Check a vehicle VIN check Latest recalls Latest complaints Common problems Rankings Compare vehicles Recall roundups All makes Guides Share your experience
Theme

Vehicle safety record

2007 International 7400 Problems, complaints & recalls

No owner complaints about the 2007 International 7400 have been filed with NHTSA. It is covered by 6 recalls, the latest in February 2008 for the engine and engine cooling.

NHTSA data checked

DMore problems than a typical 7400 year, for its age

Complaints
0
Recalls
6
Crashes
0
Fires
0
Injuries
0
Deaths
0

2007 International 7400 recalls 6

Recall repairs are free. Your dealer fixes them whether or not you bought the car there - check your VIN at nhtsa.gov/recalls to see if yours is done. What to do

Engine and engine cooling

08V08900034,993 vehicles affected

The problem
International is recalling 34,993 my 2006-2008 school and transit buses and heavy duty trucks/tractors manufactured between june 1, 2006 and june 28, 2007, equipped with international dt466 or dt570 engines. The base plate of the engine oil cooler may crack allowing pressurized oil to leak into the engine compartment.
The risk
This condition may cause either engine shut down without warning, or in extreme cases, possible engine fire which can lead to property damage, personal injury, or death.
The fix
International will notify owners and repair the vehicles free of charge. The recall began on november 21, 2008. Owners may contact international at 800-448-7825.

Parking brake

07V31400010,882 vehicles affected

The problem
On certain 6x4 or 6x6 trucks with air brakes or tractors with air brakes and equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
The risk
This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
The fix
International is working with bendix to repair these vehicles (please see 07e-037). Bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. The recall began on september 28, 2007. Owners may contact bendix at 440-329-9000 and international at 1-800-448-7825.

Suspension: spindle

07V222000230 vehicles affected

The problem
On certain trucks, the rear-rear axle brake slack adjusters may contact the rear axle housing preventing the brakes from being fully applied possibly causing extended stopping distances.
The risk
Extended stopping distances can contribute to a vehicle crash that may result in property damage, personal injury or death.
The fix
Dealers will replace all rear-rear axle brake spiders with a spider that has a different brake group clocking angle free of charge. The recall began on june 29, 2007. Owners may contact international at 1-800-448-7825.

Suspension: non-powered axle assembly

07V1790001,172 vehicles affected

The problem
On certain trucks, one or both rear axle housings may contain thinner material than what is necessary for normal vehicle operation. Over time, this thinner material may result in a fatigue failure of the rear axle housing, possibly in the location of the brake flange.
The risk
A crack in the brake flange location of the rear axle housing may result in a wheel end lockup or wheel separation possibly resulting in property damage, personal injury, or death.
The fix
Dealers will inspect the vehicle's rear axles and, if necessary, replace the axle housings. The recall began on may 18, 2007. Owners may contact international at 1-800-448-7815.

Suspension

06V38400087 vehicles affected

The problem
On certain trucks equipped with chalmers rear suspensions, the adjustable torque rod end castings may be brittle. A brittle rod end casting may fracture without warning, causing the vehicles' rear axles to become misaligned.
The risk
This misalignment can cause the vehicle to lose directional stability at speeds that may result in a vehicle crash.
The fix
Dealers will inspect the vehicles to determine if they were manufactured with a suspect torque rod end. If a suspect torque rod end is found, the entire torque rod will be replaced. The recall began on october 6, 2006. Owners may contact international at 1-800-448-7825.

Parking brake: air

06V2310001,401 vehicles affected

The problem
On certain trucks equipped with sr-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. If the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button.
The risk
The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash.
The fix
Dealers will inspect the valves and replace it free of charge. The recall began on july 21, 2006. Owners may contact international at 1-800-448-7825.

What owners say

Be the first 7400 owner to share.

Problems or none - your experience is exactly what the next buyer is looking for. Write it now

No complaints about the 2007 International 7400 yet

No owner has filed a complaint about this vehicle with NHTSA. If yours has a problem, share it here and report it to NHTSA.

International 7400: every year compared

YearComplaintsRecallsCrashesFiresTop problemGrade
20110400-C
20100100-A
20090300-C
20080300-C
20070600-D
20062401Electrical systemD
20051300BrakesC
20040600-D
20030400-C
All 7400 years

2007 International 7400 vs rivals

More sales usually means more complaints, so compare similar vehicles of the same year. The grade compares each vehicle with its own model's other years.

Own a 2007 International 7400? Share your experience.

Your experience goes live straight away and helps every owner and buyer who checks this vehicle. Anonymous, free, no account.

Overall, how would you rate it? *

0/4000 · Please leave out names, phone numbers and your full VIN.

By posting you confirm it's your own, honest experience and agree to the rules. Safety defect? Also report it to NHTSA - that's how recalls start.

Questions about the 2007 International 7400

Does the 2007 International 7400 have any recalls?

Yes - NHTSA lists 6 recalls for the 2007 International 7400: engine and engine cooling (February 2008); parking brake (July 2007); spindle (June 2007); non-powered axle assembly (April 2007) and more. Recall repairs are free at any authorized dealer. Enter your VIN at nhtsa.gov/recalls to see whether yours has been fixed.

How many complaints has the 2007 International 7400 had?

None have been filed with NHTSA so far.

Is the 2007 International 7400 a reliable vehicle?

Its Safety Index is 28 out of 100 (grade D: more problems than a typical International 7400 year, for its age). The index weighs complaints, crashes, fires, injuries, deaths and recalls against how long the vehicle has been on the road, compared with the same model's other years. It is not a measure of every repair - read the complaints and owner experiences, and have any used vehicle inspected before you buy.

Which International 7400 years have the most complaints?
What should I do if my 2007 International 7400 has a problem?

If it is a safety problem, stop driving it if it is unsafe and contact your dealer. Report it to NHTSA at nhtsa.gov/report-a-safety-problem - enough reports start investigations and recalls - and share your experience here so other owners know what to look for.

Source: U.S. National Highway Traffic Safety Administration (NHTSA) complaints and recalls, checked . Complaints are owners' own reports and are not verified. How we use the data

Owners helping owners

Know before you drive.

Every experience you share - good or bad - shows on that vehicle's page and helps the next owner and buyer. Two minutes, anonymous.

Share your experience