHTSA 11451734
2018 Grand Design ReflectionSuspension

The contact owns a 2018 Grand Design Reflection. The contact stated that during maintenance of the vehicle, he noticed that the driver's side rear upper shackle pin on the Dexter trailer axle was not drilled to allow lubricant grease to enter, causing the pin and spring to dry out. The vehicle was not taken to a dealer. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 9,000. Consumer contacted the RV manufacturer, Grand Design, who suggested he follow up with axle manufacturer, Dexter.

Filed Incident SuspensionNHTSA 11439033
2017 Grand Design ReflectionSuspension

Noticed the left side of the 5th wheel seemed lower, the smell of burning rubber was highly present. Upon further investigation noticed the front axle leaf spring had broken. Noticed the new tire was hot and rubbed up on and caused damage to the metal of the chassis and ruined the new tire.

Filed Incident SuspensionNHTSA 11428412

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked daily. Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience